Range imaging: a new method for high‐resolution topographic measurements in small‐ and medium‐scale field sites

Topographic measurements are essential for the study of earth surface processes. Three‐dimensional data have been conventionally obtained through terrestrial laser scanning or photogrammetric methods. However, particularly in steep and rough terrain, high‐resolution field measurements remain challenging and often require new creative approaches. In this paper, range imaging is evaluated as an alternative method for obtaining surface data in such complex environments. Range imaging is an emerging time‐of‐flight technology, using phase shift measurements on a multi‐pixel sensor to generate a distance image of a surface. Its suitability for field measurements has yet not been tested. We found ambient light and surface reflectivity to be the main factors affecting error in distance measurements. Low‐reflectivity surfaces and strong illumination contrasts under direct exposure to sunlight lead to noisy distance measurements. However, regardless of lighting conditions, the accuracy of range imaging was markedly improved by averaging multiple images of the same scene. For medium ambient lighting (shade) and a light‐coloured surface the measurement uncertainty was approximately 9 mm. To further test the suitability of range imaging for field applications we measured a reach of a steep mountain stream with a horizontal resolution of approximately 1 cm (in the focal plane of the camera), allowing for the interpolation of a digital elevation model on a 2 cm grid. Comparison with an elevation model obtained from terrestrial laser scanning for the same site revealed that both models show similar degrees of topographic detail. Despite limitations in measurement range and accuracy, particularly at bright ambient lighting, range imaging offers three‐dimensional data in real time and video mode without the need of post‐processing. Therefore, range imaging is a useful complement or alternative to existing methods for high‐resolution measurements in small‐ to medium‐scale field sites. Copyright © 2012 John Wiley & Sons, Ltd.     

Effects of substratum type on fish assemblages in shallow areas of a tropical estuary

While there is already a comprehensive understanding of the effects of environmental variables, such as dissolved oxygen, temperature and salinity, on the structure, biomass and metabolism of aquatic biota in estuarine habitats, the effect of sedimentation, a harmful underlying factor, remains unclear. The aim of this study was to assess the differences in fish assemblages along the freshwater to salt water gradient of a large tropical estuary, and to evaluate the effects on them of habitat disturbance associated with shallow water sedimentation in the intertidal areas. Fish and environmental variables were recorded in the upper, middle and lower salinity zones of the estuary at ebb tide in both the dry and wet seasons. Sediment samples associated with different levels of habitat disturbance were analysed using granulometry, and their organic content and dissolved oxygen levels were quantified. Water temperature, salinity, pH and dissolved oxygen levels were also measured. Habitat disturbance was found to be correlated with the density, biomass and richness of fish assemblages. A total of 77 species were recorded, forming two distinct fish assemblages, with the Eleotridae family dominating in the upper zone, and Gerreidae, Gobiidae and Tetraodontidae the most common in the middle and lower estuary. Changes in the structure of fish assemblages, including reductions in density, biomass and richness, were associated with disturbance to natural features, where muddy sediment was replaced by sandy sediment and the quantity of organic matter fell. Atherinella brasiliensis was the species which showed a preference for the disturbed areas in the middle and lower zones, while Dormitator maculatus showed a preference for them in the upper estuary. They may be taken as indicators of habitat disturbance due to shallow sedimentation.     

Granitic coastal geomorphology: applying integrated terrestrial and bathymetric LiDAR with multibeam sonar to examine coastal landscape evolution

Coasts composed of resistant lithologies such as granite are generally highly resistant to erosion. They tend to evolve over multiple sea level cycles with highstands acting to remove subaerially weathered material. This often results in a landscape dominated by plunging cliffs with shore platforms rarely occurring. The long‐term evolution of these landforms means that throughout the Quaternary these coasts have been variably exposed to different sea level elevations which means erosion may have been concentrated at different elevations from today. Investigations of the submarine landscape of granitic coasts have however been hindered by an inability to accurately image the nearshore morphology. Only with the advent of multibeam sonar and aerial laser surveying can topographic data now be seamlessly collected from above and below sea level. This study tests the utility of these techniques and finds that very accurate measurements can be made of the nearshore thereby allowing researchers to study the submarine profile with the same accuracy as the subaerial profile. From a combination of terrestrial and marine LiDAR data with multibeam sonar data, it is found that the morphology of granite domes is virtually unaffected by erosion at sea level. It appears that evolution of these landscapes on the coast is a very slow process with modern sea level acting only to remove subaerially weathered debris. The size and orientation of the joints determines the erosional potential of the granite. Where joints are densely spaced (<2 m apart) or the bedrock is highly weathered can semi‐horizontal surfaces form. Copyright © 2014 John Wiley & Sons, Ltd.     

Phytoliths as indicators of pedogenesis and paleoenvironmental changes in the Brazilian cerrado

This paper presents the preliminary results of phytolith analyses of a peat located in the cerrado of the Uberaba municipality, State of Minas Gerais, Brazil. The phytolith soil sequence is discussed by comparison with phytolith assemblages extracted from dominant plants (Cyperaceae and Poaceae). Increasing mean age of phytolith assemblages with depth is assumed. Poaceae Cuneiform bulliform cell, Parallelepiped bulliform cell and Elongate smooth long cell types dominate up to 80 cm, rapidly drop to 42% at 80 cm and regularly decrease from 42% to 2% upwards. Cyperaceae Rondel concave type shows the inverse trend, being dominant in the upper part of the profile. This pattern can be assigned to increasing selective dissolution of the Cyperaceae phytolith type with depth, or/and to a decrease of water stress suffered by the grasses, leading to a decrease of bulliform cell silicification. Soil processes and paleo-environmental changes hypotheses are discussed.     

Defining the Potential of Nanoscale Re‐Os Isotope Systematics Using Atom Probe Microscopy

Atom probe microscopy (APM) is a relatively new in situ tool for measuring isotope fractions from nanoscale volumes (< 0.01 μm³). We calculate the theoretical detectable difference of an isotope ratio measurement result from APM using counting statistics of a hypothetical data set to be ± 4δ or 0.4% (2s). However, challenges associated with APM measurements (e.g., peak ranging, hydride formation and isobaric interferences), result in larger uncertainties if not properly accounted for. We evaluate these factors for Re‐Os isotope ratio measurements by comparing APM and negative thermal ionisation mass spectrometry (N‐TIMS) measurement results of pure Os, pure Re, and two synthetic Re‐Os‐bearing alloys from Schwander et al. (2015, Meteoritics and Planetary Science, 50, 893) [the original metal alloy (HSE) and alloys produced by heating HSE within silicate liquid (SYN)]. From this, we propose a current best practice for APM Re‐Os isotope ratio measurements. Using this refined approach, mean APM and N‐TIMS ¹⁸⁷Os/¹⁸⁹Os measurement results agree within 0.05% and 2s (pure Os), 0.6–2% and 2s (SYN) and 5–10% (HSE). The good agreement of N‐TIMS and APM ¹⁸⁷Os/¹⁸⁹Os measurements confirms that APM can extract robust isotope ratios. Therefore, this approach permits nanoscale isotope measurements of Os‐bearing alloys using the Re‐Os geochronometer that could not be measured by conventional measurement principles.     

Numerical simulation of percussive drilling

This paper presents a novel dynamical model to analyze the long‐term response of a percussive drilling system. This departs from existing approaches that usually consider a single activation and bit/rock interaction cycle for the analysis of the process performance. The proposed model integrates the axial dynamics of an elastic piston and an elastic drill bit, a motion‐dependent pressure law to drive the piston, and a generalized bit/rock interaction law representative of the dynamic indentation taking place at the bit/rock interface. It applies to down‐the‐hole percussive drilling as well as top‐hole, with minor modifications. The model does not account for the angular motion or the hole cleaning, however. The model is first formulated mathematically; then, a finite‐dimensional approximation is proposed for computations. Numerical analyses of the model response, for a low‐size down‐the‐hole percussive system, follow. The period‐1 stationary response for the reference configuration is studied in detail, and parametric analyses assessing the influence on the rate of penetration of the bit/rock interaction parameters, the feed force, and the percussive activation parameters are conducted. These analyses reveal that the multiscale nature of the process is well captured by the model and recover expected trends for the influence of the parameters. They also suggest that a significant increase of the penetration rate can be achieved by increasing the percussive frequency. Copyright © 2015 John Wiley & Sons, Ltd.     

Magnetic fabrics and rock magnetism of Proterozoic dike swarm from the southern São Francisco Craton, Minas Gerais State, Brazil

Magnetic fabric and rock magnetism studies were performed on 32 mafic dikes of a Proterozoic dike swarm from the southern São Francisco Craton (SFC; Minas Gerais State, SE Brazil). Magnetic anisotropies were determined by applying anisotropy of low-field magnetic susceptibility (AMS) and anisotropy of remanent magnetization (ARM). The latter was performed imposing both anhysteretic (total (AAR) and partial pAAR)) and isothermal remanence magnetizations (AIRM). Partial anhysteretic remanence anisotropy was performed based on remanent coercivity spectra from a pilot specimen of each site. In most sites, AMS is dominantly carried by ferromagnetic minerals, however, in some sites, the paramagnetic contribution exceeds 70% of bulk susceptibility. Rock magnetism and thin section analysis allow classifying the dikes as non-hydrothermalized and hydrothermalized. Magnetic measurement shows that the mean magnetic susceptibility is usually lower than 5×10⁻³ (SI). Ti-poor titanomagnetites up to pure magnetite pseudo-single-domain (PSD) grain sizes carry the majority of magnetic fabrics for non-hydrothermalized dikes whereas coarse to fine grained Ti-poor titanomagnetites carry the majority of magnetic fabrics for hydrothermalized dikes.Three primary AMS fabrics are recognized which are coaxial with ARM fabric, except for two dikes, from both non-hydrothermalized and hydrothermalized dikes. Normal AMS fabric surprisingly is not dominant (31%). The parallelism between AMS, pAAR_0–30, pAAR_30–60 and pAAR_60–90 fabrics in the hydrothermalized dikes indicates that magnetic grains formed due to late-stage crystallization or to remobilization of iron oxides due to hydrothermal alteration after dike emplacement have acquired a mimetic fabric coaxial with the primary fabric given by coarse-grained early crystallized Ti-poor titanomagnetites. This fabric is interpreted as magma flow in which the analysis of K_max inclination permitted the inference that the dikes were fed by horizontal or subhorizontal fluxes (K_max<30°). Intermediate AMS fabric is the most important (41%) in the investigated swarm. It is interpreted as due to vertical compaction of a static magma column with the minimum stress along the dike strike. ARM determinations for these sites also remained intermediate except for two dikes. In one of them, AIRM fabric resulted in normal AMS fabric while for the other AAR fabric resulted in inverse AMS fabric. A combination of AMS and ARM fabrics suggest that magmatic fabric for both dikes were overprinted by some late local event, probably related to Brasiliano orogenic processes after dike emplacement. InverseInverse AMS fabric is a minority (four dikes). ARM determinations also remained inverse suggesting a primary origin for inverse AMS fabric.     

Design of Inclined Covers with Capillary Barrier Effect

A design procedure is proposed to minimize water infiltration into landfills by optimizing the water diversion length of inclined covers with capillary barrier effect (CCBE). This design procedure is based on a conceptual, mathematical and numerical approach and aims at selecting materials and optimizing layer thickness. Selection among candidate materials is made based on their hydraulic conductivity functions and on a threshold infiltration rate imposed on the designer. The capillary break layer (CBL; bottom layer) is characterized by a weak capillarity, while the moisture retention layer (MRL; upper layer) is characterized by a compromise between strong capillarity and high hydraulic conductivity. The thickness of the CBL corresponds to the height where suction reaches its maximum value for a given infiltration rate. This height can be calculated using the Kisch [Géotechnique 9 (1959)] model. The optimal thickness of the MRL is determined by applying an adaptation of the Ross [Water Resources Research 26 (1990)] model. The results obtained using the proposed design procedure were compared to those obtained from numerical simulations performed using a finite element unsaturated seepage software. The procedure was applied for two cover systems; one where deinking by-products (DBP) were used as MRL and sand as CBL and another where sand was used as MRL and gravel as CBL. Using this procedure, it has been shown that an infiltration control system composed of thin layers of sand over gravel is highly efficient in terms of diversion length and that its efficiency can be enhanced by placing a hydraulic barrier – such as a layer of DBP – above the MRL.     

Divergence of solutions to perturbation-based advection-dispersion moment equations

Moment equation methods are popular and powerful tools for modeling transport processes in randomly heterogeneous porous media, but the application of these methods to advection-dispersion equations often leads to erroneous oscillations. Perturbative methods, required to close systems of moment equations, become inaccurate for large perturbations; however, little quantitative theory exists for determining when this occurs for advection-dispersion equations. We consider three different methods (asymptotic approximation, Eulerian truncation, and iterative solution) for closing and solving advection-dispersion moment equations describing transport in stratified porous media with random permeability. We obtain approximate analytical expressions for time above which the asymptotic approximation to the mean diverges, in particular quantifying the impact that dispersion has on delaying—but not eliminating—divergence. We demonstrate that Eulerian truncation and iterative solution methods do not eliminate divergent behavior either. Our divergence criteria provide a priori estimates that signal a warning to the practitioner of stochastic advection-dispersion equations to carefully consider whether to apply perturbative approaches.