Searching for planets by differential astrometry with large telescopes

Traditional astrometric methods are limited in accuracy by the atmosphere in a way that does not show much improvement with increased telescope aperture. However, there is the potential for very high accuracy with large telescopes if advantage can be taken of these factors: First, the differential atmospheric distortion of images of closely adjacent stars is less with larger aperture; second, the diffraction limit is sharper, and third, photon statistics are improved. In this paper we analyze and give experimental tests of techniques that could be applied to the detection of planets with the mass of Jupiter or Uranus, if they are present in nearby binary star systems.The atmospheric perturbation of the relative position of the energy centroids measured in short exposure images of binary stars depends on the effective height of the turbulent distortion. For a 4-meter telescope, the error in centroid determination of a 4-arcsec binary can be as small as 20 milliarcsec (mas) in a single 20-millisecond (msec) exposure. The relative position measured by cross-correlation of short exposure speckle images, as suggested by McAlister (1977b), may give even higher accuracy. In this case, Roddier (Roddieret al., 1980) has shown that the atmospheric error depends on the thickness rather than the height of the layers that make the dominant contribution to the turbulence. Through Monte Carlo analysis we show that on occasions when the turbulence arises largely in a thin layer, a single 20-msec exposure of a 4-arcsec binary taken with a 4-m aperture can yield an astrometric accuracy of order 0.5 mas.We report on experiments made at the Steward Observatory 2.3-m telescope which achieved accuracies corresponding to 1.7 mas in a 2.24-arcsec binary and 16.1 mas in a 6.0-arcsec binary with only 15 and 18 specklegram pairs respectively. We plan to use the 6.5-m converted MMT to obtain much higher performance, between 4.0 mas and 0.40 masper independent specklegram pair, depending upon atmospheric conditions, for binaries of 4-arcsec separation. By cycling rapidly through perhaps 100 binaries, thus calibrating systematic errors through the average change in binary separation, Jupiter-mass planets may be detectable with small but regular access to the telescope.Paper presented at the Conference onPlanetary Systems: Formation, Evolution, and Detection held 7–10 December, 1992 at CalTech, Pasadena, California, U.S.A.     

Iron,manganese and trace metal concentrations in seaweeds from the central west coast of the Gulf of California

Concentrations of Co, Cu, Fe, Mn, Ni, Pb and Zn in four macroalgae species (Ulva lactuca, Chondracanthus squarrulosus, Sargassum sinicola and Gracilariopsis lemaneiformis) were obtained for the first time from the central part of the west coast of the Gulf of California. Generally, no differences in metal concentrations were found among the different seaweed species, although spatial differences were apparent. Iron, Mn and Cu exhibited higher concentrations at the stations located in front of Angel de la Guarda Island, probably because of high vertical mixing processes present in the zone. The results were compared with dissolved metal concentrations reported for the Gulf of California (Cd, Mn and Fe) and the North Pacific Ocean. The resulting linear regression of the results vs. North Pacific Ocean concentrations indicated that the levels of Cu, Ni and Zn measured in this study were within its 95% confidence level. Furthermore, this comparison was capable of detecting dissolved Fe and Mn enrichments in Gulf of California waters relative to the North Pacific Ocean concentrations. Calculations of total masses of metals associated with algal biomass on the west coast of the Gulf of California indicated that the lowest masses were represented by Cu (108 ± 25 kg) and Ni (184 ± 52 kg), whereas Pb (1.1 ± 0.6 ton) and Fe (10.9 ± 8.5 ton) were the elements with the highest associated masses.     

Study of the Contributions of Non‐Specific and Specific Interactions during Fluoxetine Adsorption onto Activated Carbons

The adsorption of fluoxetine onto activated carbons (ACs) prepared from almond tree pruning by steam and CO₂ activation under different temperature conditions (650–950°C), was studied. In both series increasing the temperature caused an increase in the BET apparent surface area, yielding ACs with S_BET up to 870 and 710 m² g^?1 after steam and CO₂ activation, respectively. Also, a slight widening of the porosity was found in both cases. In order to modify the functionality of the ACs, two of them were impregnated with triethylenediamine (TEDA) prior to the adsorption process, which caused a decrease in the AC apparent surface mainly due to micropore blockage. The fluoxetine adsorption isotherms at 25°C showed maximum adsorption capacities between 110 and 224 mg g^?1. The adsorption isotherms were analyzed using Langmuir and Freundlich models. Although the impregnation reduced the pore volume, it did not cause a decrease in the fluoxetine maximum adsorption capacity, but a modification in the adsorption mechanism was observed.     

Hydrologic characteristics of Appalachian loose‐dumped spoil in the Cumberland Plateau of eastern Kentucky

Heavily compacted lands, typical of traditional surface mine reclamation techniques, have been shown to hinder tree growth, increase levels of flooding, and produce suboptimal water quality. Utilizing loose‐dumped spoil, in accordance with the Forestry Reclamation Approach (FRA), has demonstrated success with regards to promoting tree growth and survival; however, additional information is needed to assess the potential of FRA to ameliorate other environmental concerns related to water quantity. To better understand the hydrologic characteristics of loose‐dumped spoil, key hydrograph parameters (discharge volume, peak discharge, discharge duration, lag time, and response time) were monitored for three common spoil types: (1) predominately brown weathered sandstone, (2) predominately gray weathered sandstone, and (3) a mixture of both sandstones and shale. Although spoil types were found to differ hydrologically, these differences were relatively minor. Measured discharge volumes were low (averaging 12% of rainfall for all events and treatments), peak discharge rates were small (between 2·5 × 10^?5 and 3 × 10^?3 m³/s), and the duration of discharge was long (6 days on average). From a hydrologic perspective, the results of this study indicate that mine spoils need not be segregated for reclamation as long as the spoil is placed in accordance with the loose‐dumped techniques as outlined in the FRA. Copyright © 2009 John Wiley & Sons, Ltd.     

Petrophysical properties, composition and deterioration of the Calatorao biogenic stone: case of the sculptures masonry of the Valley of the Fallen (Madrid, Spain)

The huge sculptures placed outdoors in the Valley of the Fallen Memorial Park (El Escorial, Madrid) made with blocks of Black-Limestone from Calatorao-Zaragoza, Spain (BLCZ) and disposed on a concrete core exhibit weathering traces, flaking, saline efflorescence and falling fragments, currently represent a danger for visitors. Frost action is important in the Valley of the Fallen by the large number of freeze–thaw cycles produced during Sculptures‘live under a temperate Mediterranean climate with severe seasonality. The formation of fissures facilitates the water transport within the rock and the salt- and ice-induced deterioration. Temperate climates with frequent freezing and thawing cycles can be the most effective drivers of the visible physical weathering. In order to propose a suitable weathering model, collected black-limestones from sculptures and Calatorao quarries were analyzed by optical microscopy, environmental scanning electron microscopy with energy dispersive spectrometry (ESEM-EDS), inductively coupled mass spectrometry (ICP-MS) and X-ray diffraction. Mercury intrusion porosimetry (MIP), nitrogen absorption and helium pycnometry techniques were used for pore analyses of the BLCZ micro-blocks (10 × 10 × 10 cm) described in terms of pore size distribution, pore volume and specific surface area. The appreciable amount of organic matter was isolated by solvent extraction, acid treatment, flotation and perborate degradation followed by Gas Chromatography–Mass Spectrometry (GC–MS), Analytical Pyrolysis (Py-GC/MS), Fourier Transformed Infrared Spectroscopy and Raman techniques. Both weathered and fresh BLCZ samples contained more than 90 % calcite shells with circa 10 % of pyrite (fresh samples) or iron hydroxides (weathered samples), quartz grains, claystone and fossil organic matter consisting of a condensed matrix with polyalkyl chains and polycyclic methoxyl-lacking aromatic structures. The petrophysical analyses revealed volumes of pores, sized <0.025 μm obtained by N₂ adsorption, of 3.18 × 10^?3 cm³ g^?1 while the measured porosity by MIP in the pore range from 0.005 to 200 μm was 3.30 × 10^?3 cm³ g^?1. These data could be explained by the existence of clay minerals and organic matter in the pore system less than 50 nm of diameter. Concerning BLCZ deterioration it was found that the porous framework of BLCZ was filled with sulphates formed from artificial cement observed in the sculptures inside trough a testing hole and from its intrinsic pyrite. The results suggested that although biological processes were not major agents in rock deterioration, there was also weak compatibility between sculptures‘constituents, (limestone, concrete and oxidized iron clamps) which under, continental Mediterranean conditions, were continuously releasing weathering compounds accelerating disruption of the cut-stone sculptures.     

Subsidence and strike-slip tectonism of the upper continental slope off Manzanillo, Mexico

The direction of convergence between the Rivera and North American plates becomes progressively more oblique (in a counter-clockwise sense as measured relative to the trench-normal direction) northwestward along the Jalisco subduction zone. By analogy to other subduction zones, the forces resulting from this distribution of convergence directions are expected to produce a NW moving, fore-arc sliver and a NW–SE stretching of the fore-arc area. Also, a series of roughly arc parallel strike-slip faults may form in the fore-arc area, both onshore and offshore, as is observed in the Aleutian arc.In the Jalisco subduction zone, the Jalisco block has been proposed to represent such a fore-arc sliver. However, this proposal has encountered one major problem. Namely, right-lateral strike-slip faulting within the fore-arc sliver, and between the fore-arc sliver and the North American plate, should be observed. However, evidence for the expected right-lateral strike-slip faulting is sparse. Some evidence for right-lateral strike-slip faulting along the Jalisco block–North American plate boundary (the Tepic–Zacoalco rift system) has been reported, although some disagreement exists. Right-lateral strike-slip faulting has also been reported within the interior of the Jalisco block and in the southern Colima rift, which forms the SE boundary of the Jalisco block.Threefold, multi-channel seismic reflection data were collected in the offshore area of the Jalisco subduction zone off Manzanillo in April 2002 during the FAMEX campaign of the N/O L'Atalante. These data provide additional evidence for recent strike-slip motion within the fore-arc region of the Jalisco subduction zone. This faulting offsets right-laterally a prominent horst block within the southern Colima rift, from which we conclude that the sense of motion along the faulting is dextral. These data also provide additional evidence for recent subsidence within the area offshore of Manzanillo, as has been proposed.     

CoastLearn: Lessons learnt from a web-based capacity building in Integrated Coastal Zone Management (ICZM)

The capacity building initiatives for the Integrated Coastal Zone Management (ICZM) intend to create, in a worldwide perspective, a capable critical mass. CoastLearn is one of such outstanding efforts. Through the application of questionnaires to students and to the course coordinator, in addition to its website information, positive features and also aspects that can be improved were recognized. This paper aims at establishing some statements and providing recommendations about aspects to be considered by ICZM capacity building efforts. The outstanding recommendations are the development of feedback policy, the creation of online tutors and discussion forums, always considering the attendants' needs.