Supply limited sediment transport in a high-discharge event of the tropical Burdekin River, North Queensland, Australia

Interactions between catchment variables and sediment transport processes in rivers are complex, and sediment transport behaviour during high‐flow events is not well documented. This paper presents an investigation into sediment transport processes in a short‐duration, high‐discharge event in the Burdekin River, a large sand‐ and gravel‐bed river in the monsoon‐ and cyclone‐influenced, semi‐arid tropics of north Queensland. The Burdekin's discharge is highly variable and strongly seasonal, with a recorded maximum of 40 400 m³ s^?1. Sediment was sampled systematically across an 800 m wide, 12 m deep and straight reach using Helley‐Smith bedload and US P‐61 suspended sediment samplers over 16 days of a 29‐day discharge event in February and March 2000 (peak 11 155 m³ s^?1). About 3·7 × 10⁶ tonnes of suspended sediment and 3 × 10⁵ tonnes of bedload are estimated to have been transported past the sample site during the flow event. The sediment load was predominantly supply limited. Wash load included clay, silt and very fine sand. The concentration of suspended bed material (including very coarse sand) varied with bedload transport rate, discharge and height above the bed. Bedload transport rate and changes in channel shape were greatest several days after peak discharge. Comparison between these data and sparse published data from other events on this river shows that the control on sediment load varies between supply limited and hydraulically limited transport, and that antecedent weather is an important control on suspended sediment concentration. Neither the empirical relationships widely used to estimate suspended sediment concentrations and bedload (e.g. Ackers & White, 1973) nor observations of sediment transport characteristics in ephemeral streams (e.g. Reid & Frostick, 1987) are directly applicable to this river.     

Collisional processes in the eastern Mediterranean

In the eastern Mediterranean the collision of the Erastosthenes and the Anaximander Seamounts with the Cyprus arc results in a unique tectonic setting due to the small size of the eastern Mediterranean basin. As a result of the collision, some of the motion between the African plate and the Eurasian plate is taking place by thrust faulting along the north African passive margin. It seems that the stress at the plate boundary along the Cyprus arc may be transmitted southward to cause the reactivation of a pre-existing fault zone along the passive margin of eastern north Africa.

---

Zusammenfassung Im östlichen Mittelmeerbecken hat die Kollision des Erastosthenes und des Anaximander Seamounts mit dem Cypern-Bogen eine spezielle tektonische Situation geschaffen, die durch den engen Raum dieses Beckens bestimmt wird. Als Ergebnis dieser Kollision erscheinen Überschiebungen der Afrikanischen Platte auf Eurasische Platte entlang des passiven nordafrikanischen Randes. Es erscheint möglich, daß das Streßfeld an der Plattengrenze entlang des Zypernbogens südwärts wirkt und dadurch die alte Störungszone entlang des passiven Kontinentrandes von Nordafrika reaktiert wird.

---

Résumé En Méditerrannée orientale, la collision des guyots Eratosthène et Anaximandre avec l'arc de Chypre a engendré une situation tectonique particulière, due à la faible dimension du bassin est-méditerrannéen. Cette collision a eu pour conséquence la production de charriages de la plaque africaine sur la plaque eurasiatique le long de la marge passive nord-africaine. Il semble que les contraintes règnant au bord de la plaque le long de l'arc de Chypre se soient transmises vers le Sud pour y provoquer la réactivation d'une zône failleuse préexistante le long de la marge passive du NE de l'Afrique.

---

, . . , . . .

     

Modeling Local Tidal Constituents Using TOPEX/POSEIDON SSH for the Malaysian Marine Region

A new Local Ocean Tide Model, has been produced for the Exclusive Economic Zone (EEZ) of Malaysia, which incorporates some of the latest TOPEX/POSEIDON data for the years 1992 to 1998. Local tide gauge data are used as a comparison, along with another leading Global Ocean Tide Model, Ori96. The leading diurnal and semidiurnal constituents M₂, S₂, N₂, K₁, O₁, P₁ and Q₁ are reproduced using TOPEX/POSEIDON Sea Surface Heights (SSH) in a response analysis type least squares derivation following Munk and Cartwright (1966).     

Electrical resistivity imaging and hydrochemical analysis for groundwater investigation in Kuala Langat,Malaysia

ABSTRACT

Integrated two-dimensional electrical resistivity imaging (ERI) and hydrochemical surveys were used to investigate the groundwater alluvial aquifer in Kuala Langat, Malaysia. The study in the Langat basin considered the thickness of the aquifer, the depth of the bedrock, the regions influenced by seawater intrusion, and the monitoring of water levels. The resistivity imaging results show that the upper layer consists of clay, while the second layer is an aquifer whose thickness varies mostly in the range of 10–30 m, and in some cases extends to 40 m. The bedrock depth varies from 30 to 65 m. The chemical analyses were carried out on groundwater samples from nine boreholes collected between 2008 and 2012. The analyses indicate that the total dissolved solids (TDS) exceed 1000 mg L^-1 near the coastal area and are often less than 500 mg L^-1 further inland. The ERI and hydrochemical analyses reveal that groundwater in the study area, especially towards the coast, is a mixture of brackish and fresh waters.

EDITOR D. Koutsoyiannis; ASSOCIATE EDITOR M.D. Fidelibus     

Mammal remains at Rantis Cave,Israel, and Middle–Late Pleistocene human subsistence and ecology in the Southern Levant

Rantis Cave is a recently discovered filled cave in central Israel, displaying a rich faunal accumulation of micromammals, ungulates and carnivores. U–Th dating assigns the beginning of accumulation to ca. 140 ka. The accumulation is culturally assigned to the late half of the Middle Paleolithic (MP) period. Single‐grain optically stimulated luminescence measurements attest to a complex sedimentological history. We present the cross‐disciplinary results of taphonomic and geomorphological analyses, which point to the cave serving as a natural pitfall trap for the large fauna, with little human or carnivore activity. The fauna is dominated by Dama among the ungulates and by Microtus among the micromammals. These data in conjunction with ungulate tooth mesowear analysis suggest a xeric Mediterranean environment on the eastern margin of the southern Levantine foothills. The relative taxonomic abundance of ungulate taxa shows some differences from anthropogenic MP sites, possibly reflecting the prey choice patterns of MP hunters. Overall, the natural accumulation scenario for Rantis Cave provides a rare paleoenvironmental and paleoeconomic reference to the rich anthropogenic MP faunas of the Southern Levant, enabling the reconstruction of a rich and diverse environmental setting for this important human dispersal route. Copyright © 2011 John Wiley & Sons, Ltd.     

A 100 ka record of fluvial activity in the Fitzroy River Basin,tropical northeastern Australia

This study reports the nature and timing of Quaternary fluvial activity in the Fitzroy River basin, which drains a diverse 143,000 km² area in northeastern Queensland, before discharging into the Great Barrier Reef Marine Park. The catchment consists of an extensive array of channel and floodplain types that we show have undergone large-scale fluvial adjustment in-channel planform, geometry and sinuosity. Optically stimulated luminescence (OSL) dating of quartz sediments from fifteen (3–18 m) floodplain cores throughout the basin indicates several discrete phases of active bedload activity: at ～105–85 ka in Marine Isotope Stage (MIS) 5, at ～50–40 ka (MIS 3), and at ～30–10 ka (MIS 3/2). The overall timing of late Quaternary fluvial activity correlates well with previous accounts from across Australia with rivers being primarily active during interstadials. Fluvial activity, however, does not appear to have been synchronous throughout the basin’s major sub-catchments. Fluvial activity throughout MIS 2 (i.e. across the Last Glacial Maximum) in the meandering channels of the Fitzroy correlates well with regional data in tropical northeastern Queensland, and casts new light on the river response to reduced rainfall and vegetation cover suggested by regional palaeoclimate indicators. Moreover, the absence of a strong Holocene signal is at odds with previous accounts from elsewhere throughout Australia. The latitudinal position of the Fitzroy across the Tropic of Capricorn places this catchment at a key location for elucidating the main hydrological drivers of Quaternary fluvial activity in northeastern Australia, and especially for determining tropical moisture sources feeding into the headwaters of Cooper Creek, a major river system of the continental interior.     

Ionic liquid as a medium to remove iron and other metal ions: a case study of the North Kelantan Aquifer,Malaysia

An alternative iron removal treatment method using liquid-liquid extraction with the room-temperature ionic liquid, 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide, as a solvent medium was studied. The chelating agent 1,10-phenanthroline was used as the extractant. The extraction of Fe(III) and Fe(II) was influenced significantly by the pH of the aqueous phase. The successful removal of iron was achieved; more than 95 % of the initial iron concentration was removed from the groundwater samples. However, detailed research is needed before the ionic liquid method can replace the conventional groundwater treatment protocol because the recovery rate was very low upon reuse (approximately 25–60 %). This low recovery was due to the ion exchange process; the appearance of anions from ionic liquids was also detected in groundwater samples.     

Composition of selected heavy metals in road dust from Kuala Lumpur city centre

This study was carried out in order to determine the concentration of heavy metals, e.g., lead (Pb), cadmium (Cd), copper (Cu), zinc (Zn), iron (Fe), manganese (Mn), nickel (Ni) and chromium (Cr) in road dust in Kuala Lumpur’s city centre. Samples were collected from four sampling locations, each of which had four sampling points and three replications. Heavy metals from different fractions of particles separated by different diameter sizes: d < 63 μm (Fraction A), 63 < d < 125 μm (Fraction B) and 125 < d < 250 μm (Fraction C) were analyzed using inductively coupled plasma mass spectrometry. The results from this study showed that concentration of heavy metals was dominated by the smallest particle size: <63 μm and that Fe was the most abundant heavy metal overall, followed by Cu > Mn > Zn > Pb > Ni > Cr > Cd. The fact that Cd had the highest enrichment factor value (EF) for all particle sizes indicates that anthropogenic activities contributed to the presence of this metal. There was also a higher EF value for heavy metals in small particle (Fraction A), compared to Fraction B and C, which suggests that fine particles were being produced through anthropogenic activities. Cluster analysis and principal component analysis demonstrated the likelihood of the heavy metals detected in the road dust, originating from road traffic and industrial activities.     

Adaptive state estimation of groundwater contaminant boundary input flux in a 2-dimensional aquifer

In many circumstances involving heat and mass transfer issues, it is considered impractical to measure the input flux and the resulting state distribution in the domain. Therefore, the need to develop techniques to provide solutions for such problems and estimate the inverse mass flux becomes imperative. Adaptive state estimator (ASE) is increasingly becoming a popular inverse estimation technique which resolves inverse problems by incorporating the semi-Markovian concept into a Bayesian estimation technique, thereby developing an inverse input and state estimator consisting of a bank of parallel adaptively weighted Kalman filters. The ASE is particularly designed for a system that encompasses independent unknowns and /or random switching of input and measurement biases. The present study describes the scheme to estimate the groundwater input contaminant flux and its transient distribution in a conjectural two-dimensional aquifer by means of ASE, which in particular is because of its unique ability to efficiently handle the process noise giving an estimation of keeping the relative error range within 10% in 2-dimensional problems. Numerical simulation results show that the proposed estimator presents decent estimation performance for both smoothly and abruptly varying input flux scenarios. Results also show that ASE enjoys a better estimation performance than its competitor, Recursive Least Square Estimator (RLSE) due to its larger error tolerance in greater process noise regimes. ASE’s inherent deficiency of being slower than the RLSE, resulting from the complexity of algorithm, was also noticed. The chosen input scenarios are tested to calculate the effect of input area and both estimators show improved results with an increase in input flux area especially as sensors are moved closer to the assumed input location.     

The Tertiary： a proposal for its formal definition

The term Tertiary, subdivided into the Paleogene and Neogene, is traditionally used to represent the interval of geological time between the Cretaceous and Quaternary. In the 1990s, however, the Neogene and Paleogene were ratified by the International Union of Geological Sciences as periods/systems of the Cenozoic Era/Erathem, leaving the Tertiary officially undefined. The Tertiary nonetheless remains a formal term that has never been officially eliminated, and its widespread use today implies a long future.