Seismic Ground Motion Expected for the Eastern District of Naples

The seismic ground motion of a test area in the eastern district of Naples is computed with a hybrid technique based on the mode summation and the finite difference methods. This technique allows us the realistic modelling of source and propagation effects, including local soil conditions. In the modelling, we consider the 1980 Irpinia earthquake, a good example of strong shaking for the area of Naples, which is located about 90 km from the epicenter.The detailed geological setting is reconstructed from a large number of drillings. The sub-soil is mainly formed by alluvial (ash, stratified sand and peat) and pyroclastic materials overlying a pyroclastic rock (yellow neapolitan tuff), representing the neapolitan bedrock. The detailed information available on mechanical properties of the sub-soil and its geometry warrants the application of the sophisticated hybrid technique.As expected, the sedimentary cover causes an increase of the signal's amplitudes and duration. If thin peat layers are present, the amplification effects are reduced, and the peak ground accelerations are similar to those observed for the bedrock model. This can be explained by the backscattering of wave energy at such layers, that tend to seismically decouple the upper from the lower part of the structure.For SH-waves, the influence of the variations of the S-wave velocities on the spectral amplification is studied, by considering locally measured velocities and values determined from near-by down-hole measurements. The comparison between the computed spectral amplifications confirms the key role of an accurate determination of the seismic velocities of the different layers.The comparison performed between a realistic 2-D seismic response and a standard 1-D response, based on the vertical propagation of waves in a plane layered structure, shows considerable difference, from which it is evident that serious caution must be taken in the modelling of expected ground motion at a specific site.     

Numerical simulation of undersea cable dynamics

A fully three-dimensional code has been written to compute the motion of a towed cable. The code is based on a robust and stable finite difference approximation to the differential equations derived from basic dynamics. A 3500-ft (1.07 km) cable pulled at 18.5 knots (34.3 km hr⁻¹) through a circular turn of 700 yd (0.64 km) radius has been computed in about half of the real time of the maneuver. The computed displacements are close to the measured ones; the changes in depth are within 2%.     

Anomalous luminescence of subglacial sediment at Haut Glacier d'Arolla,Switzerland – a consequence of resetting at the glacier bed?

Swift, D. A., Sanderson, D. C. W., Nienow, P. W., Bingham, R. G. & Cochrane, I. C. 2010: Anomalous luminescence of subglacial sediment at Haut Glacier d'Arolla, Switzerland – a consequence of resetting at the glacier bed? Boreas, Vol. 40, pp. 446–458. 10.1111/j.1502‐3885.2010.00196.x. ISSN 0300‐9483. Luminescence has the potential to elucidate glacial geomorphic processes because primary glacial sediment sources and transport pathways are associated with contrasting degrees of exposure to light. Most notably, sediment entrained from extraglacial sources should be at least partially reset, whereas sediment produced by glacial erosion of subglacial bedrock should retain substantial luminescence commensurate with a geological irradiation history. We set out to test the validity of this assumption at Haut Glacier d'Arolla, Switzerland using sediment sampled extraglacially and from the glacier bed. Contrary to our expectations, the subglacial samples exhibited natural signals that were substantially lower than those of other sample groups, and further (albeit limited) analyses have indicated no obvious differences in sample‐group luminescence characteristics or behaviour that could account for this observation. For glaciological reasons, we can eliminate the possibilities that the subglacial sediment has been extraglacially reset or exposed in situ to heat or light. We therefore advocate investigation of possible resetting processes related to subglacial crushing and grinding, and speculate that such processes, if more generally present, may enable the dating of subglacially deposited tills using luminescence‐based techniques.     

Space-time interaction amongst clusters of mining induced seismicity

Elementary cluster analysis of induced seismicity in a South African gold mine has shown that there is a clear interaction amongst the clusters; and that the level of the interaction is a function of the distance. The clusering algorithm used is an adaptation of the single-link cluster analysis which considers both three-dimensional space and time. A high level of interaction between the clusters is demonstrated from the cross-correlation analysis of seismic activity rates and radiated energy. A distinct decrease in the value of correlation coefficients was detectable as distance increased. This was somewhat surprising, considering the simplicity of the technique used. Since no attempt is made to study the physical mechanisms of interaction, these results are very preliminary, but interesting from an observational point of view.     

The use of acidimetric titration as a novel approach to study particulate trace metal speciation and mobility: Application to sediments of the Scheldt estuary

The study of trace metal speciation has benefited from a great deal of interest leading to the development and the diversification of sequential extraction schemes (SES), which triggered the need for harmonization by the standard, measurements and testing programme (SM & T). However, some uncertainties still persist in the application of the harmonized 3-step protocol, because of the difficulty in conceptualizing a technique that can be applied to environmental samples irrespective of their nature. The alternative method proposed in this study is based on the solubility of the sample components progressively dissolved during the course of an acidimetric titration by 1 mol L⁻¹ HCl. The major HCl-reactive mineralogical components are identified using mass balance calculation of H⁺ consumed by their dissolution together with the amount of major elements released into solution. The speciation of minor and trace elements is investigated by comparing their titrations to those of the major elements. This approach is much simpler than SES because it uses simple non-selective H⁺ at room temperature instead of a complex experimental design of so-called specific reagents. The different mineral components of the solid are no longer operationally defined and the problem of selectivity is irrelevant to the titration approach. The method was applied to several sediment samples from the Scheldt estuary and the particulate phase was further examined by Scanning Electron Microprobe and X-ray Diffraction techniques. The nearly complete consumption of H⁺ in the suspension is balanced by the total dissolution of carbonates and Fe-oxyhydroxides. In contrast to the speciation inferred from the Tessier SES, the acidimetric titration has demonstrated that the carbonate phase does not significantly contain trace metals with the exceptions of 40% of the Mn and 30% of the Co. In contrast, the Fe-oxyhydroxides seem to play a major role and account for 70% of Pb and 20% of Cr, in addition to 60% of P and additional amounts of 20% Co and 40% Mn. 70% of the Cu also occur in the oxyhydroxide phase, more likely coprecipitated with gibbsite. 90% of the Cd and 85% of Zn can be attributed to the Acid Volatile Sulfide (AVS) phase as evidenced from S titration. The acidimetric titration method not only provides information on the speciation of trace metals but also allows the quantification of their reactivity and mobility, if one considers that the titration roughly mimics pH changes that may occur as a result of chemical disequilibrium in the environment. The results demonstrate the potential of the acidimetric titration as an alternative to SES protocols in geochemical and environmental regulation studies. This method is applicable to a wide variety of environmental materials with little or minor adjustments.     

Chemical signature of intermediate water masses along western Portuguese margin

Although the circulation of intermediate water masses in the eastern North Atlantic remains poorly defined, the presence of fresher intermediate waters, the Sub-Artic (SAIW) and the Antarctic Intermediate Water (AAIW), as well the saline intermediate Mediterranean Water (MW), has been tracked using biogeochemical properties. Here we assess the hydrographic and chemical structures of intermediate waters along the western Portuguese margin by examining the vertical distributions and property-property plots of chemical tracers (oxygen and nutrients). AAIW was traced by low oxygen and high nutrients, while SAIW was recognized by low nutrients. The Mediterranean Water (MW) undercurrent is shown to spread towards the eastern flank of Gorringe bank. Concurrently, the fresher waters gained salt by direct incorporation of MW, while this water was enriched in nutrients on its way northward and westward owing, to a great extent, to the entrainment of an AAIW branch. The distributions of nutrients and apparent oxygen utilization are discussed in terms of regional ocean circulation. Our analysis suggests a circulation pattern of the various intermediate waters along the western Portuguese margin: MW extends all over the area, but its presence is more pronounced around cape St. Vincent; SAIW apparently moves southward, reaching the Gorringe bank region, and AAIW flows northward along the coast and around the bank.     

Impact of Earth radiation pressure on GPS position estimates

GPS satellite orbits available from the International GNSS Service (IGS) show a consistent radial bias of up to several cm and a particular pattern in the Satellite Laser Ranging (SLR) residuals, which are suggested to be related to radiation pressure mismodeling. In addition, orbit-related frequencies were identified in geodetic time series such as apparent geocenter motion and station displacements derived from GPS tracking data. A potential solution to these discrepancies is the inclusion of Earth radiation pressure (visible and infrared) modeling in the orbit determination process. This is currently not yet considered by all analysis centers contributing to the IGS final orbits. The acceleration, accounting for Earth radiation and satellite models, is introduced in this paper in the computation of a global GPS network (around 200 IGS sites) adopting the analysis strategies from the Center for Orbit Determination in Europe (CODE). Two solutions covering 9 years (2000–2008) with and without Earth radiation pressure were computed and form the basis for this study. In previous studies, it has been shown that Earth radiation pressure has a non-negligible effect on the GPS orbits, mainly in the radial component. In this paper, the effect on the along-track and cross-track components is studied in more detail. Also in this paper, it is shown that Earth radiation pressure leads to a change in the estimates of GPS ground station positions, which is systematic over large regions of the Earth. This observed “deformation” of the Earth is towards North–South and with large scale patterns that repeat six times per GPS draconitic year (350 days), reaching a magnitude of up to 1 mm. The impact of Earth radiation pressure on the geocenter and length of day estimates was also investigated, but the effect is found to be less significant as compared to the orbits and position estimates.     

E (B-V) determination from an UV-visual two-colour diagram: O and B stars in the catalogue of stellar ultraviolet fluxes

We present here, for the O and B type stars in the Catalogue of Stellar Ultraviolet Fluxes, an approach which does not require a precise knowledge of spectral type and luminosity class for derivingE(B-V) colour excesses. The method is based on the use of an UV-visual two-colour diagram; galactic variations in the interstellar extinction law are analyzed and fully taken into account. Our results have been compared with those derived by using the differences between observed and intrinsic colours for stars with known spectral classification. The very good agreement in a large number of cases (94 per cent) demonstrates that our approach permits the derivation of reliable colour excess values for early type stars even if only a rough spectral classification is available.     

Impacts of primary deforestation upon limestone slopes in northern Vancouver Island, British Columbia

Effects of deforestation upon slopes in limestones and in volcanic rocks in the Benson River valley, northern Vancouver Island, have been investigated quantitatively. Postlogging soil erosion and vegetal regeneration success were assessed by measuring soil depth, percent bare rock and moss cover, and the numbers and diversity of trees, shrubs, and plants on 25 sampling sites, each containing ten measuring quadrats selected at random. Sixteen sites were on the Quatsino Formation, a well-karstified limestone, and nine on the Karmutsen Formation of basaltic lavas. Eight sites were of virgin forest, 16 were logged between 1970 and 1983, and one (on limestone) was logged in 1911. Both bedrock types were significantly affected by the cutting. There was greater loss of soil and an increase in bare rock on the limestones. Erosion was increased significantly by burning on the limestones but not on the volcanics. Within-group comparisons on the limestones determined that steeper slopes and harder burned areas suffered the most and are slowest to regenerate. Volume of timber on the 1911 site was 19 percent of that in similar uncut forest sites. It appears that complete recovery on the barren limestone slopes will require at least some centuries.