Hydrologic characteristics of Appalachian loose‐dumped spoil in the Cumberland Plateau of eastern Kentucky

Heavily compacted lands, typical of traditional surface mine reclamation techniques, have been shown to hinder tree growth, increase levels of flooding, and produce suboptimal water quality. Utilizing loose‐dumped spoil, in accordance with the Forestry Reclamation Approach (FRA), has demonstrated success with regards to promoting tree growth and survival; however, additional information is needed to assess the potential of FRA to ameliorate other environmental concerns related to water quantity. To better understand the hydrologic characteristics of loose‐dumped spoil, key hydrograph parameters (discharge volume, peak discharge, discharge duration, lag time, and response time) were monitored for three common spoil types: (1) predominately brown weathered sandstone, (2) predominately gray weathered sandstone, and (3) a mixture of both sandstones and shale. Although spoil types were found to differ hydrologically, these differences were relatively minor. Measured discharge volumes were low (averaging 12% of rainfall for all events and treatments), peak discharge rates were small (between 2·5 × 10^?5 and 3 × 10^?3 m³/s), and the duration of discharge was long (6 days on average). From a hydrologic perspective, the results of this study indicate that mine spoils need not be segregated for reclamation as long as the spoil is placed in accordance with the loose‐dumped techniques as outlined in the FRA. Copyright © 2009 John Wiley & Sons, Ltd.     

On the solution of steady unconfined seepage towards semi-infinite slopes

Analytical solutions for the two-dimensional problem of unconfined seepage towards semi-infinite slopes are described. The analysis employs complex variable techniques. Conformal mappings have been used to reduce the problem to solving an ordinary differential equation. The resulting integrals are presented in terms of special functions. The solutions for the location of the phreatic surface and the exit point have been obtained in parametric form. Some additional results and asymptotic expansions of the solutions are also presented. The numerical results have been calculated and plotted for different values of the slope angle in dimensionless co-ordinate space.     

Implementation of the European water framework directive from the Basque country (northern Spain): a methodological approach

The European Water Framework Directive provides a challenge in the development of new and accurate methodologies. It addresses assessment of Ecological Quality Status within European rivers, lakes, groundwaters, estuaries and coasts. Although this directive is simple and flexible in its concept, it is necessary to develop an approach based upon scientific knowledge; however, at the same time it should be as simple as possible, in order to achieve both requirements and comparability of results throughout European waters. This contribution presents the first methodological approach to the problem, as used for estuaries and coasts of the Basque Country (northern Spain), in: selecting typologies and reference conditions; determining biological quality and ecological status; and identifying some problems in implementing the WFD. As such, the present paper could serve as the basis for a discussion document for other regions and countries, throughout Europe.     

Efficient execution of the WRF model and other HPC applications in the cloud

There are many scientific applications that have high performance computing (HPC) demands. Such demands are traditionally supported by cluster- or Grid-based systems. Cloud computing, which has experienced a tremendous growth, emerged as an approach to provide on-demand access to computing resources. The cloud computing paradigm offers a number of advantages over other distributed platforms. For example, the access to resources is flexible and cost-effective since it is not necessary to invest a large amount of money on a computing infrastructure nor pay salaries for maintenance functions. Therefore, the possibility of using cloud computing for running high performance computing applications is attractive. However, it has been shown elsewhere that current cloud computing platforms are not suitable for running some of these kinds of applications since the performance offered is very poor. The reason is mainly the overhead from virtualisation which is extensively used by most cloud computing platforms as a means to optimise resource usage. Furthermore, running HPC applications in current cloud platforms is a complex task that in many cases requires configuring a cluster of virtual machines (VMs). In this paper, we present a lightweight virtualisation approach for efficiently running the Weather Research and Forecasting (WRF) model (a computing- and communication-intensive application) in a cloud computing environment. Our approach also provides a higher-level programming model that automates the process of configuring a cluster of VMs. We assume such a cloud environment can be shared with other types of HPC applications such as mpiBLAST (an embarrassingly parallel application), and MiniFE (a memory-intensive application). Our experimental results show that lightweight virtualisation imposes about 5 % overhead and it substantially outperforms traditional heavyweight virtualisation such as KVM.     

On the role of tides and strong wind events in promoting summer primary production in the Barents Sea

Tides and wind-driven mixing play a major role in promoting post-bloom productivity in subarctic shelf seas. Whether this is also true in the high Arctic remains unknown. This question is particularly relevant in a context of increasing Arctic Ocean stratification in response to global climatic change. We have used a three-dimensional ocean-sea ice-plankton ecosystem model to assess the contribution of tides and strong wind events to summer (June-August 2001) primary production in the Barents Sea. Tides are responsible for 20% (60% locally) of the post-bloom primary production above Svalbard Bank and east of the Kola Peninsula. By contrast, more than 9% of the primary production is due to winds faster than 8 m s⁻¹ in the central Barents Sea. Locally, this contribution reaches 25%. In the marginal ice zone, both tides and wind events have only a limited effect on primary production (<2%). Removing tides or winds faster than 8 m s⁻¹ promotes a regime more sustained by regenerated production with a f-ratio (i.e. the proportion of nitrate-based “new” primary production in the total primary production) that decreases by up to 26% (east of the Kola Peninsula) or 35% (central Barents Sea), respectively. When integrated over all Barents Sea sub-regions, tides and strong wind events account, respectively, for 6.8% (1.55 Tg C; 1 Tg C=10¹² g C) and 4.1% (0.93 Tg C) of the post-bloom primary production (22.6 Tg C). To put this in context, this contribution to summer primary production is equivalent to the spring bloom integrated over the Svalbard area. Tides and winds are significant drivers of summer plankton productivity in the Barents Sea.     

Petrophysical properties, composition and deterioration of the Calatorao biogenic stone: case of the sculptures masonry of the Valley of the Fallen (Madrid, Spain)

The huge sculptures placed outdoors in the Valley of the Fallen Memorial Park (El Escorial, Madrid) made with blocks of Black-Limestone from Calatorao-Zaragoza, Spain (BLCZ) and disposed on a concrete core exhibit weathering traces, flaking, saline efflorescence and falling fragments, currently represent a danger for visitors. Frost action is important in the Valley of the Fallen by the large number of freeze–thaw cycles produced during Sculptures‘live under a temperate Mediterranean climate with severe seasonality. The formation of fissures facilitates the water transport within the rock and the salt- and ice-induced deterioration. Temperate climates with frequent freezing and thawing cycles can be the most effective drivers of the visible physical weathering. In order to propose a suitable weathering model, collected black-limestones from sculptures and Calatorao quarries were analyzed by optical microscopy, environmental scanning electron microscopy with energy dispersive spectrometry (ESEM-EDS), inductively coupled mass spectrometry (ICP-MS) and X-ray diffraction. Mercury intrusion porosimetry (MIP), nitrogen absorption and helium pycnometry techniques were used for pore analyses of the BLCZ micro-blocks (10 × 10 × 10 cm) described in terms of pore size distribution, pore volume and specific surface area. The appreciable amount of organic matter was isolated by solvent extraction, acid treatment, flotation and perborate degradation followed by Gas Chromatography–Mass Spectrometry (GC–MS), Analytical Pyrolysis (Py-GC/MS), Fourier Transformed Infrared Spectroscopy and Raman techniques. Both weathered and fresh BLCZ samples contained more than 90 % calcite shells with circa 10 % of pyrite (fresh samples) or iron hydroxides (weathered samples), quartz grains, claystone and fossil organic matter consisting of a condensed matrix with polyalkyl chains and polycyclic methoxyl-lacking aromatic structures. The petrophysical analyses revealed volumes of pores, sized <0.025 μm obtained by N₂ adsorption, of 3.18 × 10^?3 cm³ g^?1 while the measured porosity by MIP in the pore range from 0.005 to 200 μm was 3.30 × 10^?3 cm³ g^?1. These data could be explained by the existence of clay minerals and organic matter in the pore system less than 50 nm of diameter. Concerning BLCZ deterioration it was found that the porous framework of BLCZ was filled with sulphates formed from artificial cement observed in the sculptures inside trough a testing hole and from its intrinsic pyrite. The results suggested that although biological processes were not major agents in rock deterioration, there was also weak compatibility between sculptures‘constituents, (limestone, concrete and oxidized iron clamps) which under, continental Mediterranean conditions, were continuously releasing weathering compounds accelerating disruption of the cut-stone sculptures.     

Beyond REDD+ readiness: land-use governance to reduce deforestation in Peru

Peru contains the fourth largest area of tropical forest in the world, yet faces a worsening net deforestation rate. In 2008, to address this threat, the national government announced its ambition to reduce deforestation to zero by 2021. Via literature review and key informant interviews, this study assess two years of REDD+ readiness preparations according to six readiness functions. A mixed pattern of outcomes emerge. Although significant advances were made by various local-level initiatives, national-level efforts continue to struggle. Three crucial challenges persist: (1) greater involvement and coordination of ministries and government agencies associated with REDD+ planning, (2) better understanding of deforestation agents and drivers, and (3) integration of REDD+ policies into national and regional plans, which includes clarification of safeguard procedures and design of incentive mechanisms. Integrated land use planning is presented as a platform to foster dialogue that helps to reconcile divergent stakeholder perspectives, coordinate changes to land use, and resolve overlapping land rights.

Policy relevance

This article presents the outcomes of a multi-dimensional assessment of the REDD+ readiness process in Peru. The six key functions in the analytical framework provide the opportunity to evaluate the process in an integrated and systematic manner and highlights the persistence of complex, transversal governance challenges across diverse economic sectors and government agencies. Research findings also reveal a need for policy change and continued investment to ensure success of the national process in Peru. Strong leadership is needed to generate consensus in cross-sectoral negotiations and to establish coordinated land governance and monitoring mechanisms.     

Trace metals associated with deep-sea tailings placement at the Batu Hijau copper–gold mine,Sumbawa, Indonesia

The Batu Hijau copper–gold mine on the island of Sumbawa, Indonesia operates a deep-sea tailings placement (DSTP) facility to dispose of the tailings within the offshore Senunu Canyon. The concentrations of trace metals in tailings, waters, and sediments from locations in the vicinity of the DSTP were determined during surveys in 2004 and 2009. In coastal and deep seawater samples from Alas Strait and the South Coast of Sumbawa, the dissolved concentrations of Ag, As, Cd, Cr, Hg, Pb and Zn were in the sub μg/L range. Dissolved copper concentrations ranged from 0.05 to 0.65 μg/L for all depths at these sites. Dissolved copper concentrations were the highest in the bottom-water from within the tailings plume inside Senunu Canyon, with up to 6.5 μg Cu/L measured in close proximity to the tailings discharge. In general, the concentrations of dissolved and particulate metals were similar in 2004 and 2009.