Implementation of an optimized Cassegrain system for radio telescopes

We present the antenna design for a radio interferometer, the Arcminute Microkelvin Imager, together with its beam pattern measurement. Our aim was to develop a low-cost system with high aperture efficiency and low ground spill across the frequency range 12–18 GHz. We use a modified Cassegrain system consisting of a commercially available paraboloidal primary mirror with a diameter of 3.7 m, and a shaped secondary mirror. The secondary mirror is oversized with respect to a ray optics design and has a surface that is bent towards the primary near its outer edge using a square term for the shaping. The antennas are simple to manufacture and therefore their cost is low. The design increased the antenna gain by approximately 10 per cent compared to a normal Cassegrain system while still maintaining low contamination from ground spill and using a simple design for the horn.     

Pipe–soil interaction for segmented buried pipelines subjected to dip faults

This paper describes an investigation of pipe–soil interaction equations suggested by currently used pipeline seismic design codes and the applicability of these equations to segmented pipelines. The results of computer‐aided analyses were compared to results obtained in full‐scale experiments on a segmented ductile iron pipeline 93 mm in diameter and 15 m in length. The pipeline was installed 600 mm below the ground surface in a sandy soil compacted to two different subgrade reaction values. The type of fault considered was a reverse fault with an intersection angle of 60° with the pipeline, and the fault movement was a total of 350 mm in three same steps in the fault trace direction. The findings of this study demonstrate the necessity of considering the nature of soil behavior in pipe–soil interaction equations and the effects of connection joints on the integrated response of pipelines to fault‐induced ground deformations. A new combination of equations constituting a direction‐wise selection from among the equations proposed by currently used guidelines is introduced as a new series to describe pipe–soil interaction for segmented pipelines and is verified using the results of full‐scale experiments. Copyright © 2014 John Wiley & Sons, Ltd.     

Comparison of community structures between particle-associated and free-living prokaryotes in tropical and subtropical Pacific Ocean surface waters

The subtropical and tropical regions of the Pacific Ocean are less productive than other oceanic regions. Although particle association should be an important strategy for heterotrophic prokaryotes to survive in such environments, we have little information on particle-associated (PA) prokaryotes in these regions. The specific aim of this study was to determine bacterial and archaeal community structures in the PA assemblage in comparison to the free-living (FL) assemblage in the North Pacific Subtropical Gyre, the South Pacific Subtropical Gyre, and an eastern equatorial region of the Pacific Ocean. Community profiles and phylogenetic identities were obtained by denaturing gradient gel electrophoresis, 454-pyrosequencing, and cloning followed by Sanger sequencing of 16Sr RNA gene amplicons. The distribution patterns of some abundant groups in three regions and two lifestyles (PA and FL) are shown in this study. Also, the PA community structures of bacteria differed from the FL ones and exhibited higher diversity than the FL ones, while the archaeal community structures did not show significant differences between PA and FL assemblages. We found that specific phylotypes of Gammaproteobacteria and Flavobacteria were abundant in PA bacterial assemblages, suggesting that they prefer to attach and consume particulate organic matter. In summary, the surface seawater PA assemblages represent very different bacterial and archaeal community structures between three different oceanic regions, each of which had distinct PA and FL community structures. These results imply that environmental factors determine microbial community structures.     

Performance evaluation of a ground-source heat pump system utilizing a flowing well and estimation of suitable areas for its installation in Aizu Basin,Japan

Development of a ground-source heat pump (GSHP) system with higher efficiency, and evaluation of its operating performance, is essential to expand the growth of GSHP systems in Japan. A closed-loop GSHP system was constructed utilizing a flowing (artesian) well as a ground heat exchanger (GHE). The system was demonstrated for space-heating and space-cooling of a room (area 126.7 m²) in an office building. The average coefficient of performance was found to be 4.5 for space-heating and 8.1 for space-cooling. The maximum heat exchange rate was 70.8 W/m for space-heating and 57.6 W/m for space-cooling. From these results, it was determined that a GSHP system with a flowing well as a GHE can result in higher performance. With this kind of highly efficient system, energy saving and cost reduction can be expected. In order to assess appropriate locations for the installation of similar kinds of GSHP systems in Aizu Basin, a suitability map showing the distribution of groundwater up-flowing areas was prepared based on the results of a regional-scale three-dimensional analytical model. Groundwater up-flowing areas are considered to be suitable because the flowing well can be constructed at these areas. Performance evaluation of the GSHP system utilizing the flowing well, in conjunction with the prepared suitability map for its installation, can assist in the promotion of GSHP systems in Japan.     

Timing of Himalayan ultrahigh-pressure metamorphism: sinking rate and subduction angle of the Indian continental crust beneath Asia

Coesite relics were discovered as inclusions in clinopyroxene in eclogite and as inclusions in zircon in felsic and pelitic gneisses from Higher Himalayan Crystalline rocks in the upper Kaghan Valley, north‐west Himalaya. The metamorphic peak conditions of the coesite‐bearing eclogites are estimated to be 27–32 kbar and 700–770 °C, using garnet–pyroxene–phengite geobarometry and garnet–pyroxene geothermometry, respectively. Cathodoluminescence (CL) and backscattered electron (BSE) imaging distinguished three different domains in zircon: inner detrital core, widely spaced euhedral oscillatory zones, and thin, broadly zoned outermost rims. Each zircon domain contains a characteristic suite of micrometre‐sized mineral inclusions which were identified by in situ laser Raman microspectroscopy. Core and mantle domains contain quartz, apatite, plagioclase, muscovite and rutile. In contrast, the rim domains contain coesite and minor muscovite. Quartz inclusions were identified in all coesite‐bearing zircon grains, but not coexisting with coesite in the same growth domain (rim domain). ²⁰⁶Pb/²³⁸U zircon ages reveal that the quartz‐bearing mantle domains and the coesite‐bearing rim were formed at c. 50 Ma and 46.2 ± 0.7 Ma, respectively. These facts demonstrate that the continental materials were buried to 100 km within 7–9 Myr after initiation of the India–Asia collision (palaeomagnetic data from the Indian oceanic floor supports an initial India‐Asia contact at 55–53 Ma). Combination of the sinking rate of 1.1–1.4 cm year^?1 with Indian plate velocity of 4.5 cm year^?1 suggests that the Indian continent subducted to about 100 km depth at an average subduction angle of 14–19°.     

In situ X-ray observations of the decomposition of brucite and the graphite–diamond conversion in aqueous fluid at high pressure and temperature

 An experimental technique to make real-time observations at high pressure and temperature of the diamond-forming process in candidate material of mantle fluids as a catalyst has been established for the first time. In situ X-ray diffraction experiments using synchrotron radiation have been performed upon a mixture of brucite [Mg(OH)₂] and graphite as starting material. Brucite decomposes into periclase (MgO) and H₂O at 3.6 GPa and 1050 °C while no periclase is formed after the decomposition of brucite at 6.2 GPa and 1150 °C, indicating that the solubility of the MgO component in H₂O greatly increases with increasing pressure. The conversion of graphite to diamond in aqueous fluid has been observed at 7.7 GPa and 1835 °C. Time-dependent X-ray diffraction profiles for this transformation have been successfully obtained. Received: 17 July 2001 / Accepted: 18 February 2002     

Southward extrusion of eclogite-bearing mafic–ultramafic bodies in the Sanbagawa belt, central Shikoku, Japan

Several mafic rock masses, which have experienced eclogite facies metamorphism, are distributed in flat-lying non-eclogitic schists in an intermediate structural level (thermal core) of the Sanbagawa belt. The largest, Iratsu mass, and an associated peridotite, the Higashi-Akaishi mass, extend E–W for about 8 km, and N–S for about 3 km, and are surrounded by pelitic, basic and quartz schists. The Iratsu mass consists of metabasites of gabbroic and basaltic origin, with intercalations of ultramafic rocks, felsic gneiss, quartz schist and metacarbonate. The Iratsu mass can be divided into two layers along a WNW-trending metacarbonate layer. The Higashi-Akaishi mass consists of peridotite with intercalations of garnet clinopyroxenite. It is situated beneath the western half of the Iratsu mass, and their mutual boundary dips gently or steeply to the N or NE. These masses underwent eclogite, and subsequent epidote-amphibolite facies metamorphism as has been reported elsewhere. The Iratsu–Higashi-Akaishi masses and the surrounding rocks underwent ductile deformation under epidote-amphibolite facies (or lower P–T) metamorphic conditions. Their foliation generally trends WNW and dips moderately to the NNE, and the mineral lineation mostly plunges to the N and NE. In non-eclogitic schists surrounding the Iratsu–Higashi-Akaishi masses, the foliation generally trends WNW and dips gently or steeply to the N or S and the mineral lineation mostly plunges to the NW, N and NE. Kinematic analysis of deformation structures in outcrops and oriented samples has been performed to determine shear senses. Consistent top-to-the-north, normal fault displacements are observed in peridotite layers of the Higashi-Akaishi mass and eclogite-bearing epidote amphibolite layers of the Iratsu mass. Top-to-the-northeast or top-to-the-northwest displacements also occur in non-eclogitic pelitic–quartz schists on the northern side of the Iratsu mass. In the structural bottom of the Iratsu–Higashi-Akaishi masses and to the south, reverse fault (top-to-the-south) movements are recognized in serpentinized peridotite and non-eclogitic schists. These observations provide the following constraints on the kinematics of the rock masses: (1) northward normal displacement of Iratsu relative to Higashi-Akaishi, (2) northward normal displacement of non-eclogitic schists on the north of the Iratsu mass and (3) southward thrusting of the Iratsu–Higashi-Akaishi masses upon non-eclogitic schists in the south. The exhumation process of the Iratsu–Higashi-Akaishi masses can be explained by their southward extrusion.     

Preliminary study of rain effects on radar scattering from water surfaces

Preliminary wave-tank results indicate that radar scatter from water surfaces is severely affected by rain at low but not at high wind speeds. The effect is governed by both the rain rate and droplet size. A simple experiment to check this phenomenon is described.     

Integrated colors of globular clusters

Integrated colors of M3, M5, M13, and M92 are calculated from the luminosity function, the color-magnitude diagram, and the two-color diagram to compare them with observed ones. The results show good agreements for M3, M13, and M92 and the discrepancy for M5. Possible causes for this discrepancy are discussed.To study the way in which integrated colors are affected by changes in the distribution of stars in the color-magnitude diagram, we calculate the integrated colors by taking into account changes in the distribution of horizontal branch stars and in the ratio of the number of horizontal branch stars to that of red giant branch stars. The result shows that (B-V) color varies within the range of about 0.1 mag with changes in the distribution of horizontal branch stars, implying that the cluster with a well-developed blue horizontal branch has bluer intrinsic integrated (B-V) color than that with yellow one. This tendency is compared with observation.