Radiometrically determined skin temperature and scalar roughness to estimate surface heat flux. Part I: Parameterization of radiometric scalar roughness

A series of experiments carried out in a pasture field during a growing season, allowed a radiometric determination of the scalar roughness for sensible heatz _oh,r . The values ofz _oh,r are shown to vary over the range of 10^–1–10^–7m both diurnally and seasonally, and an existing theoretical model for the estimation of scalar roughness for sensible heat is found to be inappropriate for the precise estimation ofz _oh,r . To parameterizez _oh,r better, a multiple regression analysis was performed, with predictor candidates such as solar elevation, solar radiationR _s , leaf area index LAI, canopy height, the ratio of the solar radiation and the extraterrestrial radiationR _s /R _e , the ratio of the direct and the total solar radiationR _d /R _s , and the roughness Reynolds number among others. The best regression equation which usesR _s , LAI,R _s /R _e , andR _d /R _s is derived withr=0.75; with smaller numbers of predictors, values ofr tend to deteriorate gradually down tor=0.52 when only one predictor, LAI, was incorporated into the equation.     

The effects of precipitation schemes and horizontal resolution on the major rainband in typhoon Flo (1990) predicted by the MRI mesoscale nonhydrostatic model

Summary ?This paper describes a numerical study of the major spiral rainband in typhoon Flo (1990) using the Meteorological Research Institute Mesoscale Nonhydrostatic Model (MRI-NHM). The effects of precipitation schemes and horizontal resolution on the representation of the simulated rainband are discussed. Dynamic and thermodynamic structures of the simulated major rainband to the north of the storm center are well represented in the model with a 5 km horizontal resolution. The structures are consistent with observational results reported for other tropical cyclones. Among the realistic features are: a cold pool and convergence on the inner side of the band; convergence above low-level inflow layers; and the outward slope of the updraft with height. The band is caused by the motion of the storm through its surroundings where horizontal wind has vertical shear. The simulation of the structure and precipitation pattern associated with the major rainband depends on the precipitation scheme rather than the horizontal resolution. The band appears more realistic when using explicit cloud microphysics as a precipitation scheme, rather than moist convective adjustment. This result is attributable to the difference in scheme triggering. In the simulation with moist convective adjustment, the elimination of vertical instability in low-level atmosphere is excessive, suppressing band formation. The overall structure of the band is also more realistic in the simulation using explicit cloud microphysics, because a cold pool exists in the lower layers and the vertical axis of upward flow tilts outward. This result suggests that prediction will partly depend on variables associated with cloud microphysics, such as the mixing ratio of cloud water. The horizontal grid distance, which varied between 5 and 20 km, quantitatively influenced the rainfall amount, although the large-scale band structure remained unchanged. The rainfall amount increased as the grid interval was reduced from 20 to 10-km but decreased as the interval was further reduced from 10 to 5 km. Received March 20, 2001; revised August 20, 2001     

Collapse simulation of a four‐story steel moment frame by a distributed online hybrid test

The collapse of a one‐bay, four‐story steel moment frame is simulated in this study by the proposed peer‐to‐peer (P2P) Internet online hybrid test system. The typical beam hinging mechanism, which is ensured by a strong‐column, weak‐beam design, is reproduced. The plastic hinges at the column bases are taken as the experimental portions, while the superstructure is analyzed numerically by a general‐purpose finite element program. The implicit plastic rotations of the two column bases are treated as boundary displacements. In order to account for the complex behavior of the column bases, the P2P system is modified to use the secant stiffness during iterations, and the physical specimens are designed such that the plastic hinge behavior can be obtained. For this study, the three substructures are distributed to different locations. A large ground motion is repeatedly imposed until the column bases lose their capacity to sustain the gravity load. As a result, significant deterioration is observed at both column bases. The proposed P2P system is thus demonstrated to be able to accommodate multiple‐tested substructures involving unstable behavior. The results suggest that the P2P Internet online hybrid test system provides a reliable means of studying structures up to collapse. Copyright © 2008 John Wiley & Sons, Ltd.     

Spatial and temporal variations of stable isotopes in precipitation in midlatitude coastal regions

Spatial and temporal variations of the isotopic composition of precipitation were investigated to better understand their controlling factors. Precipitation was collected from six locations in Hokkaido, Japan, and event‐based analyses were conducted for a period from March 2010 to February 2013. Relatively low δ values and a high d‐excess for annual averages were observed at three sites located along the Japan Sea compared to the three sites at Pacific Ocean side. Lower δ values in spring and fall and higher d‐excess in winter were observed for the region along the Japan Sea. In total, 264 precipitation events were identified. Precipitation originated predominantly from low‐pressure system (LPS) events, which were classified as northwest (LPS‐NW) and southeast (LPS‐SE) events according to the routes of the low‐pressure center, that passed northwest and southeast of Hokkaido, respectively. LPS‐SE events showed lower δ¹⁸O than LPS‐NW events, which is attributable to the lower δ¹⁸O of water vapor resulting from heavy rainfalls in the upstream region of the LPS air mass trajectories over the Pacific Ocean. This phenomenon observed in Hokkaido can be found in other midlatitude coastal regions and applied for hydrological, atmospheric, and paleoclimate studies. A characteristic spatial pattern was found in LPS‐NW events, in which lower δ¹⁸O was observed on the Japan Sea side than on the Pacific Ocean side in each season. This is likely due to the location of the sampling sites and their distance from the LPS: Precipitation with lower δ¹⁸O in the region along the Japan Sea occurs in a well‐developed cloud system near the low‐pressure center in cold and warm sectors of LPS, whereas precipitation with higher δ¹⁸O on the Pacific side mainly occurs in a warm sector away from the low‐pressure center. Air mass from the north does not always cause low δ in precipitation, and the precipitation process in the upstream region is another important factor controlling the isotopic composition of precipitation, other than the local temperature and precipitation amount.     

Study of the effect of water-soluble fractions of heavy-oil on coastal marine organisms using enclosed ecosystems,mesocosms

Mesocosm facilities composed of 4 experimental and 2 reservoir tanks (1.5 m in diameter, 3.0 m in depth and 5 tons in capacity) made of FRP plastics, were constructed in the concrete fish rearing pond in the Fisheries Laboratory, The University of Tokyo. The water-soluble fraction of Rank A heavy residual oil was formed by mixing 500 g of the oil with 10 l of seawater, which was introduced to the 5000 l-capacity tanks. Experimental Run 4 was conducted from May 31 to June 7, 2000. Oil concentrations in the tanks were 4.5 microg/l called LOW, and 13.5 microg/l, called HIGH tank. Bacterial growth rates very quickly accelerated in the HIGH tank just after the loading of oil which corresponded with a high increase of bacterial cells in the same tank after 2 days. Later, bacterial numbers in HIGH tank rapidly decreased, corresponding with the rapid increase of heterotrophic nano-flagellates and virus numbers on the same day. Sediment traps were deployed at the bottom of the experimental tanks, and were periodically retrieved. These samples were observed both under light microscope and epi-fluorescent microscope with UV-excitation. It was observed that the main components of the vertical flux were amorphous suspended matter, mostly originating from dead phytoplankton and living diatoms. It was further observed from the pictures that vertical transport of oil emulsions were probably conducted after adsorption to amorphous suspended matter and living diatoms, and were settling in the sediment traps at the bottom of the tanks. This means that the main force which drives the soluble fraction of oil into bottom sediment would be vertical flux of such amorphous suspended particles and phytoplankton. Further incubation of the samples revealed that the oil emulsions were degraded by the activity of autochtonous bacteria in the sediment in aerobic condition.     

Melting of enstatite from 13 to 18 GPa under hydrous conditions

Experiments on MgSiO₃ enstatite were conducted in the pressure range from 13 to 18 GPa under hydrous conditions in order to clarify the effect of water on the melting phase relations of enstatite at pressures corresponding to the Earth’s mantle transition zone. In some previous experiments [Geol. Soc. Am. Bull. 79 (1968) 1685; Phys. Earth Planet. Inter. 85 (1994) 237], incongruent melting behavior to form Mg₂SiO₄ forsterite and SiO₂ enriched liquid up to 5 GPa was observed, and congruent melting behavior at pressures up to 12 GPa was observed. Under hydrous conditions, we found that the melting reaction changes from congruent to incongruent at around 13.5 GPa. Liquid formed above 13.5 GPa is enriched in MgO component relative to MgSiO₃ because it coexists with stishovite (SiO₂). Moreover, the solidus temperature decreases drastically at around 13.5 GPa, in unison with the change in the melting reaction. The solidus temperature is about 1400 °C at 13 GPa, but approximately 900 °C at 15 GPa. Our results show that the liquidus phase changes from clinoenstatite to stishovite with increasing pressure and water content above 13.5 GPa. MgSiO₃ enstatite is one of the major constituent minerals in the Earth’s mantle, and it is expected that MgO-enriched liquid will be generated in the transition zone if water is present.     

Potential of Oil Palm Trunk Sap as a Novel Inexpensive Renewable Carbon Feedstock for Polyhydroxyalkanoate Biosynthesis and as a Bacterial Growth Medium

Utilization of cheap renewable carbon feedstock for polyhydroxyalkanoate (PHA) production not only brings down its production cost but also ensures sustainability. The scope of this study was to evaluate the potential of sap extracted from felled oil palm trunk (OPT) as a novel inexpensive renewable carbon source for PHA production. OPT sap was found to be nutritionally rich and contained various fermentable sugars (5.5% w/v) as its major constituent. Termite gut isolate, Bacillus megaterium MC1 grew profoundly in mineral medium with OPT sap as carbon source and a cell density of 10.9 g/L was attained after 16 h of cultivation in shake flask cultures. A maximum poly‐3‐hydroxybutyrate [P(3HB)] content (% cell dry weight; CDW) of 30 wt% and a P(3HB) concentration of 3.28 g/L was recorded. Additionally, OPT sap extracted from younger tree trunks with prolonged storage had higher sugar content (10.8% w/v) and, when used as a growth medium without the addition of any nutrients, supported bacterial growth comparable to commercially available media.     

Felsic dykes in the Neoproterozoic Nagar Parkar Igneous Complex,SE Sindh,Pakistan: geochemistry and tectonic settings

The Nagar Parkar Igneous Complex consists of Neoproterozoic igneous and metamorphic rocks dissected by mafic, felsic, and rhyolitic dykes. The latter can be classified broadly into porphyritic felsic dykes intruding gray and pink granites at Nagar Parkar and the surrounding areas, and the orthophyric felsic dykes intruding amphibolites, deformed pink granites, and the alkaline mafic dykes in the Dhedvero area, north of Nagar Parkar. The porphyritic felsic dykes are composed of perthites, quartz, and albitic plagioclase whereas the orthopheric felsic dykes contain K-feldspar (dominant), plagioclase, and minor quartz. Geochemically, the porphyritic and orthophyric felsic dykes are subalkaline and alkaline demonstrating post-orogenic A2- and OIB-A1-type characteristic on Nb–Y–Ce and Nb–Y–3Ga ternary plots, respectively. One orthophyric felsic dyke contains normative acmite and sodium metasilicate. This study suggests two distinct tectonic regimes for the origin of the felsic dykes of the area. The porphyritic felsic dykes show similarities with the ~800–700 Ma granites of the area, the rhyolite dykes of the Mount Abu, western Rajasthan in India, and the granites of the Seychelles microcontinent. The orthophyric felsic dykes show chemical resemblance with the Tavidar volcanic suite of western Rajasthan and the Silhouette and North islands of the Seychelles microcontinent. This study confirms spatial and temporal links among the Rodinian fragments exposed in the Nagar Parkar area of Pakistan, western Rajasthan of India, and the Seychelles microcontinent.     

Aerodynamic Scaling for Estimating the Mean Height of Dense Canopies

We used an aerodynamic method to objectively determine a representative canopy height, using standard meteorological measurements. The canopy height may change if the tree height is used to represent the actual canopy, but little work to date has focused on creating a standard for determining the representative canopy height. Here we propose the ‘aerodynamic canopy height’ h _a as the most effective means of resolving the representative canopy height for all forests. We determined h _a by simple linear regression between zero-plane displacement d and roughness length z ₀, without the need for stand inventory data. The applicability of h _a was confirmed in five different forests, including a forest with a complex canopy structure. Comparison with stand inventory data showed that h _a was almost equivalent to the representative height of trees composing the crown surface if the forest had a simple structure, or to the representative height of taller trees composing the upper canopy in forests with a complex canopy structure. The linear relationship between d and z ₀ was explained by assuming that the logarithmic wind profile above the canopy and the exponential wind profile within the canopy were continuous and smooth at canopy height. This was supported by observations, which showed that h _a was essentially the same as the height defined by the inflection point of the vertical profile of wind speed. The applicability of h _a was also verified using data from several previous studies.     

Stability of genetic diversity in an intertidal goby population after exposure to tsunami disturbance

Massive tsunami disturbances have potentially detrimental effects on genetic diversity and effective population size of coastal marine species, and evaluating these effects can be useful for devising conservation strategies for coastal marine environments. Local populations of the intertidal goby Chaenogobius annularis, which are distributed on scattered rocky beaches of the Japanese Archipelago, show demographic independence without overlapping generations, making this an ideal species with which to study the effects of tsunami disturbance on genetic diversity. Some of these populations were affected by the tsunami of the 2011 off the Pacific coast of Tohoku Earthquake. Here, we investigated the change in genetic diversity of a local population of this species, which was located close to the epicenter of the earthquake, across the cohorts before and after the tsunami and evaluated the impact of the tsunami disturbance. Genetic diversity was maintained after the tsunami, and no change in the effective population size was observed. Our results suggest that the tsunami disturbance has had no marked impact on the genetic diversity of C. annularis.