A hydraulic invariance‐based methodology for the implementation of storm‐water release restrictions in urban land use master plans

A hydraulic invariance (HI)‐based methodology was developed as a tool to support implementation of storm flow control measures into land use master plans (LUMPs) for urban catchments. The methodology is based on the use of simple hydrologic analysis to compare predevelopment and postdevelopment catchment flow release scenarios. Differently from previous literature examples, for which the parcel scale is usually considered for the analysis, HI was pursued assuming the LUMP areas of transformation as the basic units for assigning storm water control measures in the form of flow release restrictions. The methodology was applied to a case study catchment in the southern part of the City of Catania (Italy), for which the LUMP re‐design has been recently proposed. Simulations were run based on the use of the EPA‐Storm Water Management Model and allowed deriving flow release restrictions in order to achieve HI at the subcatchment level for design events of different return period.     

Estimation of transit trip production using Factorial Kriging with External Drift: an aggregated data case study

Studies in transportation planning routinely use data in which location attributes are an important source of information. Thus, using spatial attributes in urban travel forecasting models seems reasonable. The main objective of this paper is to estimate transit trip production using Factorial Kriging with External Drift (FKED) through an aggregated data case study of Traffic Analysis Zones in São Paulo city, Brazil. The method consists of a sequential application of Principal Components Analysis (PCA) and Kriging with External Drift (KED). The traditional Linear Regression (LR) model was adopted with the aim of validating the proposed method. The results show that PCA summarizes and combines 23 socioeconomic variables using 4 components. The first component is introduced in KED, as secondary information, to estimate transit trip production by public transport in geographic coordinates where there is no prior knowledge of the values. Cross-validation for the FKED model presented high values of the correlation coefficient between estimated and observed values. Moreover, low error values were observed. The accuracy of the LR model was similar to FKED. However, the proposed method is able to map the transit trip production in several geographical coordinates of non-sampled values.     

Metallic Mineral Resources in the Twenty-First Century. I. Historical Extraction Trends and Expected Demand

Industrial, technological, and economic developments depend on the availability of metallic raw materials. As a greater fraction of the Earth’s population has become part of developed economies and as developed societies have become more affluent, the demand on metallic mineral resources has increased. Yet metallic minerals are non-renewable natural resources, the supply of which, even if unknown and potentially large, is finite. An analysis of historical extraction trends for eighteen metals, going back to the year 1900, demonstrates that demand of metallic raw materials has increased as a result of both increase in world population and increase in per-capita consumption. These eighteen metals can be arranged into four distinct groups, for each of which it is possible to identify a consistent pattern of per-capita demand as a function of time. These patterns can, in turn, be explained in terms of the industrial and technological applications, and in some cases conventional uses as well, of the metals in each group. Under the assumption that these patterns will continue into the future, and that world population will grow by no more than about 50% by the year 2100, one can estimate the amount of metallic raw materials that will be required to sustain the world’s economy throughout the twenty-first century. From the present until the year 2100, the world can be expected to require about one order of magnitude more metal than the total amount of metal that fueled technological and economic growth between the age of steam and the present day. For most of the metals considered here, this corresponds to 5–10 times the amount of metal contained in proven ore reserves. The two chief driving factors of this expected demand are growth in per-capita consumption and present-day absolute population numbers. World population is already so large that additional population growth makes only a small contribution to the expected future demand of metallic raw materials. It is not known whether or not the amount of metal required to sustain the world’s economy throughout this century exists in exploitable mineral resources. In the accompanying paper, I show that it is nevertheless possible to make statistical inferences about the size distribution of the mineral deposits that will need to be discovered and developed in order to satisfy the expected demand. Those results neither prove nor disprove that the needed resources exist but can be used to improve our understanding of the challenges facing future supply of metallic raw materials.     

Ecotoxicological evaluation of dredged sediments from Rodrigo de Freitas Lagoon (Rio de Janeiro State,Brazil) using bioassays with earthworms and collembolans

The toxicity and metal bioavailability were studied in dredged sediments from Rodrigo de Freitas Lagoon (Rio de Janeiro, RJ, Brazil) using acute and avoidance tests with Eisenia andrei, and reproduction tests with Folsomia candida. The sediment was mixed with an artificial soil, and two natural soils (ferralsol and chernosol—representative Brazilian tropical soils) to obtain the following doses: 1, 3, 6, 12, 18, 24 and 30%. Total metal concentrations were determined in the sediment to support the interpretation of ecotoxicological data. Metal concentrations in the mixtures were in agreement with the threshold limits established by Brazilian law. However, significant avoidance responses were found on doses ≥?3% and were the most sensitive endpoint. Earthworm mortality found in artificial soil mixtures (LC50?=?3.9) suggests higher toxicity levels than those obtained in ferralsol (LC50?=?7.6%) and chernosol (11.0%) treatments. Earthworm mortality, avoidance responses and collembolan reproduction levels found in ferralsol mixtures (LC50?=?9.2; avoidance EC50?=?2.3%; reproduction EC50?=?2.8%) were higher compared to chernosol treatments (LC50?=?11.0%; avoidance EC50?=?4.3%; reproduction EC50?=?4.9%). The reduction of toxicity levels in chernosol mixtures is probably due to the abundance of expansive clay minerals in chernosols with capacity of adsorbing metals and other xenobiotic substances from soil pore water, decreasing metal bioavailability. Finally, threshold limits defined by Brazilian legislation for soil quality and land disposal of dredged sediments are not sufficient to prevent noxious effects on soil fauna and should be complemented with a preliminary ecotoxicological evaluation.     

Seasonality and duration in extreme value distributions of significant wave height

This paper presents a statistical model to characterize the long-term extreme value distribution of significant wave height, conditioning to the duration of the storm and accounting for seasonality. A time-dependent version of the peak over threshold (POT) approach is used to build the model, which is then applied to specific reanalysis time series and NOAA buoy records. The model considers the annual and semiannual cycles which are parameterized in terms of harmonic functions. The inclusion of seasonal variabilities substantially reduces the residuals of the fitted model. The information obtained in this study can be useful to design maritime works, because (a) the model improves the understanding of the variability of extreme wave climate along a year and (b) the model accounts for the duration of the storm, which is a key parameter in several formulations for rubble mound breakwater design.     

The amphipod Talitrus saltator as a bioindicator of human trampling on sandy beaches

The present paper assesses the use of the supralittoral amphipod Talitrus saltator as a bioindicator of the effects of human trampling on the supralittoral sandy band. Samplings in delimited areas were carried out at sites subjected to different human impact. The results showed a strong negative correlation between the number of swimmers and the sandhopper population density, while there was no clear relationship between sandhopper abundance and the other factors considered: granulometry, compactness and organic carbon content of the sand, and trace metal contents in the sand and sandhoppers. A field test of trampling conducted in a confined space showed its direct negative effect on sandhopper survival. However, trace metal analysis confirmed the ability of T. saltator to bioaccumulate some elements (Hg, Zn, Cu, Cd). Our study demonstrates that T. saltator is a good bioindicator of human impact in the supralittoral zone of sandy shores.     

The Cabo Frio upwelling overrides geographical patterns in the population dynamics of the shrimp Artemesia longinaris Spence Bate, 1888 (Decapoda: Penaeidae)

Upwelling areas are among the most productive ecosystems on the planet, influencing the biology of marine organisms. This study investigated the population dynamics of the shrimp Artemesia longinaris in two regions in southeastern Brazil, one inside (Macaé—Rio de Janeiro State) and one outside (Ubatuba—State of São Paulo) the Cabo Frio upwelling area. The aim was to verify the influence of the upwelling phenomenon on the abundance, growth, longevity, size of sexual maturity, and reproductive period of the species. In total, 188,902 individuals were captured at Macaé and 3,461 at Ubatuba. Individuals captured at Macaé showed larger maximum size, higher longevity, and slower growth rate, besides reaching sexual maturity at larger sizes than at Ubatuba. Continuous reproduction was observed in both regions, with juvenile recruitment peaks in spring and summer. Local conditions observed at Macaé were influenced by the Cabo Frio upwelling zone, characterized by productive and cooler waters that are around 20°C during most of the year. The upwelling phenomenon is probably the main factor influencing the population parameters studied here, changing the geographic patterns previously observed for the variation of these parameters in A. longinaris.