Analysis of pressuremeter geometry effects in clay using critical state models

The conventional interpretation methods of pressuremeter testing effectively approximate pressuremeter membranes as infinitely long. As a result, the effects of the two‐dimensional geometry of pressuremeters are ignored, leading to an overestimation of soil shear strength by pressuremeter testing, as demonstrated in several previous studies. This paper presents results of a numerical study of two‐dimensional geometry effects on self‐boring pressuremeter tests in undrained clay. The results are obtained using critical state soil models with an effective stress formulation. This is in contrast to most (if not all) existing studies on pressuremeter geometry effects, which were based on perfectly plastic soil models (e.g. Yu (Cavity expansion theory and its application to the analysis of pressuremeters. DPhil Thesis, The University of Oxford, 1990), Yeung and Carter (Proc. 3rd Int. Symp. on Pressuremeters, 1990), and Houlsby and Carter (Géotechnique, 1993; 43 (4):567–576)). The present study suggests that the overestimation of soil strength due to the neglect of finite pressuremeter length is significantly affected by the soil model used in the calculations. It is found that for clays with a high overconsolidation ratio (OCR) the strength overestimation predicted using critical state soil models could be considerably smaller than that predicted using perfectly plastic soil models. The main conclusion of this numerical study is that care must be exercised before directly applying any numerically determined pressuremeter geometry correction factors in practice. Copyright © 2005 John Wiley & Sons, Ltd.     

Thallium diagenesis in lacustrine sediments

Dated sediment cores and porewaters from two Canadian Shield lakes, located 40 km from Québec City (L. Tantaré) and 25 km downwind from an important smelter in northwestern Québec (L. Vose), were analyzed for thallium and other geochemical variables. Atmospheric deposition is the only source of anthropogenic Tl to these lakes. The porewater Tl concentration profiles in L. Tantaré display a peak below the sediment-water interface that suggests post-depositional Tl remobilization and transport to the overlying water and deeper sediments; such a dissolved Tl peak occurs just above the sediment-water interface in L. Vose. Modeling the porewater Tl profiles with a diagenetic reaction-transport equation reveals a zone of dissolved Tl production lying above a zone of Tl consumption in L. Tantaré sediments. In contrast, in L. Vose, Tl diffuses across the sediment-water interface from the anoxic hypolimnion and is fixed to the surficial sediments. The localization of the consumption zones, the shape of the dissolved Tl, sulfide and iron profiles, as well as calculations of saturation states are all consistent with the removal of Tl from porewater by co-precipitation with and/or adsorption to Fe sulfides. The concentrations of Tl removed from or added to sediments after their deposition (i.e., diagenetic Tl) amount to up to 36% of measured sediment Tl concentrations. Comparison of the reconstructed historical Tl records with those of polycyclic aromatic hydrocarbons (PAHs) and of Pb originating from coal burning or from smelting activities indicate that coal combustion is the major source of atmospheric Tl to L. Tantaré and that an additional important Tl source to L. Vose is the nearby smelter.     

An analytical approach to ascertain saturation‐excess versus infiltration‐excess overland flow in urban and reference landscapes

Uncontrolled overland flow drives flooding, erosion, and contaminant transport, with the severity of these outcomes often amplified in urban areas. In pervious media such as urban soils, overland flow is initiated via either infiltration‐excess (where precipitation rate exceeds infiltration capacity) or saturation‐excess (when precipitation volume exceeds soil profile storage) mechanisms. These processes call for different management strategies, making it important for municipalities to discern between them. In this study, we derived a generalized one‐dimensional model that distinguishes between infiltration‐excess overland flow (IEOF) and saturation‐excess overland flow (SEOF) using Green–Ampt infiltration concepts. Next, we applied this model to estimate overland flow generation from pervious areas in 11 U.S. cities. We used rainfall forcing that represented low‐ and high‐intensity events and compared responses among measured urban versus predevelopment reference soil hydraulic properties. The derivation showed that the propensity for IEOF versus SEOF is related to the equivalence between two nondimensional ratios: (a) precipitation rate to depth‐weighted hydraulic conductivity and (b) depth of soil profile restrictive layer to soil capillary potential. Across all cities, reference soil profiles were associated with greater IEOF for the high‐intensity set of storms, and urbanized soil profiles tended towards production of SEOF during the lower intensity set of storms. Urban soils produced more cumulative overland flow as a fraction of cumulative precipitation than did reference soils, particularly under conditions associated with SEOF. These results will assist cities in identifying the type and extent of interventions needed to manage storm water produced from pervious areas.     

Early‐middle Holocene land snail shell stable isotope record from Grotta di Latronico 3 (southern Italy)

This paper compares stable isotope (δ¹⁸O and δ¹³C) records of early–middle Holocene land snail shells from the archaeological deposits of Grotta di Latronico 3 (LTR3; southern Italy) with modern shell isotopic data. No substantial interspecific variability was observed in shell δ¹⁸O (δ¹⁸Os) of modern specimens (Pomatias elegans, Cornu aspersum, Eobania vermiculata, Helix ligata and Marmorana fuscolabiata). In contrast, interspecific shell δ¹³C (δ¹³Cs) variability was significant, probably due to different feeding behaviour among species. The δ¹⁸Os values of living land snails suggest that species hibernate for a long period during colder months, so that the signal of ¹⁸O‐depleted winter rainfall in their δ¹⁸Os is lost. This suggests that δ¹⁸Os and δ¹³Cs values of Pomatias elegans from this archaeological succession provide valuable clues for seasonal (spring–autumn) climatic conditions during the early–middle Holocene. The δ¹⁸Os values of fossil specimens are significantly lower than in modern shells and in agreement with other palaeoclimatic records, suggesting a substantial increase of precipitation and/or persistent changes in air mass source trajectories over this region between ca. 8.8 cal ka BP and 6.2–6.7 ka ago. The δ¹³Cs trend suggests a transition from a slightly ¹³C‐enriched to a ¹³C‐depleted diet between early and middle Holocene compared to present conditions. We postulate that this δ¹³Cs trend might reflect changes in the C3 vegetation community, potentially combined with other environmental factors such as regional moisture increase and the progressive decrease of atmospheric CO₂ concentration. Copyright © 2010 John Wiley & Sons, Ltd.     

Population structure of two deep sea tubeworms,Lamellibrachia luymesi and Seepiophila jonesi,from the hydrocarbon seeps of the Gulf of Mexico

Vestimentiferan tubeworms are a group of large sessile marine polychaete annelids (family Siboglinidae) found in the regions of hydrothermal venting or seepage of the reduced chemical hydrogen sulfide. Hydrocarbon seeps on the Louisiana Slope of the Gulf of Mexico support large communities of the co-occurring vestimentiferan species Lamellibrachia luymesi and Seepiophila jonesi. These sessile species have the opportunity to disperse between the patchy sites of active seepage on the seafloor during a planktonic larval stage. However, it is unclear whether dispersal occurs at a local or global scale. Four (L. luymesi) and seven (S. jonesi) microsatellite loci were used to test for population substructure among ten hydrocarbon seep sites on the Louisiana Slope. Both species showed high levels of allelic diversity, averaging 18.5 (L. luymesi) and 22 (S. jonesi) alleles/locus, respectively, and high observed heterozygosity at all microsatellite loci (0.71–0.9 in L. luymesi, 0.27–0.84 in S. jonesi). The two species showed a significant deficiency in heterozygotes compared to that predicted under the Hardy–Weinberg equilibrium. L. luymesi showed a small but significant amount of population structure, with a positive correlation between genetic and geographic distance among the sample sites spanning 540 km. S. jonesi, in contrast, showed no evidence for isolation by distance, but did show a significant genetic difference between aggregations of different ages. These results suggest that these two species differ in how larvae are able to colonize new seep sites through space (L. luymesi) and though time (S. jonesi).     

Coastal Occupations in Tierra del Fuego,Southernmost South America: A Late Holocene Hunter‐Gatherer Context at Marazzi 2

This paper focuses on the late Holocene occupation of hunter‐gatherers at the Marazzi 2 site located on the northwestern steppe of Tierra del Fuego, Chile. Our aim is to understand stratigraphy, formation processes, and pedogenesis with respect to human occupation over the last 3000 years. Based on archaeological excavations on a fluvial terrace of the Torcido River, we integrate soil micromorphology, mineralogy, geochemistry, magnetic susceptibility, and geomorphology, as well as the micro‐ and macrofrequency distributions of archaeological material. A micro‐taphonomical perspective is also applied to anthropogenic components recorded in sedimentary thin sections. We discuss various events in the interplay between soil development and human occupation through time. Marazzi 2 was witness to aggradation and pedogenesis with an episode of surface stability coincident with a phase of more intense human occupation at about 860 BC. Taphonomic analysis suggests that there are multiple occupation events mixed together, probably by biomechanical processes, resulting in a palimpsest with poor temporal resolution.     

Assessment of textural variational pattern and electrical conduction of economic and accessible Quaternary hydrolithofacies via geoelectric and laboratory methods in SE Nigeria: A case study of select locations in Akwa Ibom State

Textural variational pattern of economic and accessible Quaternary aquifer repositories and its conductivity in the south-eastern Nigeria have been assessed through the integration of vertical electrical sounding and laboratory measurements. The results have shown the lithological attributes, pore-water and amount of residual clay minerals in the assumed clean sand; mechanism of charge fixation at the fluid - surface interface; intricate geometry of pores and pore channels; formation’s ability to transmit pore-water and cation exchange capacity.The connections of electrical and hydraulic properties and their distributions have been established. The average interface conductivity contributed by residual clay minerals in assumed clean sands of the aquifer repositories in the study area have been estimated as 30µS/m. Intrinsic average porosity and formation factor have been respectively deduced as 12% and 14.75. Comparing the simulated aquifer formation factor obtained from the observed porosity data with the observed aquifer formation factor, indicates the that study area has 0.5 ≤ a ≤ 0.8 pore geometry factor and 1.5 ≤ m ≤ 2.0 cementation factor as the best fitting values. The interrelations between aquifer parameters have been established through different plots and the aquifer have been empirically proved to be associated with residual clay minerals as the interface conductivity C_q is not equal to zero. The wide ranges of parameters estimated are an indication of variations in grain size. The estimated intrinsic average porosity, formation factor and the average BQ_v are viable in characterizing the aquifer flow dynamics and contaminant modelling in the associated aquifer sands For low pore geometry factors a (0.2) and low cementation factor m (0.5) the formation factor remains fairly constant. However, marked variability is noticed at higher a (1.0) and m (2.5). Despite the observed variability in formation factors at the indicated porosities, the spatial or geometrical spread of the formation factor remains unchanged in the aquifer units. The Tables for geoelectric and petrophysical parameters and the associated mathematical models generated in this study can be used for groundwater contaminant modelling and simulation of pore space parameters with reasonable accuracy.