Geneses of High Chlorine and Silver–Lead–Zinc–Mineralized Granitoids in Tsushima, Japan

Abstract: Miocene granitoids of the Tsushima Islands have unique characteristics that cannot be seen in other major granitic plutons in the Japanese Islands as follows: (1) They are granitic in composition but contain synplutonic mafic dikes, abundant mafic enclaves, and intermediate facies between granite and mafic enclaves. (2) They are mixture of magnetite‐bearing and –free facies, but generally magnetite‐free in the marginal part. (3) They are high in K₂O content (K₆₅=3. 1) and intermediate in normative corundum (C₆₅=0. 1) and δ¹⁸O value (+9% at SiO₂ 70 %), which may be comparable with those of the Miocene Outer Zone granitoids. (4) Yet the initial Sr ratio is low as 0. 7037. (5) They are high in Cl and S, which occur in fluid inclusions and as pyrrhotite>pyrite, respectively. Two genetic models are considered for the source of the unique granitoid magmas: the continental crust or the upper mantle fertilized with Si, K and ¹⁸O. The latter may be the case for the Tsushima granitoids, because of the low initial Sr ratio. The age of the granitoids (16 Ma) indicates the magmatism related to the opening of the Sea of Japan. It is suggested that both basaltic and granitic magmas were generated in the continental lithosphere under an extensional tectonic setting; the two magmas could have been partly mingled. The mingled magma was originally an oxidized type, but reduced during the emplacement by repeated inflow of S and C‐bearing gases from the pelitic wall rocks. Because of the reduction, SO₃ sulfur is almost nil in the rock‐forming apatite, and most of sulfur remained in fluid phase of the magma as reduced species. Cl content was high in the original magma and concentrated in the fluid phase of the residual system which dissolved silver, lead and zinc metals. Such a fluid migrated into the Taishu fracture systems, as the magma crystallized, and formed the silver–lead–zinc deposits.     

Sulfur Isotope Study and Re-examination of Ore Mineral Assemblage of the Hol Kol and the Tul Mi Chung Skarn-type Copper–Gold Deposits of the Suan Mining District, Korean Peninsula

Abstract: Ore specimens collected by the late Professor Takeo Watanabe from the Hol Kol and the Tul Mi Chung deposits, Suan mining district, Korean peninsula, were examined. In addition, measurements of sulfur isotopic ratio of ores and preliminary fluid inclusion microthermometry were carried out. Ores from the New orebody of the Hol Kol deposit consist mainly of bornite, wittichenite and chalcopyrite presently, which exhibit lamellae intergrowth texture, associated with native bismuth and electrum. Bismuthian bornite solid solution is considered to be a principal initial phases, while native bismuth was nucleated as molten bismuth melt initially. The occurrence of cubanite, miharaite, carrollite, siegenite, hessite and geikielite are recognized from the New orebody. Ores from the Eastern orebody of the Hol Kol deposit consist chiefly of chalcopyrite, occasionally associated with trace amounts of pyrrhotite, pyrite, bismuthinite and rare tellurobismuthite, while an ore specimen from the Western orebody consists mainly of sphalerite associated with chalcopyrite, pyrite and galena. Ores from the Tul Mi Chung deposit consist mainly of chalcopyrite and pyrite, occasionally associated with magnetite, sphalerite, galena and rare molybdenite. Some portions of magnetite are revealed to be silician magnetite. Sulfur fugacity is supposed to be below the stability field of bismuthinite in the New orebody. A reducing condition is suggested by the occurrence of geikielite without Fe³⁺ content. The sulfur and oxygen fugacities for the Eastern and Western orebodies of the Hol Kol deposit and for the Tul Mi Chung deposit were higher than the New orebody of the Hol Kol deposit. On the other hand, the Suan granite (porphyritic granodiorite) and the Chil Sing Dai granite (biotite granite porphyry) from the Hol Kol area can be classified as weakly magnetic magnetite‐series. Polyphase fluid inclusions are observed in gangue diopside associated with Cu ore of two specimens. The dissolution temperatures of daughter crystals are 394±26°C and 442±45°C, while the disappearing temperatures of vapor bubble were 475±25°C and > 500°C. Highly saline fluids were responsible for the mineralization at the Hol Kol deposit. The δ³⁴S values of ore sulfides of the Hol Kol and the Tul Mi Chung deposit range from +11. 5% to +16. 1%, having anomalous lower values mainly from the Tul Mi Chung deposit. Such anomalous lower 6³⁴S values can be caused by isotopic fractionation against oxidized sulfur species. The δ³⁴S value of bulk sulfur in the ore solutions responsible for the Hol Kol and the Tul Mi Chung deposit is estimated to be +13.5±2.5‰.     

Short‐term flood inundation prediction using hydrologic‐hydraulic models forced with downscaled rainfall from global NWP

A short‐term flood inundation prediction model has been formulated based on the combination of the super‐tank model, forced with downscaled rainfall from a global numerical weather prediction model, and a one‐dimensional (1D) hydraulic model. Different statistical methods for downscaled rainfall have been explored, taking into account the availability of historical data. It has been found that the full implementation of a statistical downscaling model considering physically‐based corrections to the numerical weather prediction model output for rainfall prediction performs better compared with an altitudinal correction method. The integration of the super‐tank model into the 1D hydraulic model demonstrates a minimal requirement for the calibration of rainfall–runoff and flood propagation models. Updating the model with antecedent rainfall and regular forecast renewal has enhanced the model's capabilities as a result of the data assimilation processes of the runoff and numerical weather prediction models. The results show that the predicted water levels demonstrate acceptable agreement with those measured by stream gauges and comparable to those reproduced using the actual rainfall. Moreover, the predicted flood inundation depth and extent exhibit reasonably similar tendencies to those observed in the field. However, large uncertainties are observed in the prediction results in lower, flat portions of the river basin where the hydraulic conditions are not properly analysed by the 1D flood propagation model. Copyright © 2013 John Wiley & Sons, Ltd.     

Mineralogical alteration of a type A CAI from Allende CV3 chondrite: Formation of secondary dmisteinbergite and its phase transition to anorthite

Dmisteinbergite, a hexagonal form of CaAl₂Si₂O₈, was found in a compact type A Ca-Al-rich inclusion (CAI) in the Allende CV3 chondrite. Scanning and transmission electron microscopic observations show that dmisteinbergite was always in contact with grossular and grossular was in contact with melilite. In addition, there is a crystallographic relationship between dmisteinbergite and anorthite. Based on the textural and crystallographic evidence, the following mineralogical alteration processes are proposed to have occurred in the CAI. (1) Melilite was replaced by grossular. High densities of vesicles in the grossular indicate that hydrogrossular might have been the primary alteration phase and dehydrated by later metamorphism. (2) Dmisteinbergite formed from (hydro)grossular through a reaction with Si-rich fluid. (3) Nano-sized minerals are formed within dmisteinbergite. (4) Dmisteinbergite was transformed to anorthite. (5) Both anorthite and dmisteinbergite were altered to nepheline. (6) Hydrogrossular was dehydrated to grossular. (Hydro)grossular, dmisteinbergite, anorthite, and nepheline in the CAI seem to have formed in the course of metasomatism that occurred in the Allende parent body. Except for the hydrogrossular dehydration, these reactions could have occurred at moderate temperature (200–250°C) in high pH fluids (pH 13–14) according to past experimental studies. Episodic changes in fluid composition seem to have occurred before reactions (2), (4), and (5), because these reactions were not completed before the next reaction started. Higher temperature is required for reactions (5) and (6) to occur. Our observation of the CAI suggests that it experienced multiple episodes of metasomatism as temperatures were rising in the Allende parent asteroid.     

The detectability of shallow slow earthquakes by the Dense Oceanfloor Network system for Earthquakes and Tsunamis (DONET) in Tonankai district,Japan

In order to understand the characteristics of shallow very low-frequency (VLF) events as revealed by recent ocean-floor observation studies, we perform a trial simulation of earthquake cycles in the Tonankai district by taking the characteristics of the 1944 Tonankai earthquake and assuming that slow earthquakes occur on numerous small asperities. Our simulation results show that the increase of moment release rate of shallower VLF events in the pre-seismic stage of a megathrust earthquake is higher than that of deeper VLF events. This increase may make leveling change due to VLF swarms detectable at Dense Oceanfloor Network system for Earthquakes and Tsunamis (DONET). We also introduce the time series of hydraulic pressure data at DONET, comparing with the leveling change expected from our numerical simulation. Since leveling change due to shallower VLF swarms is so local as to be incoherent, removal of the moving-averaged data from the data stacked by four nearby observation points in the same node may be useful to detect the short-term local leveling change.     

Cross-Validation of Open-Path and Closed-Path Eddy-Covariance Techniques for Observing Methane Fluxes

Methane ( ${\mathrm {CH}}_{4}$ ) fluxes observed with the eddy-covariance technique using an open-path ${\mathrm {CH}}_{4}$ analyzer and a closed-path ${\mathrm {CH}}_{4}$ analyzer in a rice paddy field were evaluated with an emphasis on the flux correction methodology. A comparison of the fluxes obtained by the analyzers revealed that both the open-path and closed-path techniques were reliable, provided that appropriate corrections were applied. For the open-path approach, the influence of fluctuations in air density and the line shape variation in laser absorption spectroscopy (hereafter, spectroscopic effect) was significant, and the relative importance of these corrections would increase when observing small ${\mathrm {CH}}_{4}$ fluxes. A new procedure proposed by Li-Cor Inc. enabled us to accurately adjust for these effects. The high-frequency loss of the open-path ${\mathrm {CH}}_{4}$ analyzer was relatively large (11 % of the uncorrected covariance) at an observation height of 2.5 m above the canopy owing to its longer physical path length, and this correction should be carefully applied before correcting for the influence of fluctuations in air density and the spectroscopic effect. Uncorrected ${\mathrm {CH}}_{4}$ fluxes observed with the closed-path analyzer were substantially underestimated (37 %) due to high-frequency loss because an undersized pump was used in the observation. Both the bandpass and transfer function approaches successfully corrected this flux loss. Careful determination of the bandpass frequency range or the transfer function and the cospectral model is required for the accurate calculation of ${\mathrm {CH}}_{4}$ fluxes with the closed-path technique.     

Inter-laboratory comparison of oxygen isotope compositions from biogenic silica

Several techniques have been introduced in the last decades for the dehydration and release of O₂ from biogenic silica (opal-A) for oxygen-isotope analysis. However, only one silica standard is universally available: a quartz standard (NBS28) distributed by the IAEA, Vienna. Hence, there is a need for biogenic silica working standards. This paper compares the existing methods of oxygen-isotope analyses of opal-A and aims to characterize additional possible working standards to calibrate the δ¹⁸O values of biogenic silica. For this purpose, an inter-laboratory comparison was organized. Six potential working standard materials were analysed repeatedly against NBS28 by eight participating laboratories using their specific analytical methods. The materials cover a wide range of δ¹⁸O values (+23 to +43‰) and include diatoms (marine, lacustrine), phytoliths and synthetically-produced hydrous silica. To characterize the proposed standards, chemical analyses and imaging by scanning electron microscopy (SEM) were also performed. Despite procedural differences at each laboratory, all methods are in reasonable agreement with a standard deviation (SD) for δ¹⁸O values between 0.3‰ and 0.9‰ (1σ). Based on the results, we propose four additional biogenic silica working standards (PS1772-8: 42.8‰; BFC: 29.0‰; MSG60: 37.0‰; G95-25-CL leaves: 36.6‰) for δ¹⁸O analyses, available on request through the relevant laboratories.     

Distribution of ephyrae and polyps of jellyfish <Emphasis Type="Italic">Aurelia</Emphasis><Emphasis Type="Italic">aurita</Emphasis> (Linnaeus 1758) <Emphasis Type="Italic">sensu lato</Emphasis> in Mikawa Bay,Japan

We surveyed the distribution of colonies of polyps of Aurelia aurita sensu lato (s.l.) in Mikawa Bay, Japan. First, we surveyed the distribution of ephyrae of A. aurita s.l. at 75 stations encompassing the whole of Mikawa Bay in early 2008. A total of 37 ephyrae were sampled mostly from fishing ports. Ephyrae were most abundant around the islands located near the mouth of the bay, and decreased from the western part to the eastern part of Mikawa Bay. Next, we selected five fishing ports in Mikawa Bay where ephyrae occurred and surveyed the underside of floating piers and underwater overhangs of wharfs. We found dense colonies of polyps of A. aurita s.l. under nearly all of the floating piers at the two islands located near the mouth of the bay. Fitting a logistic regression model to the dataset showed that the percentage coverage of Aurelia polyps was significantly greater at the two islands compared with the other locations. In addition, the coverage of Aurelia polyps was greater when the coverage of other fouling organisms was in the range of 65–90%, and the coverage of Aurelia polyps was lower on floating piers with a vinyl surface and on concrete wharfs. The combined distribution of polyp colonies of A. aurita s.l. in Ise Bay and Mikawa Bay suggested that A. aurita s.l. in the two bays probably forms a single population and shoals of medusae mainly originate from protected harbors along the mouth-part of the bays.     

Extracting fair-weather data from atmospheric electric-field observations at Syowa Station, Antarctica

At Syowa Station (69.0°S, 39.6°E), located on East Ongul Island near the continent of Antarctica, atmospheric electric-field observations started in 1968 and had been carried out intermittently. An improved electric-field mill at Syowa Station had and obtained better-quality atmospheric electric-field data from February 2005 to January 2006. After a 1-year interruption, the observations resumed in January 2007.The atmospheric electric-field data from Syowa Station are often contaminated due to local disturbances caused by near-ground meteorological phenomena. We examined correlations between the atmospheric electric field and near-ground weather from February 2005 to January 2006 and from February 2007 to January 2008, and proposed a criterion to extract “fair-weather” electric-field data based on wind speed and cloud coverage data. The diurnal variation of fair-weather data in January followed the shape of the so-called Carnegie curve. Fair-weather data obtained during a substorm showed some correspondence between the atmospheric electric field and variations in the geomagnetic field. This newly developed extraction method may enable the use of atmospheric electric-field data for studying the solar terrestrial environment.