Zenisu Ridge: mechanical model of formation

Seabeam, seismic and submersible surveys took place during the Kaiko Project and revealed significant compressive deformation at the northeastern end of the Philippine Sea plate, related to the recent collision of the Izu-Ogasawara Arc against Central Japan. Intraoceanic thrusting at the base of the Zenisu Ridge, a linear topographic high running a few tens of kilometers south of the Nankai Trough, is supported by tectonic, magnetic and gravimetric data. We investigate the formation of the Zenisu Ridge in terms of compressive mechanical failure of a thin elastic-perfectly plastic plate, subducting at a trench and subject to a regional compressive axial force. The rheological envelope concept is used throughout the numerical calculations. Based on a detailed study of flexure of the present-day bending far from the deformation zone, we evaluate the bending forces involved: the bulge is 120 to 150 m high and the compressive stress all along the Nankai Trough is about −100 MPa. In the Zenisu Ridge area, an additional compressive stress is superimposed due to the nearby collision at Izu-Peninsula. We compute the vertical distribution of the deviatoric stress before failure and find that the deviatoric stress is maximum at a depth of 20–25 km in the trench area, and again at the surface 60 to 100 km seaward, in the vicinity of the bulge. The development of a thrust joining these two maxima through the entire thickness of the lithosphere is discussed. The model predicts that the formation of the Zenisu Ridge did not occur before 4 Ma and is caused by progressive tectonic uplift due to the redistribution of bending stresses as the ridge approaches the Nankai Trough.     

Fluid venting along Japanese trenches: tectonic context and thermal modeling

Large benthic chemosynthetic communities have been observed at four main locations during the Kaiko submersible dives in the Japanese trenches. They appear to be associated with venting along fractures. The first site for our observation was along the Japan and Kuril trenches where the continental margin is eroded by the subducting plate and collapses into the trench. The benthic communities there seem to be related to tension gashes parallel to the subduction vector. The other communities were found on the toe of the Nankai accretionary prism, along the frontal thrust and tension gashes. The temperature anomaly associated with one of the communities is modeled to constrain the upward flow of interstitial water. As the anomaly has a small spatial extent and as the peak thermal gradient is high, the best fitting model is to be found in a vertical upward flow at a velocity of 100 m/yr in a cylindrical conduit leading out of an underlying shallow thrust.     

Magnetic anomalies in the Shikoku Basin: a new interpretation

Kaiko surveys over the Nankai Trough made available new magnetic and structural data for the northern Shikoku Basin. A survey of the oceanic lithosphere subducting below Southwest Japan along the central Nankai Trough revealed the existence of several north-south basement troughs. They are probably transform faults related to a north-south spreading system. We examine the possibility of a late phase of north-south spreading limited to the axial northernmost Shikoku Basin, active between 14 and 12 Ma. If this system was already active before that time, i.e. during the N55° opening of the southeastern basin, then a triple junction should be found between both areas.Based on these data and previous studies we present a new interpretation of magnetic anomalies over the whole basin. From early east-west rifting to late north-south spreading, opening of the Shikoku Basin proceeded through multiple episodes of spreading. The analysis of magnetic anomalies constrains the kinematic evolution of the basin through time and space. Two successive counter-clockwise rotations of the spreading direction are postulated, at anomaly 6 (19 Ma) and at anomaly 5B (14 Ma), involving segmentation and rotation of the spreading ridge.     

Kinematic evolution of the Tethys belt from the Atlantic ocean to the pamirs since the Triassic

We present an updated series of kinematic reconstructions of the major plates around the Tethys from the Atlantic Ocean to the Pamirs between the Early Jurassic and the Present. This set is used elsewhere as a basis for paleogeographic maps of the entire region. The problems related to the positions of the continents in the Lower Triassic are also discussed. No direct analyses of magnetic anomalies and fracture zones in the Atlantic have been made. Rather, all available poles and rotations have been tested in order to eliminate or minimize possible kinematic errors. The reconstructions are shown for nine key geological periods which correspond to well recognized magnetic anomalies, except for the Jurassic-Cretaceous boundary and the Cretaceous-Tertiary boundary which correspond to interpolated positions. Paleolatitudes have been drawn using the study of Westphal et al. (1986). An attempt has been made to take into account the displacements caused by formation of the continental margins and basins by stretching. The resulting relative vector of motions along the northern boundary of the Tethys shows a significant change 80 m.y. ago. Left-lateral motion with compression dominates before whereas right-lateral motion with compression dominates after. To the east, rates of motion vary by a factor of three with time and four maxima can be clearly related to tectonic events in the Late Jurassic, Late Cretaceous, Eocene and post Middle Miocene. To the west, north of Apulia, on the contrary, the motion rate has not changed significantly since the Early Cretaceous and is close to 1 cm/yr as an average. These rather complex adjustments in rates and directions of relative motion are produced in great part through a complex migration of the Africa-Eurasia pole of rotation and seem to be mostly governed by the tectonics of the Tethys plate boundary.     

Geological evolution of the tethys belt from the atlantic to the pamirs since the LIAS

We discuss nine palinspastic geological maps (Plates 1–9), at scale, which depict the evolution of the Tethys belt from the Pliensbachian (190 Ma) to the Tortonian (10 Ma). A Present structural map (Plate 10) is shown for comparison at the same scale with the same conventions. Our reconstructions are based on a kinematic synthesis (Savostin et al., 1986), a paleomagnetic synthesis (Westphal et al., 1986) and geological compilations and analyses concerning in particular the western domain (Ricou et al., 1986), the eastern passive margins (Kazmin et al., 1986a), the eastern active margins (Kazmin et al., 1986b), the Black Sea-Caspian Sea basins (Zonenshain and Le Pichon, 1986) and the ophiolites (Knipper et al., 1986).     

Microbiological and ecological responses to global environmental changes in polar regions (MERGE): An IPY core coordinating project

An integrated program, “Microbiological and ecological responses to global environmental changes in polar regions” (MERGE), was proposed in the International Polar Year (IPY) 2007–2008 and endorsed by the IPY committee as a coordinating proposal. MERGE hosts original proposals to the IPY and facilitates their funding. MERGE selected three key questions to produce scientific achievements. Prokaryotic and eukaryotic organisms in terrestrial, lacustrine, and supraglacial habitats were targeted according to diversity and biogeography; food webs and ecosystem evolution; and linkages between biological, chemical, and physical processes in the supraglacial biome.MERGE hosted 13 original and seven additional proposals, with two full proposals. It respected the priorities and achievements of the individual proposals and aimed to unify their significant results. Ideas and projects followed a bottom-up rather than a top-down approach. We intend to inform the MERGE community of the initial results and encourage ongoing collaboration. Scientists from non-polar regions have also participated and are encouraged to remain involved in MERGE.MERGE is formed by scientists from Argentina, Australia, Austria, Belgium, Brazil, Bulgaria, Canada, Egypt, Finland, France, Germany, Italy, Japan, Korea, Malaysia, New Zealand, Philippines, Poland, Russia, Spain, UK, Uruguay, USA, and Vietnam, and associates from Chile, Denmark, Netherlands, and Norway.     

Accurate estimators of power spectra in N-body simulations

A method to rapidly estimate the Fourier power spectrum of a point distribution is presented. This method relies on a Taylor expansion of the trigonometric functions. It yields the Fourier modes from a number of fast Fourier transforms (FFTs), which is controlled by the order N of the expansion and by the dimension D of the system. In three dimensions, for the practical value   N = 3  , the number of FFTs required is 20.
We apply the method to the measurement of the power spectrum of a periodic point distribution that is a local Poisson realization of an underlying stationary field. We derive an explicit analytic expression for the spectrum, which allows us to quantify – and correct for – the biases induced by discreteness and by the truncation of the Taylor expansion, and to bound the unknown effects of aliasing of the power spectrum. We show that these aliasing effects decrease rapidly with the order N . For   N = 3  , they are expected to be, respectively, smaller than  ∼10⁻⁴  and 0.02 at half the Nyquist frequency and at the Nyquist frequency of the grid used to perform the FFTs. The only remaining significant source of errors is reduced to the unavoidable cosmic/sample variance due to the finite size of the sample.
The analytical calculations are successfully checked against a cosmological N -body experiment. We also consider the initial conditions of this simulation, which correspond to a perturbed grid. This allows us to test a case where the local Poisson assumption is incorrect. Even in that extreme situation, the third-order Fourier–Taylor estimator behaves well, with aliasing effects restrained to at most the per cent level at half the Nyquist frequency.
We also show how to reach arbitrarily large dynamic range in Fourier space (i.e. high wavenumber), while keeping statistical errors in control, by appropriately 'folding' the particle distribution.     

The 3D skeleton: tracing the filamentary structure of the Universe

The skeleton formalism, which aims at extracting and quantifying the filamentary structure of our Universe, is generalized to 3D density fields. A numerical method for computing a local approximation of the skeleton is presented and validated here on Gaussian random fields. It involves solving equation     , where  ∇ρ  and     are the gradient and Hessian matrix of the field. This method traces well the filamentary structure in 3D fields such as those produced by numerical simulations of the dark matter distribution on large scales, and is insensitive to monotonic biasing.
Two of its characteristics, namely its length and differential length, are analysed for Gaussian random fields. Its differential length per unit normalized density contrast scales like the probability distribution function of the underlying density contrast times the total length times a quadratic Edgeworth correction involving the square of the spectral parameter. The total length-scales like the inverse square smoothing length, with a scaling factor given by  0.21 (5.28 + n )  where n is the power index of the underlying field. This dependency implies that the total length can be used to constrain the shape of the underlying power spectrum, hence the cosmology.
Possible applications of the skeleton to galaxy formation and cosmology are discussed. As an illustration, the orientation of the spin of dark haloes and the orientation of the flow near the skeleton is computed for cosmological dark matter simulations. The flow is laminar along the filaments, while spins of dark haloes within 500 kpc of the skeleton are preferentially orthogonal to the direction of the flow at a level of 25 per cent.