In Situ Measurement of Pinna nobilis Shells for Age and Growth Studies: A New Device

Abstract. Pinna nobilis Linnaeus 1758 is an endemic bivalve mollusc in the Mediterranean Sea, where it inhabits seagrass meadows, especially Posidonia oceanica (L.) Delile. It is the largest bivalve in the Mediterranean, reaching lengths up to 120 cm. In its natural habitat, P. nobilis lives with the anterior part of the valve buried in the seabed, attached to Posidonia rhizomes by byssus threads.
This habit makes it impossible to measure its total length directly in situ. As the only way to determine the individual age is the relationship between age and total length, several equations have been proposed to estimate total length by relating it to the unburied parts of the shell. Such measurements are essential to ecological studies that consider age, growth, and population dynamics, and that evaluate the environmental factors that affect this species.
Accurately estimating total length depends on the accuracy and precision of the method employed to measure the unburied shell parts. In this paper, we point out the lack of precision of the instruments and methods used until now; we also demonstrate the reason for this imprecision. A new device to measure unburied parts of Pinna nobilis with a precision comparable to that obtained when measuring extracted valves is described. This device is unaffected by substratum type and reduces measurement time. The latter is a very important feature, because these procedures are usually performed whilst SCUBA diving. Finally, a growth equation has been fitted to the measurements obtained with the new device from a population located in Moraira (Alicante, western Mediterranean).     

Preliminary attempt to characterize the rotation of seafloor in the Pito Deep area of the Easter Microplate using a submersible magnetometer

Several mechanisms have been proposed to account for the rotation of the nearly north-south abyssal hill fabric formed on the East Pacific Rise north of the Easter Microplate to the nearly east-west trends in the northern microplate interior. Proposed mechanisms include rigid microplate rotation, transform fault – parallel shear, and bookshelf faulting during the transfer of lithosphere from the Nazca Plate to the microplate. We used a submersible magnetometer on a NAUTILE dive program to measure the magnetic vector rotation of a pillow basalt and dike spur near Pito Deep, the present location of the tip of the propagating rift system that created the microplate. Our results, although too limited to draw strong conclusions from, suggest clockwise rotations of the seafloor magnetic vectors inconsistent with the transform-parallel shear model, and larger than can be explained solely by rigid microplate rotation.     

Active spreading and hydrothermalism in North Fiji Basin (SW Pacific). Results of Japanese French Cruise Kaiyo 87

The aim of the Japanese-French Kaiyo 87 cruise was the study of the spreading axis in the North Fiji Basin (SW Pacific). A Seabeam and geophysical survey allowed us to define the detailed structure of the active NS spreading axis between 16° and 22° S and its relationships with the left lateral motion of the North Fiji Fracture Zone. Between 21° S and 18°10′ S, the spreading axis trends NS. From 18°10 S to 16°40 S the orientation of the spreading axis changes from NS to 015°. North of 16°40′ S the spreading axis trends 160°. These two 015° and 160° branches converge with the left lateral North Fiji fracture zone around 16°40′ S to define an RRFZ triple junction. Water sampling, dredging and photo TV deep towing give new information concerning the hydrothermal activity along the spreading axis. The discovery of hydrothermal deposits associated with living communities confirms this activity.     

Sediment transport pattern at the Barra Nova inlet, south Portugal: a conceptual model

The Barra Nova inlet, in south Portugal, is known to migrate progressively southeastwards under wave action. The morphodynamics of this system during a representative year suggests that this long-term evolution is dependent on a seasonal behavior of the tidal inlet which can be described through a three-stage model of post-storm, transition and extended fair-weather conditions. Processes involved in this evolution indicate that the historical migration of the Barra Nova is not dependent on the longshore drift forcing constricting the channel on the updrift coast, but rather on the adjustment of the system to a major erosion of the downdrift coast during short storm events.     

Alboran Sea late cenozoic tectonic and stratigraphic evolution

Analysis of airgun seismic profiles from the Alboran Sea reveals a complex morphostructure with margins, basins, and structural highs. North of the Alboran Ridge, south-facing margins have a passive style of evolution, with thick progradational sequences of post-Messinian deposits, whereas north-facing margins are tectonized along structural highs with reduced sediment cover. Basins are extensional features developed since the Early Miocene by mechanisms of tectonic escape and pull-apart, under generalized northwest-southeast to north-south compression. Depositional sequences in this semi-land-locked sea were controlled by the local tectonism and influenced by global sea-level oscillations.     

Evidence for sinistral strike-slip deformation in The Solomon Island arc

During the SOPACMAPS 2 crusie carried out by IFREMER (Institut Français de Recherche pour l'Exploitation de la Mer) and ORSTOM (Institut Français de Recherche Scientifique pour le dévelopement en Coopération) on theR/V L'Atalante, in the Central Solomon Arc area, multibeam bathymetric and imagery data and single-channel seismic reflection profiles were collected from an area of about 3500 km², to evaluate regional tectonics. Structural data geophysical profiles interpretation provide evidence for left-lateral transtensional tectonics on the southern edge of the Central Solomon Trough. This transtensional deformation is represented by faulting, block tilting, and rhombohedral deformation. The regional geology and the analysis of the sedimentary cover allow us to demonstrate that this tectonic occurred in two different phases during Oligocene to Miocene and Pliocene to Pleistocene times.     

Geodynamic Evolution of the Eastern Segment of the Azores-Gibraltar Zone: The Gorringe Bank and the Gulf of Cadiz Region

Detailed structural interpretation of the recently acquired deep seismic multichannel profiles along the Iberian Atlantic Margins (IAM Project) provides new results on the geodynamic evolution of the eastern part of the Azores-Gibraltar plate boundary. Thrusting and folding of the oceanic basement and of Mesozoic and Cenozoic sedimentary cover of the Gorringe Bank region are consistent with the N–S convergence of Iberia and Africa. Compressive structures in the Gorringe Bank region are spread over a wide area. Deformation under compression took place mainly in Tertiary times, as is evidenced by a basal unconformity and several discontinuities in Tertiary sediments, although some deformation has also been recorded in Quaternary sediments. The compressive structures in the Gulf of Cadiz are E–W oriented thrusts, folds and related diapiric structures. N–S oriented transpressive deformation is likely to occur in the western Portuguese platform. There is no continuity of structures from the oceanic to the continental domain, suggesting that deformation transfers from one side to the other through a transcurrent fault zone. The fault contact between the two domains is located in the ocean-continent transition zone.     

Annual Cycle of Zooplankton Biomass, Abundance and Species Composition in the Neritic Area of the Balearic Sea, Western Mediterranean

Abstract. Seasonal changes in zooplankton biomass, abundance and species composition were studied at a neritic station in the Balearic Sea between April 1993 and May 1994. Sampling was carried out every 10 days in a zone influenced by the main current circulating through the Mallorca channel. Three main peaks of zooplankton biomass and abundance were observed: (1) at the beginning of summer when the thermocline developed, (2) in autumn when the thermocline broke down, and (3) in early spring. The smaller zooplankton fraction (100–250 μm) comprised on average 32 % of the total biomass and 73 % of total abundance. Copepods were the predominant group (64 % of the total abundance) with Clausocalanus, Oithona and Paracalanus being the most abundant genera. Paracalanus parvus, Clausocalanus furcatus, Acartia clausi, Oithona plumifera, Temora stylifera, Centropages typicus and Oncaea mediterranea were found to be the most important species in the area. Other abundant groups were cladocerans (15 %) and meroplankton larvae (12 %), both of which were particularly numerous during the stratified period. The copepod community was characterized by the above‐cited perennial species, which were abundant during the cycle studied. However, the influence of the hydrological conditions of the Balearic Sea, such as the Atlantic water influx and the physical structure of the water column (stratification and mixing), promoted the observed variability in zooplankton as well as the appearance of characteristic species during the annual cycle.     

Ocean bottom refraction seismograph (OBRS)

This paper describes a pop-up ocean bottom seismograph designed primarily for refraction surveys both on the continental shelf and in deep sea. Its development is the extension of our system based on seismic detectors located on the sea floor with radio transmission of seismic signals and used for seismic refraction studies on the continental shelf. The seismic detectors (vertical geophone or hydrophone and two orthogonally mounted horizontal geophones) are located outside of the pressure vessel on the main frame. Optionally, the seismic sensors may be decoupled from the main frame assembly. This decoupling is performed by a mobile arm positioning the separate three component sensor package on the sea floor.Contribution No. 455 of the Département Scientifique, Centre Océanologique de Bretagne.     

Reliability-based comparative study for mooring lines design criteria

The characteristic environmental load effect for the design of mooring systems of floating units can be defined by means of three procedures: (a) the one associated to an extreme sea state with a given return period, (b) the worst one from a set of sea states on a contour line associated to a return period or (c) the extreme one based on response statistics for a long-term period. This work presents the result of a reliability-based partial safety factor calibration study for a LRFD mooring line design criteria considering the three approaches mentioned above. The calibration exercise is applied to three FPSOs considering North Sea environmental conditions and different water depths: 200, 800 and 3000 m. The mooring systems investigated take into account mooring lines made up of chains and polyester ropes. It is shown that, among all cases investigated, the design procedure based on the long-term response is the one that presents less scattered reliability indices around the target level.