Cosmic ray exposure and pre‐atmospheric size of the Gebel Kamil iron meteorite

Cosmogenic He, Ne, and Ar as well as the radionuclides ¹⁰Be, ²⁶Al, ³⁶Cl, ⁴¹Ca, ⁵³Mn, and ⁶⁰Fe have been determined on samples from the Gebel Kamil ungrouped Ni‐rich iron meteorite by noble gas mass spectrometry and accelerator mass spectrometry (AMS), respectively. The meteorite is associated with the Kamil crater in southern Egypt, which is about 45 m in diameter. Samples originate from an individual large fragment (“Individual”) as well as from shrapnel. Concentrations of all cosmogenic nuclides—stable and radioactive—are lower by a factor 3–4 in the shrapnel samples than in the Individual. Assuming negligible ³⁶Cl decay during terrestrial residence (indicated by the young crater age <5000 years; Folco et al. 2011 ), data are consistent with a simple exposure history and a ³⁶Cl‐³⁶Ar cosmic ray exposure age (CRE) of approximately (366 ± 18) Ma (systematic errors not included). Both noble gases and radionuclides point to a pre‐atmospheric radius >85 cm, i.e., a pre‐atmospheric mass >20 tons, with a preferred radius of 115–120 cm (50–60 tons). The analyzed samples came from a depth of approximately 20 cm (Individual) and approximately 50–80 cm (shrapnel). The size of the Gebel Kamil meteoroid determined in this work is close to estimates based on impact cratering models combined with expectations for ablation during passage through the atmosphere (Folco et al. 2010 , 2011 ).     

The role of eddies in solute transport and recovery in rock fractures: Implication for groundwater remediation

A better understanding of solute transport and retention mechanism in rock fractures has been challenging due to difficulty in their direct observations in microscale rough‐walled fractures. Six representative troughs in a rough‐walled fracture were selected for microscale observations of eddy formation with increasing flow velocity and its effect on spatiotemporal changes of solute concentration. This experimental study was enabled by a microscale visualization technique of micro particle image velocimetry. With increasing flow velocity (Re ≤ 2.86), no eddies were generated, and solutes along the main streamlines transported rapidly, whereas those near the wall moved slowly. A larger amount of solutes remained trapped at all troughs at Re = 2.86 than Re < 1. For Re = 8.57, weak eddies started to be developed at the troughs on the lee side, which little contributed to overall solute flushing in the fracture. Accordingly, a large of amount of water was needed for solute flushing. The flow condition of 1 < Re < 10, before a full development of eddies, was least favourable in terms of time and amount of remediation fluid required to reach a target concentration. After large eddies were fully developed at troughs on the lee side for Re = 17.13, solutes were substantially reduced by eddies with less amount of water. Fully developed eddies were found to enhance solute transport and recovery, as opposed to a general consensus that eddies trap and delay solutes. Direct inflow into troughs on the stoss side also made a great contribution to solute flushing out of the troughs. This study indicates that fully developed eddies or strong inflows at troughs are highly possible to form for Re > 10 and this flow range could be favourable for efficient remediation.     

Fluid injection monitoring using electrical resistivity tomography — five years of injection at Ketzin,Germany

Between the years 2008 and 2013, approximately 67 kilotons of CO₂ have been injected at the Ketzin site, Germany. As part of the geophysical monitoring programme, time‐lapse electrical resistivity tomography has been applied using crosshole and surface‐downhole measurements of electrical resistivity tomography. The data collection of electrical resistivity tomography is partly based on electrodes that are permanently installed in three wells at the site (one injection well and two observation wells). Both types of ERT measurements consistently show the build‐up of a CO₂‐related resistivity signature near the injection point. Based on the imaged resistivity changes and a petrophysical model, CO₂ saturation levels are estimated. These CO₂ saturations are interpreted in conjunction with CO₂ saturations inferred from neutron‐gamma loggings. Apart from the CO₂–brine substitution response in the observed resistivity changes, significant imprints from the dynamic behaviour of the CO₂ in the reservoir are observed.     

An Intercomparison of Large-Eddy Simulations of the Stable Boundary Layer

Results are presented from the first intercomparison of large-eddy simulation (LES) models for the stable boundary layer (SBL), as part of the Global Energy and Water Cycle Experiment Atmospheric Boundary Layer Study initiative. A moderately stable case is used, based on Arctic observations. All models produce successful simulations, in as much as they generate resolved turbulence and reflect many of the results from local scaling theory and observations. Simulations performed at 1-m and 2-m resolution show only small changes in the mean profiles compared to coarser resolutions. Also, sensitivity to subgrid models for individual models highlights their importance in SBL simulation at moderate resolution (6.25 m). Stability functions are derived from the LES using typical mixing lengths used in numerical weather prediction (NWP) and climate models. The functions have smaller values than those used in NWP. There is also support for the use of K-profile similarity in parametrizations. Thus, the results provide improved understanding and motivate future developments of the parametrization of the SBL.     

Exploring large wood retention and deposition in contrasting river morphologies linking numerical modelling and field observations

Large wood tends to be deposited in specific geomorphic units within rivers. Nevertheless, predicting the spatial distribution of wood deposits once wood enters a river is still difficult because of the inherent complexity of its dynamics. In addition, the lack of long‐term observations or monitored sites has usually resulted in a rather incomplete understanding of the main factors controlling wood deposition under natural conditions. In this study, the deposition of large wood was investigated in the Czarny Dunajec River, Polish Carpathians, by linking numerical modelling and field observations so as to identify the main factors influencing wood retention in rivers. Results show that wood retention capacity is higher in unmanaged multi‐thread channels than in channelized, single‐thread reaches. We also identify preferential sites for wood deposition based on the probability of deposition under different flood scenarios, and observe different deposition patterns depending on the geomorphic configuration of the study reach. In addition, results indicate that wood is not always deposited in the geomorphic units with the highest roughness, except for low‐magnitude floods. We conclude that wood deposition is controlled by flood magnitude and the elevation of flooded surfaces in relation to the low‐flow water surface. In that sense, the elevation at which wood is deposited in rivers will differ between floods of different magnitude. Therefore, together with the morphology, flood magnitude represents the most significant control on wood deposition in mountain rivers wider than the height of riparian trees. Copyright © 2015 John Wiley & Sons, Ltd.     

Implications of trace element composition of syntaxial quartz cements for the geochemical conditions during quartz precipitation in sandstones

A petrographic investigation revealed polyphase quartz cementation in the Finefrau Sandstone (Upper Carboniferous, Western Germany) and the Solling Sandstone (Lower Triassic, Central Germany). Three different cements could be distinguished in each sandstone based on their cathodoluminescence and trace element composition. The first quartz generation is suggested to have been formed during eogenesis due to dissolution and replacement of feldspar. The mesogenetic paragenesis comprises two generations of quartz and illite, which are accompanied by albite in the Solling Sandstone. Sharp luminescence zoning in quartz overgrowths points to distinct episodes of cementation in both sandstones. Significant amounts of Al, Li and H and traces of Ge and B have been detected in the quartz overgrowths. The Al‐content of the quartz cements in the Finefrau Sandstones exceeds that in the quartz cements in the Solling Sandstone by a factor of five. It is suggested that this compositional variation reflects the conditions in the pore‐water, such as temperature and pH. The Al‐concentration is generally correlated to the Li‐content with the exception of the latest quartz generation in the Finefrau Sandstones which is also most enriched in trace elements. The ratio of Li/Al varies between 0·11 and 0·25 in the two sandstones. The Li/H‐ratio, which ranges from 0·12 to 0·3, is controlled by the activity ratio of Li and H in the pore fluid. Clay minerals are the most important source for Li and high salinities favour the mobilization of Li during diagenesis. Thus, a relatively low salinity and low pH are responsible for the low Li/H‐ratio in the Finefrau Sandstone, while high salinity and neutral to alkaline pH results in a high Li/H‐ratio for the Solling Sandstone. The Ge‐contents are generally near the average of detrital quartz and indicate that pressure dissolution is a major source for quartz cementation. Different chemical compositions of distinct quartz generations indicate changes in the physico‐chemical conditions and point to mobilization of silica from different sources (for example, pressure solution and clay mineral transformations).     

Analysis of nonstationarity in low flow in the Loess Plateau of China

An approach for nonstationary low‐flow frequency analysis is developed and demonstrated on a dataset from the rivers on the Loess Plateau of China. Nonstationary low‐flow frequency analysis has drawn significant attention in recent years by establishing relationships between low‐flow series and explanatory variables series, but few studies have tested whether the time‐varying moments of low flow can be fully described by the time‐varying moments of the explanatory variables. In this research, the low‐flow distributions are analytically derived from the 2 basic explanatory variables—the recession duration and the recession coefficient—with the assumption that the recession duration and recession coefficient variables follow exponential and gamma distributions, respectively; the derived low‐flow distributions are applied to test whether the time‐varying moments of explanatory variables can explain the nonstationarities found in the low‐flow variable. The effects of ecosystem construction measures, that is, check dam, terrace, forest, and grassland, on the recession duration and recession coefficient are further discussed. Daily flow series from 11 hydrological stations from the Loess Plateau are used and processed with a moving average technique. Low‐flow data are extracted following the pit under threshold approach. Six of the 11 low‐flow series show significant nonstationarities at the 5% significance level, and the trend curves of the moments of low flow are in close agreement with the curves estimated from the derived distribution with time‐dependent moments of the recession duration and time‐constant moments of the recession coefficient. It is indicated that the nonstationarity in the low‐flow distribution results from the nonstationarity in the recession duration in all 6 cases, and the increase in the recession duration is resulted from large‐scale ecosystem constructions rather than climate change. The large‐scale ecosystem constructions are found to have more influence on the decrease in streamflow than on the increase in watershed storage, thus resulting in the reduction of low flow. A high return period for the initial fixed design value decreases dramatically with an increasing recession duration.     

Paleogene evolution and demise of the proto‐Paratethys Sea in Central Asia (Tarim and Tajik basins): Role of intensified tectonic activity at ca. 41 Ma

The proto‐Paratethys Sea covered a vast area extending from the Mediterranean Tethys to the Tarim Basin in western China during Cretaceous and early Paleogene. Climate modelling and proxy studies suggest that Asian aridification has been governed by westerly moisture modulated by fluctuations of the proto‐Paratethys Sea. Transgressive and regressive episodes of the proto‐Paratethys Sea have been previously recognized but their timing, extent and depositional environments remain poorly constrained. This hampers understanding of their driving mechanisms (tectonic and/or eustatic) and their contribution to Asian aridification. Here, we present a new chronostratigraphic framework based on biostratigraphy and magnetostratigraphy as well as a detailed palaeoenvironmental analysis for the Paleogene proto‐Paratethys Sea incursions in the Tajik and Tarim basins. This enables us to identify the major drivers of marine fluctuations and their potential consequences on Asian aridification. A major regional restriction event, marked by the exceptionally thick (≤ 400 m) shelf evaporites is assigned a Danian‐Selandian age (ca. 63–59 Ma) in the Aertashi Formation. This is followed by the largest recorded proto‐Paratethys Sea incursion with a transgression estimated as early Thanetian (ca. 59–57 Ma) and a regression within the Ypresian (ca. 53–52 Ma), both within the Qimugen Formation. The transgression of the next incursion in the Kalatar and Wulagen formations is now constrained as early Lutetian (ca. 47–46 Ma), whereas its regression in the Bashibulake Formation is constrained as late Lutetian (ca. 41 Ma) and is associated with a drastic increase in both tectonic subsidence and basin infilling. The age of the final and least pronounced sea incursion restricted to the westernmost margin of the Tarim Basin is assigned as Bartonian–Priabonian (ca. 39.7–36.7 Ma). We interpret the long‐term westward retreat of the proto‐Paratethys Sea starting at ca. 41 Ma to be associated with far‐field tectonic effects of the Indo‐Asia collision and Pamir/Tibetan plateau uplift. Short‐term eustatic sea level transgressions are superimposed on this long‐term regression and seem coeval with the transgression events in the other northern Peri‐Tethyan sedimentary provinces for the 1st and 2nd sea incursions. However, the 3rd sea incursion is interpreted as related to tectonism. The transgressive and regressive intervals of the proto‐Paratethys Sea correlate well with the reported humid and arid phases, respectively in the Qaidam and Xining basins, thus demonstrating the role of the proto‐Paratethys Sea as an important moisture source for the Asian interior and its regression as a contributor to Asian aridification.     

Normal fault growth influenced by basement fabrics: The importance of preferential nucleation from pre‐existing structures

Reactivation of pre‐existing intra‐basement structures can influence the evolution of rift basins, yet the detailed kinematic relationship between these structures and overlying rift‐related faults remains poorly understood. Understanding the kinematic as well as geometric relationship between intra‐basement structures and rift‐related fault networks is important, with the extension direction in many rifted provinces typically thought to lie normal to fault strike. We here investigate this problem using a borehole‐constrained, 3D seismic reflection dataset from the Taranaki Basin, offshore New Zealand. Excellent imaging of intra‐basement structures and a relatively weakly deformed, stratigraphically simple sedimentary cover allow us to: (a) identify a range of interaction styles between intra‐basement structures and overlying, Plio‐Pleistocene rift‐related normal faults; and (b) examine the cover fault kinematics associated with each interaction style. Some of the normal faults parallel and are physically connected to intra‐basement reflections, which are interpreted as mylonitic reverse faults formed during Mesozoic subduction and basement terrane accretion. These geometric relationships indicate pre‐existing intra‐basement structures locally controlled the position and attitude of Plio‐Pleistocene rift‐related normal faults. However, through detailed 3D kinematic analysis of selected normal faults, we show that: (a) normal faults only nucleated above intra‐basement structures that experienced late Miocene compressional reactivation, (b) despite playing an important role during subsequent rifting, intra‐basement structures have not been significantly extensionally reactivated, and (c) preferential nucleation and propagation of normal faults within late Miocene reverse faults and folds appears to be the key genetic relationship between contractionally reactivated intra‐basement structures and rift‐related normal faults. Our analysis shows that km‐scale, intra‐basement structures can control the nucleation and development of newly formed, rift‐related normal faults, most likely due to a local perturbation of the regional stress field. Because of this, simply inverting fault strike for causal extension direction may be incorrect, especially in provinces where pre‐existing, intra‐basement structures occur. We also show that a detailed kinematic analysis is key to deciphering the temporal as well as simply the spatial or geometric relationship between structures developed at multiple structural levels.