Role of groundwater protection planning in groundwater governance: A case study from North India

In the present case study, impact of urbanization and industrial development on the shallow groundwater regime of Saharanpur town of Uttar Pradesh in India is examined with the aim of planning groundwater protection for better governance. The hazardous physicochemical and bacteriological parameters and heavy metals detected in the shallow aquifer include harmful pathogens like fecal coliforms, heavy metals like cadmium, chromium, nitrates and sulphates. An assessment of ground water vulnerability using the well known DRASTIC method has confirmed that the shallow groundwater in some central and southern localities of Saharanpur town fall in the medium risk zones. Further, using field data of 32 electrical resistivity soundings, the protective capacity of the unconfined aquifer is assessed in terms of a ‘total longitudinal conductance’ of the semi-pervious to impervious sediments overlying the unconfined aquifer. However, some areas aligned along a northwest-southeast and in the western parts of the town seem to have relatively higher protective capacity against infiltrating waste pollutants. A ground water protection planning map prepared by combining the DRASTIC map and the ‘potentially hazardous pollutants’ map has brought out the need to install eleven new groundwater quality monitoring wells in the town at locations near the line sources and point sources of pollution. This approach can be readily employed by the decision makers in framing sound guidelines for groundwater protection and governance.     

The Latnenskoe refractory clay deposit (Central Russia)

This paper reports the results of our recent studies and generalizes previously known data on the geology, mineralogy, geochemistry, and genesis of the Russia’s largest Latnenskoe refractory clay deposit. It is shown that conditions of its localization were defined by regional and local factors. The regional factors controlled the distribution of the clay raw material in the region, while the local factors were responsible for the genesis and composition of refractory clays of the Latnenskoe deposit. Our studies showed that the formation of refractory clays is not only related to terrigenous but also to authigenic processes of sedimentation. The terrigenous component of clays was formed by the erosion of kaolin weathering crusts of the Voronezh anteclise crystalline basement and Paleozoic sedimentary hydromica–kaolinite rocks. Authigenic processes were significantly contributed by organic matter, which determined the environmental pH and Eh parameters. It is established that the mineral matter of clays of the deposit is represented by three morphological modifications (crystalline, amorphous, and biomorphic), which were formed subsequently and (or) simultaneously and could be transformed into each other. Application of a complex of modern precision methods allowed us to reveal a previously unknown biomorphic modification of kaolinite, the major rock-forming mineral, as well as mixed-layer kaolinite-smectite in the clays. It is shown that the distribution of major and trace elements and the sulfur isotope composition in different technological types of clay depend mainly on the facies conditions of their formation. Technological properties of clay raw material are considered.     

Stratigraphy and correlation of Mesoproterozoic rocks associated with Mohar cauldron,Shivpuri district,Madhya Pradesh

A circular structure, termed as cauldron of volcanic origin, was located near Mohar village in Shivpuri district (M.P.) in the year 2000. Subsequently, the same structure was called as Dhala structure of impact origin. There may be debate over the origin and evolution of this circular structure, but it is characterized by a unique lithological set-up within the Bundelkhand craton. The circular structure is defined by annular disposition of igneous and sedimentary rocks. This includes a set of felsic volcanic rocks and associated breccias named as Mohar Formation, exposed in the outer rim of the circular structure. The inner part of the circular structure has sedimentary sequence, termed as Dhala Formation.The field relations indicate that the Mohar and Dhala foarmations are younger than Bundelkhand granitoid complex but older than Kaimur Group. This period in Indian stratigraphy corresponds to Semri Group which consists of Porcellanite Formation, the rocks of which have formed due to deposition of volcanic ash.The geochronological data and field relations between different litho-units indicate that the Mohar volcanism which generated large volume of volcanic ash was a possible source for the formation of Porcellanite Formation. The deposition of sedimentary sequence in main Vindhyan basin was continued, whereas the volcanic activity in Mohar area continued till H ≈ 1.0 Ga. Since, acid volcanic activity has been reported in different parts of the world at H ≈ 1.0 Ga., it is possible that the Mohar acid volcanic activity is not an isolated event; instead it may be a part of global volcanic activities around H ≈ 1.0 Ga.     

Heterogeneity of grain-size fractions of nanodiamonds from the Orgueil C1 meteorite

A model for the composition of meteoritic nanodiamonds is suggested based on analysis of the concentrations and isotopic compositions of C, N, and Xe in the nanodiamond-rich grain-size fractions, which were separated for the first time from the Orgueil CI chondrite. According to the model, meteoritic nanodiamond consists of two populations of grains (denoted C_HL and C_N). The size distributions of grains in populations in the C_HL and C_N populations are different: the C_HL population is finer grained than C_N. The grains of the C_HL population are characterized by a radial gradient in the carbon isotopic composition, and they contain implanted anomalous noble gases (HL component) and the heavy nitrogen isotope ¹⁵N. Following (Clayton et al., 1995), the probable astrophysical source of this population of nanodiamond grains is thought to be the mixing helium and hydrogen shells of a Type-II supernova, and the mechanism that produced these grains was the slow CVD process. The C_N population grains have homogeneous isotopic compositions of carbon (δ¹³C ≡–100‰) and nitrogen (δ¹⁵N ≡–400‰) and contain almost all nitrogen of the nanodiamond-rich fractions. This population of nanodiamond grains was likely formed by a fast unequilibrated process, when shock waves affected organic compounds or gas rich in C- and N-bearing compounds during the early evolution of the protosolar nebula. Calculations within the framework of the model show that the nanodiamond-rich fractions separated from the Orgueil meteorite have the C_N/C_HL ratios varying from 1 in the finest grained fraction to 10 in the coarse-grained one. At these proportions of the populations, weighted mean δ¹³C values of C_HL grains in the fractions lie within the range of 42 to 394‰, and the concentrations of ¹³²Xe-HL and ¹⁵N are (49–563) × 10^–8 cm³/gC and (1.1–6.2) × 10^–5 cm³/gC, respectively.     

Ninetyeast ridge: Magmatism and geodynamics

The study of magmatism and tectonic structure of the East Indian or Ninetyeast Ridge (NER) reveals the geochemical similarity of mantle sources for the NER and Kerguelen Plateau melts. Magmas related to the Kerguelen plume were derived from an enriched mantle source, whereas the NER tholeiitic basalts originated from a source contaminated by a depleted material. While, depleted basalt varieties were not found within the NER basalts. It was shown that magmatic rocks forming the NER were generated by high degrees (30%) of partial melting within the ancient Wharton spreading ridge due to the activity of the Kerguelen plume, which was located at this time in the vicinity of the ridge. The most significant impact of the plume on the NER structures was recorded at 70–50 Ma ago.     

The subsidence and thermal history of the Baikit anteclise sedimentary basin

The Riphean rocks of the Baikit anteclise have been examined using pyrolysis Rock–Eval 6 to evaluate the subsidence history and erosion level. The studied Riphean rocks have the МK₃–МK₄ catagenesis grade. Based on the catagenesis of organic matter we propose a model of maximum burial before the beginning of the accumulation of Vendian deposits. Estimated calculations of subsidence and erosion have shown that the assessed catagenesis grade could be reached at a depth of 7 km, while the erosion level was approximately 5–7 km.     

The Bashilsky swell: an Upper Pleistocene extrusion in the Verkhnechegemskaya caldera (Northern Caucasus)

This work describes a young extrusive massif in the uppermost reaches of the Chegem River (Bashilauzu-su River), which had been considered as a feeder of the great sequence of Upper Pliocene rhyolite ignimbrites of the Verkhnechegemskaya caldera. The Upper Pleistocene age of the stratum, extrusive origin of automagmatic breccias and fluidolites, as well as its difference from rhyolites of the caldera are proven. The Bashilsky swell, located in the Late Pleistocene glacial trough, is evidence of young volcanism in this area, which has not been previously proposed.     

The upper Bajocian of the Crimean Mountains: Paleogeography and sedimentation conditions from palynological data

Based on the spore-pollen data, the mineral composition of clay rocks, analyzed structures and facies, and a general paleogeographic analysis, the sedimentation conditions and landscapes of islands located during the Late Bajocian in the region of the present-day the Crimean Mountains have been reconstructed. It is shown that the sublatitudinally elongated insular land zone had a width of 30 km, the heights of the islands were no more than 1 km, with steep mudflow-affected northern slopes and with an extensive river system on the southern slopes.     

Predicting kimberlite diamond deposits in the north of the Siberian Platform on the basis of interpretation of satellite imagery

An essentially new method for the allocation of diamondiferous kimberlite pipes against surrounding rocks is proposed. The method is based on the interpretation of multispectral LANDSAT-7 ETM+ satellite images; it allows one to find the most promising areas within perspective sites revealed by other methods. It is demonstrated that application of GIS technologies for comprehensive use of geological, geophysical, and mineralogical data and the results of the interpretation of satellite images is efficient for predicting kimberlite diamond deposits in both studied areas and poorly explored territories.     

Types of engineering-geological structures of Russia

Engineering-geological (geotechnical) structures are distinguished based on a combination of regional and zonal geological factors. Classifications of engineering-geological structures of the Earth and Russia are presented. The main engineering-geological characteristics and spatial distribution patterns of continental subaerial, continental subaquatic, and transitional predominantly subaquatic and oceanic predominantly subaquatic engineering- geological mega- and macrostructures distinguished in Russia are described.