Flood risk perception and its determinants among rural households in two communities in Khyber Pakhtunkhwa,Pakistan

Natural Hazards - Risk perception plays a vital part in flood risk management and mitigation strategies. Therefore, this study aims at first to measure the risk perception of the vulnerable...     

Leaching capabilities of iodine monochloride (ICl) and diethylenetriamine pentaacetic acid (DPTA) at different concentrations and pH for some major and trace metals from coal and coal fly ash

In the present study, coal from Chakwal (Pakistan) was leached with an aqueous solutions of iodine monochloride (ICl) and diethylenetriamine pentaacetic acid (DPTA) of different concentrations. The effect of stirring time, concentration and pH was studied on the leaching of different metals from coal. The physicochemical parameters indicated that the coal was of reasonably good quality. The results indicated that with increase in time duration, the extraction of metals increased. In most of the cases, metal concentration increased in the leachate with increasing the concentration of the leaching agents. DPTA was found to be the best leaching agent for most of the metals. Higher extraction of metals from coal fly ash indicated that coal organic matter has a pronounced effect on the leaching. Higher concentration of metals was extracted from virgin coal and coal fly ash at low pH (p?>?0.00) as compared to high pH. DPTA extracted metals in higher concentration from virgin coal and coal fly ash at low pH as compared to ICl. Based on the present study, the most leached metals were Fe, Cu, Mn and the least were Pb, Ni, Cd and Cr.     

Zircon U-Pb geochronology and geochemistry of Late Devonian–Carboniferous granitoids in NW Iran: implications for the opening of Paleo-Tethys

ABSTRACT

We present zircon U-Pb crystallization ages combined with bulk rock major and trace element geochemistry and Sr-Nd-Pb and zircon in-situ Hf isotopic compositions of the Amand and Moro granitoid intrusions in northwest Iran. The Amand and Moro plutons include granite and syeno-diorite with LA-ICP-MS U-Pb zircon ages of 367 ± 6.8 Ma and 351 ± 1.3 Ma, respectively, representative of Late Devonian-Early Carboniferous magmatic activity in NW Iran. Geochemical characteristics such as typical enrichments in alkalis, Nb, Zr, Ga and Y, depletion in P and Sr and fractionated REE patterns with high Ga/Al ratios and Eu negative anomalies are consistent with A-type magmatic signatures. The granitoids are classified as A₂-type and within-plate granitoids. The bulk rock geochemistry (enrichments in Th, Nb and, high Th/Yb, Zr/Y ratios) along with low variation of ¹⁴³Nd/¹⁴⁴Nd_(i) and ⁸⁷Sr/⁸⁶Sr_(i) ratios and positive zircon εHf_(t) support the role of a mantle plume component for the evolution of the Amand and Moro A-type granitoids in an extensional tectonic environment. In fitting with wider regional knowledge, this magmatism occurred during Paleo-Tethys opening in northern Gondwana.     

The utility of cluster analysis in determining sedimentary facies

Data on 12 variables in 98 thin sections from 150 carbonate core samples of the Mauddud Formation (early Middle Cretaceous) in 13 well locations distributed throughout the Greater Burgan Oil Field, Kuwait, are re-examined using two correlation coefficients, distance similarity and product-moment, for data comparison and the weighted-pair group clustering technique with simple arithmatic averages for clustering of coefficients. The analysis shows results compatible with those obtained with subjective appraisal of the same data. The method can be utilized for sedimentary microfacies recognition and can be profitably applied in frontier areas where data are limited.     

地貌特征对约旦南部阿尔阿加河(WadiAl-Arja)流域产沙影响分析(英文)

This study addresses the morphometric variables that determine the sediment yield in Wadi Al-Arja through the analysis of the impact of different morphometric characteristics along the course of the valley on its sediment yield, as well as the analysis of spatial and formal dimensions and morphologies of the basin and its relationship to the sediment yield. The study also addresses the size of variation in the volume of sediment yield of the river tributaries that make up the water network of the valley under the differences of its morphometric and hydrological characteristics. The study found several results, most notably: The classification of Wadi Al-Arja basin according to the hypsometric integral value(72.1%) within an uneven topography, which increases the force of the erosive activity and the size of the sediment yield if the basin was exposed to moist climatic periods. The study also showed the presence of convergence in the intra-spaces between the river tributaries in the water network. This increases the volume of water flows when these tributaries meet with each other and thus increasing their erosive ability and sediment yield. The study also showed the presence of marked variation in the sediment yield of the river tributaries depending on the differences in its morphometric characteristics. The results of the step-wise regression analysis confirmed the importance of the morphometric and hydrological variables, and plant coverage in interpreting the variation in the size of the sediment yield of the river tributaries of different stream order in Wadi Al-Arja basin, where these variables interpreted 43% of the total variation, with statistical significance less than 0.05.     

Assessment of sediment yield estimations for large watershed areas: a case study for the Seyhan,Demirköprü and Hirfanlı reservoirs in Turkey

Abstract

Analyses of data from reservoir surveys and sediment rating curves are compared to predict sediment yield in three large reservoir watershed areas in Turkey. Sediment yield data were derived from reservoir sedimentation rates and suspended sediment measurements at gauging stations. The survey data were analysed to provide the volume estimates of sediment, the time-averaged sediment deposition rates, the long-term average annual loss rates in the reservoir storage capacity, and the long-term sediment yield of the corresponding watershed areas. Four regression methods, including linear and nonlinear cases, were applied to rating curves obtained from gauging stations. Application of the efficiency test to a power function form of a rating curve with nonlinear regression yielded the highest efficiency values. Based on the analysis of the sediment rating curves, sediment load fluxes were calculated by using average daily discharge data at each gauging station. Comparison of these two sediment yield values for each reservoir showed that the sediment yields from the suspended sediment measurements, SY_GS, are 0.99 to 3.54 times less than those obtained from the reservoir surveys, SY_RS. The results from the reservoir surveys indicate that all three reservoirs investigated have lost significant storage capacity due to high sedimentation rates.     

Estimation of ship velocities from MODIS and OCM

Detection of ships and their tracks in the atmosphere from satellites was earlier demonstrated by Porch, Noone, and Kaufman, among others. In this letter, we have gone one step further to estimate the ship speed and direction by locating them and their tracks from multisatellite imagery. Exhausts from the ships create streaks of clouds in the atmosphere that help identify the same ship from two satellites. Ship velocities are estimated from displacements of ships. We have used optical sensors data from Moderate Resolution Imaging Spectroradiometer (MODIS) and Ocean Color Monitor (OCM) to demonstrate this technique. Estimated velocities of ships are within the expected range. Application of this approach has general interest to the navy, coast guards, shipping corporations, commercial ship owners, and fishermen. More satellite observations can be used to continuously monitor the ship velocities.     

A new empirical estimator of coseismic landslide displacement for Zagros Mountain region (Iran)

Earthquake-induced landslides are responsible worldwide for significant socioeconomic losses and historically have a prominent position in the list of natural hazards affecting the Iran plateau. As a step toward the development of tools for the assessment and the management of this kind of hazard at regional scale, an empirical estimator of coseismic displacements along potential sliding surfaces was obtained through a regression analysis for the Zagros region, a mountainous Iranian region subjected to earthquake-induced landslides. This estimator, based on the Newmark’s model, allows to evaluate the expected permanent displacement (named “Newmark displacement”) induced by seismic shaking of defined energy on potential sliding surface characterized by a given critical acceleration. To produce regression models for Newmark displacement estimators, a data set was constructed for different critical acceleration values on the basis of 108 accelerometric recordings from 80 Iranian earthquakes with moment magnitudes between 3.6 and 7. The empirical estimator has a general form, proposed by Jibson (Eng Geol 91:209–218, 2007), relating Newmark displacement to Arias intensity (as parameter representing the energy of the seismic forces) and to critical acceleration (as parameter representing the dynamic shear resistance of the sliding mass). As an example of application, this relation was employed to provide a basic document for earthquake-induced landslide hazard assessment at regional scale, according to a method proposed by Del Gaudio et al. (Bull Seismol Soc Am 93:557–569, 2003), applied to the whole Iranian territory, including Zagros region. This method consists in evaluating the shear resistance required to slopes to limit the occurrence of seismically induced failures, on the basis of the Newmark’s model. The obtained results show that the exposure to landslide seismic induction is maximum in the Alborz Mountains region, where critical accelerations up to ~0.1 g are required to limit the probability of seismic triggering of coherent type landslides within 10% in 50 years.