Characterization of alkanes, hopanes, and polycyclic aromatic hydrocarbons (PAHs) in tar-balls collected from the East Coast of Peninsular Malaysia

The East Coast of Peninsular Malaysia faces the South China Sea and is vulnerable to oil pollution because of intense petroleum production activities in the area. The South China Sea is also a favored route for supertankers carrying crude oil to the Far East. Consequently, oil spills can occur, causing pollution and contamination in the surrounding areas. Residual oil spills stranded on coastal beaches usually end up as tar-balls. Elucidating the sources of tar-balls using a molecular marker approach is essential in assessing environmental impacts and perhaps settling legal liabilities for affected parties. This study utilizes a multimodal molecular marker approach through the use of diagnostic ratios of alkanes, hopanes, and polycyclic aromatic hydrocarbons (PAHs) to determine the source, distribution and weathering of tar-balls. Hopane ratios (e.g., C29/C30, and summation C31-C35/C30 ratios) were used to identify the sources of tar-balls. The weathering effects were distinguished by using alkanes, namely the unresolved complex mixture (UCM) and low molecular weight/high molecular weight (L/H) ratios. Similarly, PAHs were also used for the determination of weathering processes undergone by the tar-balls. This multimodal molecular marker gave a very strong indication of the sources of tar-balls in this study. For example, 16 out of 17 samples originated from South East Asian Crude Oil (SEACO) with one sample from Merang, Terengganu originating from North Sea Oil (Troll). The TRME-2 sample may have come from a supertanker's ballast water discharge. The second possibility is that the tar-ball may have been transported via oceanographic currents. All 'weathered' sample characterizations were based on the presence of UCM and other ratios. The multimodal molecular marker approach applied in this study has enabled us to partially understand the transport behavior of tar-balls in the marine environment and has revealed insights into the weathering process of tar-balls.     

Investigation of the geochemical impact of CO2 on shallow groundwater: design and implementation of a CO2 injection test in Northeast Germany

A small scale and temporally limited CO₂ injection test was performed in a shallow aquifer to investigate the geochemical impact of CO₂ upon such aquifers and to apply and verify different monitoring methods. Detailed site investigation coupled with multiphase simulations were necessary to design the injection experiment and to set up the monitoring network, before CO₂ was injected over a ten-day period at three injection wells, at a depth of 18?m below surface level into a quaternary sand aquifer located close to the town of Wittstock in Northeast Germany. Monitoring methods comprised groundwater sampling and standard analyses, as well as trace element analyses and isotope analyses; geoelectrical borehole monitoring; passive samplers to analyse temporally integrated for cations and multi-parameter probes that can measure continuously for dissolved CO₂, pH and electrical conductivity. Due to CO₂ injection, total inorganic carbon concentrations increased and pH decreased down to a level of 5.1. Associated reactions comprised the release of major cations and trace elements. Geoelectrical monitoring, as well as isotope analyses and multi-parameter probes proved to be suitable methods for monitoring injected CO₂ and/or the alteration of groundwater.     

The impact of a storm surge on business establishments in the Houston MSA

This paper examines the possible storm surge damage from a major hurricane to hit the Houston Metropolitan Statistical Area (MSA.) Using storm surge analysis on a unique data set compiled from the Texas Workforce Commission (QCEW), the paper estimates the expected industry-level damage for each county in the Houston MSA. The advantages of using GIS to analyze the expected storm surge damage estimation is that it provides an accurate estimation of the number of affected employees and probable wages losses, by industry and county, based on QCEW data. The results indicate that the ‘Basic Chemical Manufacturing’ and ‘Oil and Gas Extraction’ industries incur the highest employee and payroll losses while the ‘Restaurants and Eateries’ has the largest establishment damage if a major hurricane were to hit the Houston MSA.     

Assessment of institutional capacity to adapt to climate change in transboundary river basins

Responses to climate change in transboundary river basins are believed to depend on national and sub-national capacities as well as the ability of co-riparian nations to communicate, coordinate, and cooperate across their international boundaries. We develop the first framework for assessing transboundary adaptive capacity. The framework considers six dimensions of transboundary river basins that influence planning and implementation of adaptation measures and represents those dimensions using twelve measurable indicators. These indicators are used to assess transboundary adaptive capacity of 42 basins in the Middle East, Mediterranean, and Sahel. We then conduct a cluster analysis of those basins to delineate a typology that includes six categories of basins: High Capacity, Mediated Cooperation, Good Neighbour, Dependent Instability, Self-Sufficient, and Low Capacity. We find large variation in adaptive capacity across the study area; basins in Western Europe generally have higher capacities to address the potential hazards of climate change. Our basin typology points to how climate change adaptation policy interventions would be best targeted across the different categories of basins.     

Exposure history of the St‐Robert (H5) fall

Abstract— The compositionally typical H5 chondrite St‐Robert has an exposure age, 7.8 Ma, indistinguishable from that of the main cluster of H chondrites. Small values of the cosmogenic ²²Ne/²¹Ne ratio in interior samples imply a pre‐atmospheric radius on the order of 40 cm. Sample depths based on tracks and the production rates of Bhattacharya et al. (1973) range from 6 to ～40 cm and are generally larger than depths estimated from published ⁶⁰Co activities, perhaps because the track production rates adopted are too high. Depth profiles of the production rates of ¹⁴C, ³⁶Cl, ²⁶Al, ¹⁰Be, and ²¹Ne in stony material show increases with depth and reach levels 5% to 15% higher than expected from modeling calculations. The maximum concentrations in St‐Robert are, however, generally comparable to those measured for the L5 chondrite, Knyahinya, whose pre‐atmospheric radius of ～45 cm is thought to lead to the maximum possible production rates in chondrites. We infer that the pre‐atmospheric radius of St‐Robert was within 5 cm of the value that supports maximum production rates (i.e., 45 ± 5 cm). This radius corresponds to a pre‐atmospheric mass of (1.3 ± 0.4) × 10³ kg. The agreement of exposure ages for St‐Robert obtained in several different ways and the similarity of the depth profiles for ¹⁴C, ²⁶Al, ¹⁰Be, and ²¹Ne argue against a lengthy pre‐exposure of St‐Robert on the parent body and against a two‐stage exposure after launch from the parent body. Following Morbidelli and Gladman (1998), we suggest that St‐Robert was chipped from deep in its parent body, spent the next 7–8 Ma without undergoing a major collision, was nudged gradually into an orbital resonance with Jupiter, and then traveled quickly to Earth.     

Dynamic tensile strength of terrestrial rocks and application to impact cratering

Abstract— Dynamic tensile strengths and fracture strengths of 3 terrestrial rocks, San Marcos gabbro, Coconino sandstone, and Sesia eclogite were determined by carrying out flat‐plate (PMMA and aluminum) impact experiments on disc‐shaped samples in the 5 to 60 m/sec range. Tensile stresses of 125 to 300 MPa and 245 to 580 MPa were induced for gabbro and eclogite, respectively (with duration time of ?1 μs). For sandstone (porosity 25%), tensile stresses normal to bedding of ?13 to 55 MPa were induced (with duration times of 2.4 and ?1.4 μs). Tensile crack failure was detected by the onset of shock‐induced (damage) P and S wave velocity reduction. The dynamic tensile strength of gabbro determined from P and S wave velocity deficits agrees closely with the value of previously determined values by post‐impact microscopic examination (?150 MPa). Tensile strength of Coconino sandstone is 20 MPa for a 14 μs duration time and 17 MPa for a 2.4 μs duration time. For Sesia eclogite, the dynamic tensile strength is ?240 MPa. The fracture strength for gabbro is ?250 MPa, ?500 MPa for eclogite, and ?40 MPa for sandstone. Relative crack‐induced reduction of S wave velocities is less than that of post‐impact P wave velocity reductions for both gabbro and eclogite, indicating that the cracks were predominantly spall cracks. Impacts upon planetary surfaces induce tensile failure within shock‐processed rocks beneath the resulting craters. The depth of cracking beneath impact craters can be determined both by seismic refraction methods for rocks of varying water saturation and, for dry conditions (e.g., the Moon), from gravity anomalies. In principle, depth of cracking is related to the equations‐of‐state of projectile and target, projectile dimension, and impact velocity. We constructed a crack‐depth model applicable to Meteor Crater. For the observed 850 m depth of cracking, our preferred strength scaling model yields an impact velocity of 33 km/s and impactor radius of 9 m for an iron projectile.     

Composition of the Crystalline Basement and Shock Metamorphism of Crystalline and Sedimentary Target Rocks at the Haughton Impact Crater,Devon Island,Canada

Abstract— About 100 cobble-sized samples collected from the surface of the central polymict breccia formation of Haughton impact crater, Canada, have been studied microscopically and chemically. Breccia clasts derived from the 1700 m deep Precambian basement consist of 13 rock types which can be grouped into sillimanite- and garnet-bearing gneiss; alkali feldspar-rich aplitic or biotite-hornblende-bearing gneiss; biotite and hornblende gneiss; apatite-rich biotite and biotite-hornblende gneiss; calcitediopside gneiss; amphibolite; tonalitic orthogneiss; and basalts. The range of chemical compositions of these rocks is wide: e.g., SiO₂ ranges from 40–85 wt.%; Al₂O₃ from 7–20 wt.%; CaO from 0.01–25 wt.%; or P₂O_s from <0.01–5 wt.%. Nearly all samples of crystalline rocks are shock metamorphosed up to about 60 GPa. Most conspicuous is the absence of whole-rock melts and the very rare occurrence of unshocked rocks. The 45 samples examined can be classified into the following shock stages: stage 0 (<5 GPa): 4.5%, stage Ia (10–20 GPa): 9.0%, stage Ib (20–35 GPa): 33%, stage II (35–45 GPa): 29%, stage III (45–55 GPa): 18%, stage III–IV (55–60 GPa): 6.5%. Among Paleozoic sedimentary rock clasts higher degrees of shock than within crystalline rocks were observed such as highly vesiculated, whole-rock melts of sandstones and shales. Within the northern and eastern sectors of the allochthonous breccia no distinct radial variation of the cobble-sized lithic clasts regarding abundance, rock type, and degree of shock was observed, with the exception that clasts of shock-melted sedimentary rocks and of highly shocked basement rocks (stage III–IV) are strongly concentrated near the center of the crater. Based on our field and laboratory investigations we conclude that vaporization and melting due to the Haughton impact affected the lower section of the sedimentary strata from about 900 to 1700 m depth (Eleanor River limestones and dolomites, Lower Ordovician and Cambrian limestones, dolomites, shales, and sandstones). The 60-GPa shock pressure isobar reached only the uppermost basement rocks so that whole rock melting of the crystalline rocks was not possible.     

Theoretical Ne VI/Mg VI line diagnostics for SUMER

Theoretical Nevi/Mgvi EUV line emissivity ratios, suitable for density-measurements in various solar features such as active regions, sunspots, umbrae and flare plasmas and to be observed in the SUMER spectral range, are presented and their applications discussed with the help of available observational data.     

Review of Modeling Approaches to Groundwater Flow in Deformed Carbonate Aquifers

We discuss techniques to represent groundwater flow in carbonate aquifers using the three existing modeling approaches: equivalent porous medium, conduit network, and discrete fracture network. Fractures in faulted stratigraphic successions are characterized by dominant sets of sub-vertical joints. Grid rotation is recommended using the equivalent porous medium to match higher hydraulic conductivity with the dominant orientation of the joints. Modeling carbonate faults with throws greater than approximately 100 m is more challenging. Such faults are characterized by combined conduit-barrier behavior. The barrier behavior can be modeled using the Horizontal Flow Barrier Package with a low-permeability vertical barrier inserted to represent the impediment of horizontal flow in faults characterized by sharp drops of the piezometric surface. Cavities can occur parallel to the strike of normal faults generating channels for the groundwater. In this case, flow models need to account for turbulence using a conduit network approach. Channels need to be embedded in an equivalent porous medium due to cavities a few centimeters large, which are present in carbonate aquifers even in areas characterized by low hydraulic gradients. Discrete fracture network modeling enables representation of individual rock discontinuities in three dimensions. This approach is used in non-heavily karstified aquifers at industrial sites and was recently combined with the equivalent porous medium to simulate diffusivity in the matrix. Following this review, we recommend that the future research combines three practiced modeling approaches: equivalent porous medium, discrete fracture network, and conduit network, in order to capture structural and flow aspects in the modeling of groundwater in carbonate rocks.     

Mineralogical and geochemical characteristics of Miocene pelitic sedimentary rocks from the south-western part of the Pannonian Basin System (Croatia): Implications for provenance studies

Fifty-two samples of Miocene pelitic sedimentary rock from outcrops on Medvednica,Moslavacka Gora and Psunj Mts.,and boreholes in the Sava Depression and the Pozega Sub-depression were investigated.These sediments formed in different marine(with normal and reduced salinity),brackish,and freshwater environments,depending on the development stage of the Pannonian Basin System.Carbonate minerals,clay minerals and quartz are the main constituents of all pelitic sedimentary rocks,except in those from Moslavacka Gora Mt in which carbonate minerals are not present.Feldspars,pyrite,opal-CT,and hematite are present as minor constituents in some rocks.Besides calcite,dependent on the sedimentary environment and diagenetic changes,high-magnesium calcite,aragonite,dolomite and ankerite/Cadolomite are also present.Smectite or illite-smectite is the main clay minerals in the samples.Minor constituents,present in almost all samples,are detrital illite and kaolinite.In some samples chlorite is also present in a low amount.Major elements,trace elements and rare earth elements patterns used in provenance analysis show that all analysed samples have a composition similar to the values of the upper continental crust(UCC).The contents of major and trace elements as well as SiO_2/Al_2O_3,K_2O/Al_2O_3,Na_2O/K_2O,Eu/Eu~*,La/Sc,Th/Sc,La/Co Th/Co,Th/Cr,Ce/Ce~* and LREE/HREE ratios,show that the analysed pelitic sedimentary rocks were formed by weathering of different types of mostly acidic(silicic),i.e.felsic rocks.