Attenuation of coda waves and Q c value beneath the Chengdu telemetered seismic network

Based on the single scattering model of coda power spectrum analysis, digital waveform data of 50 events recorded by the real-time processing system of the Chengdu telemetry network are analyzed to estimate the Q _c values of earth medium beneath the Chengdu telemetry network for several specified frequencies. It is found that the Q _c shows the frequency dependency in the form of Q _c = Q ₀ f ⁿ in the range of 1.0 to 20.0Hz. Estimated Q ₀ ranges from 60.83 to 178.05, and n is found to be 0.713 to 1.159. The average value of Q ₀ and n are 117 and 0.978 respectively. This result indicates the strong frequency dependency of the attenuation of coda waves beneath the Chengdu telemetry network. Comparing with the results obtained in other regions of the world, it is found that Q ₀ ⁻¹ value and its change with frequency are similar to those in regions with strong tectonic activity. This subject is supported by the Ministry of Personnel, China for partly sponsoring.     

Heat transport variation due to change of North Pacific subtropical gyre interior flow during 1993–2012

Applying segment-wise altimetry-based gravest empirical mode method to expendable bathythermograph temperature, Argo salinity, and altimetric sea surface height data in March, June, and November from San Francisco to near Japan (30^° N, 145^° E) via Honolulu, we estimated the component of the heat transport variation caused by change in the southward interior geostrophic flow of the North Pacific subtropical gyre in the top 700 m layer during 1993–2012. The volume transport-weighted temperature (T_I) is strongly dependent on the season. The anomaly of T_I from the mean seasonal variation, whose standard deviation is 0.14^°C, was revealed to be caused mainly by change in the volume transport in a potential density layer of 25.0?25.5σ_??. The anomaly of T_I was observed to vary on a decadal or shorter, i.e., quasi-decadal (QD), timescale. The QD-scale variation of T_I had peaks in 1998 and 2007, equivalent to the reduction in the net heat transport by 6 and 10 TW, respectively, approximately 1 year before those of sea surface temperature (SST) in the warm pool region, east of the Philippines. This suggests that variation in T_I affects the warm pool SST through modification of the heat balance owing to the entrainment of southward transported water into the mixed layer.     

Finite element analysis and experimental verification of the scrap tire rubber pad isolator

A new base isolation system using scrap tire rubber pads (STRP) has been introduced for seismic mitigation of ordinary residential buildings. The rubber and the steel reinforcing cords used in manufacturing the tire are the alternative materials of the proposed base isolation system. The steel reinforcing cords represent the steel plates used in conventional laminated rubber bearings. These steel reinforcing cords shall prevent the lateral bulging of the rubber bearing. The proposed base isolation system has no bonding between the superstructure and the foundation beam which allows for rollover deformation. In the first part of the study, the STRP layers were just stacked one on top of another without applying the adhesive. This paper presents loading test as well as finite element analysis (FE analysis) of strip STRP isolators that are subjected to any given combination of static vertical and lateral loads. The results of the static vertical and horizontal loading test conducted on STRP isolators were used to calculate the mechanical properties of the isolators, including stiffness and damping values. The load–displacement relationship of STRP isolators were compared between experimental and FE analysis results and the results were found to be in close agreement. The stress state within the STRP isolators was also analyzed in order to estimate the maximum stress demand in the rubber and steel reinforcing cords. These STRP isolators have several advantages over conventional laminated rubber bearings including superior damping properties, lower incurred cost, light weight and easily available material. This study suggests that using the STRP as low cost base isolation device for ordinary residential buildings is feasible.     

Continuous measurement of whole‐tree water balance for studying urban tree transpiration

Street and garden trees in urban areas are often exposed to advection of strong vapour pressure deficit (VPD) air that can raise the whole‐tree transpiration rate (E_T), known as the oasis effect. However, urban trees tend to have small soil volume compared with natural conditions, and so they are believed to strongly regulate stomata. E_T characteristics of such urban trees have not been well understood because of a lack of reliable measurement methods. Therefore, we propose a novel weighing lysimeter method and investigate the whole‐tree water balance of an isolated container‐grown Zelkova serrata to examine (a) which biotic and abiotic factors determine E_T and (b) which spatial and temporal information is needed to predict E_T under urban conditions. Whole‐tree water balance and environmental conditions were measured from 2010 to 2012. Although leaf area substantially increased in the study period, daily E_T did not vary much. E_T increased with VPD almost linearly in 2010 but showed saturation in 2011 and 2012. Root water uptake lagged E_T by 40 min in 2012. These results suggest that the small planter box interfered with root growth and that hydraulic supply capacities did not increase sufficiently to support leaf area increase. From analysis of water balance, we believe that neglecting soil drought effects on street trees without irrigation in Japan will overestimate E_T over 4–5 sunny days at the longest. This is unlike previous studies of forest.     

Bottom pressure change associated with the 2004–2005 large meander of the Kuroshio south of Japan

A large meander of the Kuroshio was generated in the region off the southern coast of Japan in August 2004 and continued until approximately July 2005. The formation and decay of the large-meander (LM) path was observed by bottom pressure (BP) sensors installed on inverted echo sounders (PIESs) and a seismic observing system off Shikoku. The variation in BP was examined focusing on the development, persistence, and decay of the LM path. The BP was found to be depressed associated with a Kuroshio path disturbance, called a small meander, and this BP depression led the sea surface height (SSH) depression by up to approximately two months. The temporal phase shift between the sea surface and deep disturbances was significantly greater than those of other small meanders that did not develop into large meanders. After the formation of the LM path, the BP beneath the Kuroshio increased with a lag of approximately two months behind the SSH elevation along with the upward displacement of the main thermocline. The increase in BP is associated with that of the positive southward BP gradient anomaly, i.e., the eastward deep Kuroshio current anomaly, which suggests an enhancement of the topographic steering and stability of the LM path. This is consistent with the fact that no small meanders occurred in the early LM period from late July 2004 to late January 2005.     

Dissecting large earthquakes in Japan: Role of arc magma and fluids

We synthesized information from recent high-resolution tomographic studies of large crustal earthquakes which occurred in the Japanese Islands during 1995–2008. Prominent anomalies of low-velocity and high Poisson's ratio are revealed in the crust and uppermost mantle beneath the mainshock hypocenters, which may reflect arc magma and fluids that are produced by a combination of subducting slab dehydration and corner flow in the mantle wedge. Distribution of 164 crustal earthquakes ( M 5.7–8.0) that occurred in Japan during 1885–2008 also shows a correlation with the distribution of low-velocity zones in the crust and uppermost mantle. A qualitative model is proposed to explain the geophysical observations recorded so far in Japan. We consider that the nucleation of a large earthquake is not entirely a mechanical process, but is closely related to the subduction dynamics and physical and chemical properties of materials in the crust and upper mantle; in particular, the arc magma and fluids.     

Sulfur isotope study of Quaternary volcanic rocks from the Japanese Islands Arc

The sulfide and sulfate contents and their δ³⁴S values were determined in Quaternary volcanic rocks from the Japanese Islands Arc. The total sulfur contents are much lower (less than 40 ppm) and the δ³⁴S values are higher (+4.4 ± 2.1) than those of ocean-floor basalts (800 ± 100 ppm and +0.8 ± 0.5, respectively; Moore and Fabbi, 1971; Sakaiet al., 1982). Lateral variations of both sulfur content and δ³⁴S values were observed in the four volcanic belts in Japan. In the Northeast Japan belt, the sulfur content (30 ± 10 ppm) of the rocks in the inner zone (the Japan Sea side) is 3 to 5 times that in the outer zone (the Pacific side), although the δ³⁴S values of the two zones are almost the same (+4.3 ± 1.0). The δ³⁴S values for the two belts in West Japan are on the average 2%. higher than those of East Japan.This study suggests that the primary magmas that formed the island arc volcanic rocks are initially depleted in sulfur (<120 ppm) and enriched in ³⁴S ($\text{δ}{}^{34}\text{S: +5 ～ +7}$) compared to ocean-floor tholeiitic basalts which formed at mantle under oceanic region. This indicates that the upper-mantle is heterogeneous in sulfur content and isotope composition.     

Textural variations and impact history of the Millbillillie eucrite

Abstract— We have investigated 10 new specimens of the Millbillillie eucrite to study its textures and mineral compositions by electron probe microanalyser and scanning electron microscope. Although originally described as having fine-grained texture, the new specimens show diversity of texture. The compositions (Mg/Fe ratios) of the host pigeonites and augite lamellae are homogeneous, respectively, in spite of the textural variation. In addition to their chemical homogeneity, pyroxenes in coarse and fine-grained clasts are partly inverted to orthopyroxene. Chemical zoning of plagioclase during crystal growth is preserved. This eucrite includes areas of granulitic breccias and impact melts. Large scale textures show a subparallel layering suggesting incomplete mixing and deposition of impact melt and lithic fragments. An ³⁹Ar-⁴⁰Ar age determination for a coarse-grained clast indicates a strong degassing event at 3.55 ± 0.02 Ga. We conclude that Millbillillie is among the most equilibrated eucrites produced by thermal annealing after impact brecciation. According to the classification of impact breccias, Millbillillie can be classified as a mixture of granulitic breccias and impact melts. The last significant thermal event is characterized by network-like glassy veins that run through clasts and matrices. Consideration of textural observations and requirements for Ar-degassing suggests that the ³⁹Ar-⁴⁰Ar age could in principle date either the earilier brecciation and annealing event or the event which produced the veins.