An early Miocene reefal platform in the Rama Ridge (Banda Sea, Indonesia)

 In December 1995 we dredged early Miocene coral-reef carbonates and early/middle Pliocene slope carbonates outcropping on the submerged Rama Ridge. This indicates that some of the Banda Sea Ridges were present during early Miocene times. Subsequent major tectonic subsidence occurred between middle Miocene and early Pliocene times. These results concur with the hypothesis of a relatively recent age for the North Banda Sea basement. Received: 5 March 1997 / Revision received: 23 October 1997     

Geochronology of the American-Antarctic Ridge

A new map of chrons for the American-Antarctic Ridge area has been compiled. Its analysis and the calculations performed showed that the seafloor spreading with respect to its axis started before 85 My B.P. The spreading directions were 115° (chrons C34-C29), 145° (chrons C29-C21), 110° (chrons C21-C5C), and 85° (chrons C5C-C1). The maximum rates of about 4 cm/year were reached earlier than 52 My B.P.; subsequently, a progressive general decrease in the spreading rate has been observed. According to our forecast, the spreading may cease in the following 3.5 My.     

Characterisation of Soot Emitted by Domestic Heating,Aircraft and Cars Using Diesel or Biodiesel

The characterisation of aggregates, like soot, firstly requires the determination of the size distribution of the primary particles. The primary particle size of combustion generated aggregates depends upon the combustion environment and the formation conditions, such as temperature, pressure and fuel-to-air ratio, among others. Since the combustion characteristics are different in the different types of burners, the characterisation of primary particles may offer the possibility to distinguish soot from different sources. In this paper, we present the signature of the primary particles and the aggregates of soot emitted by cars using diesel or biodiesel, by domestic heating, and by aircraft exhausts, which can be considered as the major sources as derived from measurements on transmission electron micrographs. The size distributions of all aggregates types with different aerodynamic diameter were log-normal and quasi-monodisperse. The size distribution of the primary particles for soot emitted by different sources showed minor differences. However, a comparison between the diameter of the primary particles and those obtained using a standard method for carbon black revealed discrepancies. The median diameter of the primary particles was combined with the median number of primary particles in an aggregate to calculate the relative particle surface area available for adsorption. In a similar way, the relative specific surface area was determined. The surface area was measured using the Brunauer-Emmett-Teller (B.E.T.) nitrogen adsorption method and the relative surface area available for adsorption was calculated.     

Biogeochemical Modelling of a Seasonally Anoxic Lake: Calibration of Successive and Competitive Pathways and Processes in Lake Aydat,France

A reactive transport model was developed to describe seasonal variations of biogeochemical and physical processes in Lake Aydat. The model includes physical processes such as vertical mixing, sedimentation and advection related to inflows into the lake and biogeochemical conversion processes in the water column and in the sediment surface layer. The reactions described in the model include primary redox reactions such as primary production, aerobic and anaerobic respiration, methanogenesis and secondary reactions established between oxidants and reducers produced by the primary reactions. After adjusting various kinetic constants, the model reasonably reproduced the main features of seasonal variations of dissolved oxygen and nitrate depth profiles and pH. The reactive transport model was also used to quantify the relative importance of different biogeochemical pathways. For instance, ferrous denitrification seems to play an important role when stratification is increasing.     

Tectonics of an extinct ridge-transform intersection,Drake Passage (Antarctica)

New swath bathymetric, multichannel seismic and magnetic data reveal the complexity of the intersection between the extinct West Scotia Ridge (WSR) and the Shackleton Fracture Zone (SFZ), a first-order NW-SE trending high-relief ridge cutting across the Drake Passage. The SFZ is composed of shallow, ridge segments and depressions, largely parallel to the fracture zone with an `en echelon' pattern in plan view. These features are bounded by tectonic lineaments, interpreted as faults. The axial valley of the spreading center intersects the fracture zone in a complex area of deformation, where N120° E lineaments and E–W faults anastomose on both sides of the intersection. The fracture zone developed within an extensional regime, which facilitated the formation of oceanic transverse ridges parallel to the fracture zone and depressions attributed to pull-apart basins, bounded by normal and strike-slip faults.On the multichannel seismic (MCS) profiles, the igneous crust is well stratified, with numerous discontinuous high-amplitude reflectors and many irregular diffractions at the top, and a thicker layer below. The latter has sparse and weak reflectors, although it locally contains strong, dipping reflections. A bright, slightly undulating reflector observed below the spreading center axial valley at about 0.75 s (twt) depth in the igneous crust is interpreted as an indication of the relict axial magma chamber. Deep, high-amplitude subhorizontal and slightly dipping reflections are observed between 1.8 and 3.2 s (twt) below sea floor, but are preferentially located at about 2.8–3.0 s (twt) depth. Where these reflections are more continuous they may represent the Mohorovicic seismic discontinuity. More locally, short (2–3 km long), very high-amplitude reflections observed at 3.6 and 4.3 s (twt) depth below sea floor are attributed to an interlayered upper mantle transition zone. The MCS profiles also show a pattern of regularly spaced, steep-inclined reflectors, which cut across layers 2 and 3 of the oceanic crust. These reflectors are attributed to deformation under a transpressional regime that developed along the SFZ, shortly after spreading ceased at the WSR. Magnetic anomalies 5 to 5 E may be confidently identified on the flanks of the WSR. Our spreading model assumes slow rates (ca. 10–20 mm/yr), with slight asymmetries favoring the southeastern flank between 5C and 5, and the northwestern flank between 5 and extinction. The spreading rate asymmetry means that accretion was slower during formation of the steeper, shallower, southeastern flank than of the northwestern flank.     

Reference sediment core and paleogeography of the underwater Slupsk river foredelta in the Baltic Sea

Core Psd-590 (length 947 cm, water depth 124 m) penetrated the entire sequence of marine (Littorina) mud (730 cm) and stopped in gray lacustrine (Ancylus) clays with hydrotroilitic films. The Littorina mud is gray-colored, microlaminated in the interval of 730 to 700 cm, and dark gray with hydrotoilitic films and obscure microlamination higher in the section. According to the diatom data, typical marine sediments begin at the level of 620 cm, while the lithological-geochemical data indicate this change at the level of 730 cm. This level is marked by a considerable increase in the concentrations of SiO_2amorph, CO₂, C_org, and Mn in the sediments. In the interval of 730 to 620 cm, diatoms are represented by both freshwater and brackish-water species. The Littorina transgression began in the form of individual flows of saline North Sea waters into the Baltic Sea, which is evident from the microlamination and sharp peaks in the concentrations of the chemical elements. The transgression exhibits two weakening and one strengthening (core interval of 380 to 220 cm) stages; the latter was marked by the maximal water salinity. The post-Littorina mud contains molluscan shells and fish bones and is enriched in the fraction of 0.05–0.01 mm. The microlaminated Littorina mud was deposited during periods with stagnant conditions in the bottom water layer, while the homogenous sediments accumulated during periods of its aeration.     

A detailed magnetic study of the Reykjanes Ridge between 63°00′N and 63°40′N

Immediately southwest of Iceland, the Reykjanes Ridge consists of a series ofen échelon, elongate ridges superposed on an elevated, smooth plateau. We have interpreted a detailed magnetic study of the portion of the Reykjanes Ridge between 63°00N and 63°40N on the Icelandic insular shelf. Because the seafloor is very shallow in our survey area (100–500 m), the surface magnetic survey is equivalent to a high-sensitivity, nearbottom experiment using a deep-towed magnetometer. We have performed two-dimensional inversions of the magnetic data along profiles perpendicular to the volcanic ridges. The inversions, which yield the magnetization distribution responsible for the observed magnetic field, allow us to locate the zones of most recent volcanism and to measure spreading rates accurately. We estimate the average half spreading rate over the last 0.72 m.y. to have been 10 mm/yr within the survey area. The two-dimensional inversions allow us also to measure polarity transition widths, which provide an indirect measure of the width of the zone of crustal accretion. We find a mean transition width on the order of 4.5±1.6 km. The observed range of transition widths (2 to 8.4 km) and their mean value are characteristic of slow-spreading centers, where the locus of crustal accretion may be prone to lateral shifts depending on the availability of magmatic sources. These results suggest that, despite the unique volcanotectonic setting of the Reykjanes Ridge, the scale at which crustal accretion occurs along it may be similar to that at which it occurs along other slow-spreading centers. The polarity transition width measurements suggest a zone of crustal accretion 4–9 km wide. This value is consistent with the observed width of volcanic systems of the Reykjanes Peninsula. The magnetization amplitudes inferred from our inversions are in general agreement with NRM intensity values of dredge samples measured by De Boer (1975) and ourselves. Our thermomagnetic measurements do not support the hypothesis that the low amplitude of magnetic anomalies near Iceland is the result of a high oxidation state of the basalts. We suggest that the observed reduction in magnetic anomaly amplitude toward Iceland may be the result of an increase in the size of pillows and other igneous units.     

Ocean bottom refraction seismograph (OBRS)

This paper describes a pop-up ocean bottom seismograph designed primarily for refraction surveys both on the continental shelf and in deep sea. Its development is the extension of our system based on seismic detectors located on the sea floor with radio transmission of seismic signals and used for seismic refraction studies on the continental shelf. The seismic detectors (vertical geophone or hydrophone and two orthogonally mounted horizontal geophones) are located outside of the pressure vessel on the main frame. Optionally, the seismic sensors may be decoupled from the main frame assembly. This decoupling is performed by a mobile arm positioning the separate three component sensor package on the sea floor.Contribution No. 455 of the Département Scientifique, Centre Océanologique de Bretagne.     

Assessment of dissolved nutrients dispersal derived from offshore fish-farm using nitrogen stable isotope ratios (δ15N) in macroalgal bioassays

In this study, the dispersal of wastes from offshore fish farms was evaluated by analyzing nitrogen stable isotope ratios (δ¹⁵N) in macroalgae incubated in the water column at sites located at an increasing distance from the fish cages. Bioassays were performed at three fish farms situated in separate localities with different nutritional conditions (Canary Islands, Murcia and Catalonia) and varying in size, species of fish reared and annual production. Macroalgal bioassays were carried out in two different directions (DI and DII) and they were replicated at each distance in order to evaluate the effect of small-scale variability on the spatial extent of fish farm wastes. The results obtained with δ¹⁵N contribute to a better understanding of the application of nitrogen stable isotopes ratios in macroalgae as an effective bioindicator for tracing the dispersion of offshore fish farm wastes, and demonstrate that fish farm wastes can be traced even over distances of some km from the pollution source. In the Canary Islands, the maximum distance obtained for detection of fish farm wastes was between 450 and 700 m. Of the three installations studied, Murcia presented the greatest distance for detection of fish farm waste influence, ranging from between 1550 and 2450 m, whilst in Catalonia this distance was less than 120 m. In Catalonia, the results were masked by the influence of other sources of nitrogen, and thus fish farm wastes were detected at more reduced distances than expected. These results confirm that fish farm wastes can be traced using the nitrogen stable isotope ratios of macroalgae and that this method can also be useful for identifying areas of potential risk to some sensitive ecosystems, and as an early signal that changes in the community structure might occur.