Comparisons between marine productivity and terrestrial input records in the Gulf of California over the last 28 ka

We study the marine and terrestrial contributions in the Gulf of California (GC) to understand the relationship between continental climate and oceanographic variability over the last 28 ka. In Core AII125-8-JPC-20, we examine aeolian and riverine inputs as nutrients for biological productivity. We use biogenic silica (%opal), total organic carbon (%TOC) and calcium carbonate (%CaCO₃) as proxies for primary productivity, and lithic fraction distributions as proxies for terrigenous transport. At the core site, biogenic and lithic components are in phase at millennial-scale in response to regional climate conditions. During the Late Pleistocene, the GC shelf area was above sea level and the western margin showed transient episodes of increased fluvial inputs. Episodic increases in %opal and reduced %TOC suggest upwelling events but ineffective C-export to the sediment. During stadial events (Heinrich 2, Heinrich 1, Younger Dryas), regional declines in %opal, but increases in %CaCO₃ and TOC, suggest efficient C-export by carbonate organisms. During most of the Holocene, dust inputs are higher. Episodic increases in %TOC suggest higher C-accumulation, although this is not controlled by siliceous or calcareous organisms. In the GC, besides upwelling and current advection, nutrient inputs driven by terrestrial climate have an impact on the biological C-pump. © 2020 John Wiley & Sons, Ltd.     

Comparison of Large-Eddy Simulation Data with Spatially Averaged Measurements Obtained by Acoustic Tomography – Presuppositions and First Results

An attempt is made to compare results oflarge-eddy simulation (LES) in a convective boundarylayer using the model PALM with experimental data obtained from acoustic travel time tomography.This method provides two-dimensional data arrays, which are considered as more suitable forLES-validation than classical local orline-integrated measurements, because the tomographic data are area- or volume-averaged.For a quantitative comparison with experimental data in general, some prerequisites have to be considered: First of all, the initial and boundary conditions of the LES model have to be provided correctly by the experiment. Considering measurement errors, a sensitivity study was performed to investigate the influence of inaccurate initial and boundary conditions on the simulation results.This showed that for determining some boundary conditions, such as the surface temperature and the roughness length, high measurement accuracies are necessary, which are difficult to reach or which at least require considerable extra measurement efforts.The initial and boundary conditions provided by the Lindenberg experiment in 1999 turned out to be of insufficient accuracy to allow quantitative comparisons.However, a qualitative comparison was performed instead to investigate if the acoustic tomography method is a proper method for comparisons with LES models in general.It showed a good qualitative agreement with some quantitative differences. These differences can partly be explained by the sensitivity of the LES to initial and boundary conditions and by the limitations of the acoustic tomography.     

Origins and accumulation of organic matter in expanded Albian to Santonian black shale sequences on the Demerara Rise, South American margin

Ocean Drilling Program Leg 207 recovered thick sequences of Albian to Santonian organic-carbon-rich claystones at five drill-sites on the Demerara Rise in the western equatorial Atlantic Ocean. Dark-colored, finely laminated, Cenomanian–Santonian black shale sequences contain between 2% and 15% organic carbon and encompass Oceanic Anoxic Events 2 and 3. High Rock-Eval hydrogen indices signify that the bulk of the organic matter in these sequences is marine in origin. However, δ¹³C_org values lie mostly between −30‰ and −27‰, and TOC/TN ratios range from 15 to 42, which both mimic the source signatures of modern C₃ land plants. The contradictions in organic matter source indicators provide important implications about the depositional conditions leading to the black shale accumulations. The low δ¹³C_org values, which are actually common in mid-Cretaceous marine organic matter, are consequences of the greenhouse climate prevailing at that time and an associated accelerated hydrologic cycle. The elevated C/N ratios, which are also typical of black shales, indicate depressed organic matter degradation associated with low-oxygen conditions in the water column that favored preservation of carbon-rich forms of marine organic matter over nitrogen-rich components. Underlying the laminated Cenomanian–Santonian sequences are homogeneous, dark-colored, lower to middle Albian siltstones that contain between 0.2% and 9% organic carbon. The organic matter in these rocks is mostly marine in origin, but it occasionally includes large proportions of land-derived material.     

Localized shock-induced melting of sandstone at low shock pressures (<17.5 GPa): An experimental study

Shock-induced recovery experiments were performed to investigate melt formation in porous sandstones in the low shock pressure regime between 2.5 and 17.5 GPa. The sandstone shocked at 2.5 and 5 GPa is characterized by pore closure, fracturing of quartz (Qtz), and compression and deformation of phyllosilicates; no melting was observed. At higher pressures, five different types of melts were generated around pores and alongside fractures in the sandstone. Melting of kaolinite (Kln), illite (Ill), and muscovite (Ms) starts at 7.5, 12, and 15 GPa, respectively. The larger the amount of water in these minerals (Kln ~14 wt%, Ill ~6–10 wt%, and Ms ~4 wt% H₂O), the higher the shock compressibility and the lower the shock pressure required to induce melting. Vesicles in the almost dry silicate glasses attest to the loss of structural water during the short shock duration of the experiment. The compositions of the phyllosilicate-based glasses are identical to the composition of the parental minerals or their mixtures. Thus, this study has demonstrated that phyllosilicates in shocked sandstone undergo congruent melting during shock loading. In experiments at 10 GPa and higher, iron melt from the driver plate was injected into the phyllosilicate melts. During this process, Fe is partitioned from the metal droplets into the surrounding silicate melts, which induced unmixing of silicate melts with different chemical properties (liquid immiscibility). At pressures between 7.5 and 15 GPa, a pure SiO₂ glass was formed, which is located as short and thin bands within Qtz grains. These bands were shown to contain tiny crystals of experimentally generated stishovite.     

Microscopic evidence of stishovite generated in low‐pressure shock experiments on porous sandstone: Constraints on its genesis

It has been almost exactly half a century since the first synthesis of stishovite in shock experiments on quartz was reported, but its formation conditions during shock is still under debate. Here, we present direct transmission electron microscopic observation of stishovite within material recovered from high‐explosive shock experiments on porous sandstone shocked at 7.5 and 12.5 GPa. Our observations allow for new conclusions on the genesis of stishovite in a close‐to‐nature environment. The formation of stishovite in short‐time shock experiments proves that its crystallization is ultrafast (<1 μs). Crystals were found only embedded in amorphous veins indicating homogeneous nucleation. Crystallization from melt rather than from glass can be concluded from the observation of roundish, defect‐free crystals up to 150 nm in diameter embedded in nondensified glass. The formation of stishovite at 7.5 GPa is in accordance with the phase diagram of silica, if rapid undercooling is present that becomes only possible by the existence of small hot spots in an otherwise cold material, which is supported by transient heat calculation. The absence of coesite at 7.5 GPa suggests kinetic hindrance of its crystallization from melt and, thus, smaller critical cooling rates compared to stishovite where critical cooling rates are estimated to be as large as 10¹¹ K s^?1. While the amorphous veins containing stishovite represent unambiguously hot spots, no associated pressure amplification could be verified within these veins. The rapid liquidus crystallization of stishovite only in hot spots generated in porous material is an alternative formation mechanism to the widely accepted theory of solid–solid transition from quartz to stishovite and might represent the more general mechanism occurring in nature for low shock pressure events.     

Knowledge-based systems as decision support tools in an ecosystem approach to fisheries: Comparing a fuzzy-logic and a rule-based approach

In an ecosystem approach to fisheries (EAF), management must draw on information of widely different types, and information addressing various scales. Knowledge-based systems assist in the decision-making process by summarising this information in a logical, transparent and reproducible way. Both rule-based Boolean and fuzzy-logic models have been used successfully as knowledge-based decision support tools. This study compares two such systems relevant to fisheries management in an EAF developed for the southern Benguela. The first is a rule-based system for the prediction of anchovy recruitment and the second is a fuzzy-logic tool to monitor implementation of an EAF in the sardine fishery. We construct a fuzzy-logic counterpart to the rule-based model, and a rule-based counterpart to the fuzzy-logic model, compare their results, and include feedback from potential users of these two decision support tools in our evaluation of the two approaches. With respect to the model objectives, no method clearly outperformed the other. The advantages of numerically processing continuous variables, and interpreting the final output, as in fuzzy-logic models, can be weighed up against the advantages of using a few, qualitative, easy-to-understand categories as in rule-based models. The natural language used in rule-based implementations is easily understood by, and communicated among, users of these systems. Users unfamiliar with fuzzy-set theory must “trust” the logic of the model. Graphical visualization of intermediate and end results is an important advantage of any system. Applying the two approaches in parallel improved our understanding of the model as well as of the underlying problems. Even for complex problems, small knowledge-based systems such as the ones explored here are worth developing and using. Their strengths lie in (i) synthesis of the problem in a logical and transparent framework, (ii) helping scientists to deliberate how to apply their science to transdisciplinary issues that are not purely scientific, and (iii) representing vehicles for delivering state-of-the-art science to those who need to use it. Possible applications of this approach for ecosystems of the Humboldt Current are discussed.     

Exploring pathways for sustainable water management in river deltas in a changing environment

Exploring adaptation pathways into an uncertain future can support decisionmaking in achieving sustainable water management in a changing environment. Our objective is to develop and test a method to identify such pathways by including dynamics from natural variability and the interaction between the water system and society. Present planning studies on long-term water management often use a few plausible futures for one or two projection years, ignoring the dynamic aspect of adaptation through the interaction between the water system and society. Our approach is to explore pathways using multiple realisations of transient scenarios with an Integrated Assessment Meta Model (IAMM). This paper presents the first application of the method using a hypothetical case study. The case study shows how to explore and evaluate adaptation pathways. With the pathways it is possible to identify opportunities, threats, timing and sequence of policy options, which can be used by policymakers to develop water management roadmaps into the future. By including the dynamics between the water system and society, the influence of uncertainties in both systems becomes clearer. The results show, among others, that climate variability rather than climate change appears to be important for taking decisions in water management.     

Revision and recalibration of existing shock classifications for quartzose rocks using low‐shock pressure (2.5–20 GPa) recovery experiments and mesoscale numerical modeling

A combination of shock recovery experiments and numerical modeling of shock deformation in the low‐shock pressure range from 2.5 to 20 GPa for two dry sandstone types of different porosity, a completely water‐saturated sandstone, and a well‐indurated quartzite provides new insights into strongly heterogeneous distribution of different shock features. (1) For nonporous quartzo‐feldspathic rocks, the traditional classification scheme (Stöffler 1984 ) is suitable with slight changes in pressure calibration. (2) For water‐saturated quartzose rocks, a cataclastic texture (microbreccia) seems to be typical for the shock pressure range up to 20 GPa. This microbreccia does not show formation of PDFs but diaplectic quartz glass/SiO₂ melt is formed at 20 GPa (~1 vol%). (3) For porous quartzose rocks, the following sequence of shock features is observed with progressive increase in shock pressure (1) crushing of pores, (2) intense fracturing of quartz grains, and (3) increasing formation of diaplectic quartz glass/SiO₂ melt replacing fracturing. The formation of diaplectic quartz glass/SiO₂ melt, together with SiO₂ high‐pressure phases, is a continuous process that strongly depends on porosity. This experimental observation is confirmed by our concomitant numerical modeling. Recalibration of the shock classification scheme results in a porosity versus shock pressure diagram illustrating distinct boundaries for the different shock stages.     

Heterogeneous accretion,composition and core–mantle differentiation of the Earth

A model of core formation is presented that involves the Earth accreting heterogeneously through a series of impacts with smaller differentiated bodies. Each collision results in the impactor's metallic core reacting with a magma ocean before merging with the Earth's proto-core. The bulk compositions of accreting planetesimals are represented by average solar system abundances of non-volatile elements (i.e. CI-chondritic), with 22% enhancement of refractory elements and oxygen contents that are defined mainly by the Fe metal/FeO silicate ratio. Based on an anhydrous bulk chemistry, the compositions of coexisting core-forming metallic liquid and peridotitic silicate liquid are calculated by mass balance using experimentally-determined metal/silicate partition coefficients for the elements Fe, Si, O, Ni, Co, W, Nb, V, Ta and Cr. Oxygen fugacity is fixed by the partitioning of Fe between metal and silicate and depends on temperature, pressure and the oxygen content of the starting composition. Model parameters are determined by fitting the calculated mantle composition to the primitive mantle composition using least squares minimization. Models that involve homogeneous accretion or single-stage core formation do not provide acceptable fits. In the most successful models, involving 24 impacting bodies, the initial 60–70% (by mass) of the Earth accretes from highly-reduced material with the final 30–40% of accreted mass being more oxidised, which is consistent with results of dynamical accretion simulations. In order to obtain satisfactory fits for Ni, Co and W, it is required that the larger (and later) impactor cores fail to equilibrate completely before merging with the Earth's proto-core, as proposed previously on the basis of Hf-W isotopic studies. Estimated equilibration conditions may be consistent with magma oceans extending to the core–mantle boundary, thus making core formation extremely efficient. The model enables the compositional evolution of the Earth's mantle and core to be predicted throughout the course of accretion. The results are consistent with the late accretion of the Earth's water inventory, possibly with a late veneer after core formation was complete. Finally, the core is predicted to contain ~ 5 wt.% Ni, ~ 8 wt.% Si, ~ 2 wt.% S and ~ 0.5 wt.% O.