SBAS orbit and satellite clock corrections for precise point positioning

The quality of real-time GPS positions based on the method of precise point positioning (PPP) heavily depends on the availability and accuracy of GPS satellite orbits and satellite clock corrections. Satellite-based augmentation systems (SBAS) provide such corrections but they are actually intended to be used for wide area differential GPS with positioning results on the 1-m accuracy level. Nevertheless, carrier phase-based PPP is able to achieve much more accurate results with the same correction values. We applied SBAS corrections for dual-frequency PPP and compared the results with PPP obtained using other real-time correction data streams, for example, the GPS broadcast message and precise corrections from the French Centre National d’Etudes Spatiales and the German Deutsches Zentrum für Luft- und Raumfahrt. Among the three existing SBAS, the best results were achieved for the North American wide area augmentation system (WAAS): horizontal and vertical position accuracies were considerably smaller than 10 cm for static 24-h observation data sets and smaller than 30 cm for epoch-by-epoch solutions with 2 h of continuous observations. The European geostationary navigation overlay service and the Japanese multi-functional satellite augmentation system yield positioning results with biases of several tens of centimeters and variations larger by factors of 2–4 as compared to WAAS.     

Trimlines as evidence for palaeo-tsunamis

As seen in many of the satellite images from the tsunami in the Indian Ocean which struck in 2004, there is a distinctive limit between an area with sand coverage, vegetation destruction, and soil erosion on the one hand, and the unaffected natural vegetation on the other. This distinction provides a good landmark to map the inundation width, delimited on the landward side by a trimline. In this study, older trimlines, dating back about 300?years, from tsunamis that occurred throughout the world were documented. We discuss the origin and chronology of trimline modification and extinction, both of which depend on local topography, rock type, and climate.     

Crater morphology in sandstone targets: The MEMIN impact parameter study

Abstract– Hypervelocity (2.5–7.8 km s^?1) impact experiments into sandstone were carried out to investigate the influence of projectile velocity and mass, target pore space saturation, target‐projectile density contrast, and target layer orientation on crater size and shape. Crater size increases with increasing projectile velocity and mass as well as with increasing target pore space saturation. Craters in water‐saturated porous targets are generally shallower and larger in volume and in diameter than craters from equivalent impacts into dry porous sandstone. Morphometric analyses of the resultant craters, 5–40 cm in diameter, reveal features that are characteristic of all of our experimental craters regardless of impact conditions (I) a large central depression within a fragile, light‐colored central part, and (II) an outer spallation zone with areas of incipient spallation. Two different mechanical processes, grain fragmentation and intergranular tensile fracturing, are recorded within these crater morphologies. Zone (I) approximates the shape of the transient crater formed by material compression, displacement, comminution, and excavation flow, whereas (II) is the result of intergranular tensile fracturing and spallation. The transient crater dimensions are reconstructed by fitting quadric parabolas to crater profiles from digital elevation models. The dimensions of this transient and of the final crater show the same trends: both increase in volume with increasing impact energy, and with increasing water saturation of the target pore space. The relative size of the transient crater (in percent of the final crater volume) decreases with increasing projectile mass and velocity, signifying a greater contribution of spallation on the final crater size when projectile mass and velocity are increased.     

Darss Sill as a biological border in the fossil record of the Baltic Sea: evidence from diatoms

Biostratigraphical and palaeoecological analyses of cores along a transect from Femer Belt to the Arkona Basin reveal that North Sea waters began to enter the western Baltic Sea between 8600 and 8400 calibrated years BP. Studies of diatoms indicate that Mecklenburg Bay was characterised by slightly brackish-water conditions between 8400 and 8000 cal. years BP. At around 8000 cal. years BP increasing salinity is indicated by a strong dominance of the diatoms Paralia sulcata and Dimeregramma minor. Some centuries later another diatom assemblage appeared and became dominant in Mecklenburg Bay. This assemblage includes Hyalinella lateripunctata and Pravifusus hyalinus species typical of shallow water areas along the Atlantic coast today. At this time the first marine molluscs made their appearance. The oldest shell of a marine mollusc found in our material is dated to 7600 cal. years BP. The associated assemblage that includes adult specimens of the gastropod Aporrhais pespelicani indicates higher salinities than today.During the Littorina Sea stage a marine diatom flora with P. sulcata, Catenula adhaerens and D. minor crossed the Darss Sill and became widely distributed in the Arkona Basin, Pomeranian Bay and the Baltic Sea proper. In contrast, taxa indicative of the Hyalinella lateripunctata/P. hyalinus assemblage are only found west of the Darss Sill in Femer Belt and Mecklenburg Bay. Apparently, the Darss Sill threshold has been acting as an important salinity border from around 7800 cal. years BP until today.     

Climatic and limnological changes at Lake Karakul (Tajikistan) during the last ~29 cal ka

We present results of analyses on a sediment core from Lake Karakul, located in the eastern Pamir Mountains, Tajikistan. The core spans the last ~29 cal ka. We investigated and assessed processes internal and external to the lake to infer changes in past moisture availability. Among the variables used to infer lake-external processes, high values of grain-size end-member (EM) 3 (wide grain-size distribution that reflects fluvial input) and high Sr/Rb and Zr/Rb ratios (coinciding with coarse grain sizes), are indicative of moister conditions. High values in EM1, EM2 (peaks of small grain sizes that reflect long-distance dust transport or fine, glacially derived clastic input) and TiO₂ (terrigenous input) are thought to reflect greater influence of dry air masses, most likely of Westerly origin. High input of dust from distant sources, beginning before the Last Glacial Maximum (LGM) and continuing to the late glacial, reflects the influence of dry Westerlies, whereas peaks in fluvial input suggest increased moisture availability. The early to early-middle Holocene is characterised by coarse mean grain sizes, indicating constant, high fluvial input and moister conditions in the region. A steady increase in terrigenous dust and a decrease in fluvial input from 6.6 cal ka BP onwards points to the Westerlies as the predominant atmospheric circulation through to present, and marks a return to drier and even arid conditions in the area. Proxies for productivity (TOC, TOC/TN, TOC _Br ), redox potential (Fe/Mn) and changes in the endogenic carbonate precipitation (TIC, δ¹⁸O _Carb ) indicate changes within the lake. Low productivity characterised the lake from the late Pleistocene until 6.6 cal ka BP, and increased rapidly afterwards. Lake level remained low until the LGM, but water depth increased to a maximum during the late glacial and remained high into the early Holocene. Subsequently, the water level decreased to its present stage. Today the lake system is mainly climatically controlled, but the depositional regime is also driven by internal limnogeological processes.     

Metamorphic equilibria in the siliceous dolomite system: 6 kbar experimental data and geologic implications

Hydrothermal experiments with H₂O-CO₂ fluids at P_fluid = 6 kbar yielded the following quilibrium conditions for reactions important in metamorphosed siliceous dolomites (T = °C; X = X_co2): (3) dolomite + 2 quartz = diopside + 2 CO₂T = 620 ± 8X = 0.73 ± 0.03 (5) 5 dolomite + 8 quartz + H₂O = tremolite + 3 calcite + 7 CO₂T = 600 ± 5 550 ±5 540±5 500±5X = 0.66 ± 0.03 0.21 ± 0.03 0.21 ± 0.04 0.06 ± 0.02 (7) 3 dolomite + 4 quartz + H₂O = talc + 3 calcite + 3 CO₂T = 550±5 500±5 450 ±5X = 0.25 ± 0.05 0.07 ± 0.02 0.03 ± 0.02 (8) 2 dolomite + talc + 4 quartz = tremolite + 4 CO₂T = 550 ± 5 540 ±5 500 ± 5X = 0.22 ± 0.03 0.21 ± 0.02 0.06 ± 0.02 A thermodynamically self-consistent 6 kbar T-X_CO2, topology results by extrapolating equilibria from experimental brackets using a modified Redlich-Kwong equation for activities in H₂O-CO₂ mixtures. This topology restricts the assemblage talc + calcite to a narrow stability band in T-X_CO2 space at X_CO2 < 0.55 and T < 590°C. Accordingly, the occurrence of talc + calcite in pure siliceous dolomites metamorphosed at P_fluid = 6 kbar implies correspondingly water-rich fluids.     

Late Quaternary barrier and fringing reef development of Bora Bora (Society Islands,south Pacific): First subsurface data from the Darwin‐type barrier‐reef system

The universally known subsidence theory of Darwin, based on Bora Bora as a model, was developed without information from the subsurface. To evaluate the influence of environmental factors on reef development, two traverses with three cores, each on the barrier and the fringing reefs of Bora Bora, were drilled and 34 uranium‐series dates obtained and subsequently analysed. Sea‐level rise and, to a lesser degree, subsidence were crucial for Holocene reef development in that they have created accommodation space and controlled reef architecture. Antecedent topography played a role as well, because the Holocene barrier reef is located on a Pleistocene barrier reef forming a topographic high. The pedestal of the fringing reef was Pleistocene soil and basalt. Barrier and fringing reefs developed contemporaneously during the Holocene. The occurrence of five coralgal assemblages indicates an upcore increase in wave energy. Age–depth plots suggest that barrier and fringing reefs have prograded during the Holocene. The Holocene fringing reef is up to 20 m thick and comprises coralgal and microbial reef sections and abundant unconsolidated sediment. Fringing reef growth started 8780 ± 50 yr bp ; accretion rates average 5·65 m kyr^?1. The barrier reef consists of >30 m thick Holocene coralgal and microbial successions. Holocene barrier‐reef growth began 10 030 ± 50 yr bp and accretion rates average 6·15 m kyr^?1. The underlying Pleistocene reef formed 116 900 ± 1100 yr bp , i.e. during marine isotope stage 5e. Based on Pleistocene age, depth and coralgal palaeobathymetry, the subsidence rate of Bora Bora was estimated to be 0·05 to 0·14 m kyr^?1. In addition to subsidence, reef development on shorter timescales like in the late Pleistocene and Holocene has been driven by glacioeustatic sea‐level changes causing alternations of periods of flooding and subaerial exposure. Comparisons with other oceanic barrier‐reef systems in Tahiti and Mayotte exhibit more differences than similarities.     

Episodic mineralization of hydrothermal illite in the Soultz-sous-Forêts granite (Upper Rhine Graben, France)

Episodic and localized illite mineralization is documented in the hydrothermally altered Soultz-sous-Forêts granite (Upper Rhine Graben, France). Separated grain-size fractions of altered granite and argillite vein samples contain mixtures of 2M₁ and 1M trans-vacant illite varieties. The platy pseudohexagonal 2M₁ illite phases dominate the vein fillings, whereas the 1M illite occurs largely as a fibrous pore-filling variety, which is particularly abundant in the granite matrix. Multiple phases of fluid injections into the granite body have resulted in different illite assemblages, each sample containing a mixture of polytype generations formed during different crystal growth events. On the basis of mineralogical and K–Ar isotopic constraints, the ages of these vein-mineralizing events are determined by plotting the K–Ar values of the various grain-size fractions against polytype abundance and the fitted volume-weighted crystallite thickness distributions. The results suggest a Permian age for the formation of the studied argillite veins, characterized by successive injections of hydrothermal fluids. Secondary episodes of illite crystallization occurred during Jurassic and Cretaceous (or even younger times) in both the veins and the granite matrix. There are indications that the polytype structure and composition of illite were strongly influenced by variations in fluid chemistry and the degree of fluid–rock interaction as the granite was progressively sealed during post-Variscan, episodic hydrothermal activity.     

The zircon evidence of temporally changing sediment transport—the NW Gondwana margin during Cambrian to Devonian time (Aoucert and Smara areas,Moroccan Sahara)

International Journal of Earth Sciences - Detrital zircon provenance studies are an established tool to develop palaeogeographic models, mostly based on zircon of siliciclastic rocks and isotope...