On-the-fly GPS-based attitude determination using single- and double-differenced carrier phase measurements

Carrier phase measurements are primary observations for GPS attitude determination. Although the satellite-related errors can be virtually eliminated by forming single differences, the baseline-related errors such as line biases are still present in the single-differenced carrier phase measurements. It is, therefore, difficult to resolve the single-differenced integer ambiguities due to the line biases. By forming double differences, the line biases of the single-differenced carrier phase measurements can be effectively removed. However, the main disadvantages of this method lie in the fact that the double-differenced measurements are mathematically correlated and consequently the attitude obtained from the double differences is noisy. This paper presents a new algorithm through which both single and double differences are used simultaneously to resolve these problems in real-time. The solution of the integer ambiguities can be obtained by searching for the most likely grid point in the attitude domain that is independent of the correlation with the double differences. Next, the line biases and corresponding single difference integer ambiguities can be resolved on the fly by using the noisy attitude solution obtained from the previous double difference procedure. In addition, the relationship between the physical signal path difference and the line bias is formed. A new method is also applied to derive the attitude angles through finding the optimal solution of the attitude matrix element. The proposed new procedure is validated using ground and flight tests. Results have demonstrated that the new algorithm is effective and can satisfy the requirement of real-time applications.     

Simulating the carbon balance of a temperate larch forest under various meteorological conditions

This editorial provides a subject index from published articles, active researchers, and published papers in the field of carbon balance and management.     

Electric currents along earthquake faults and the magnetization of pseudotachylite veins

Pseudotachylites occur in the form of thin glassy veins quenched from frictional melts along the fault planes of major earthquakes. They contain finely grained magnetite and often exhibit a high natural remanent magnetization (NRM). High NRM values imply strong local electric currents. These currents must persist for some time, while the pseudotachylite veins cool through the Curie temperature of magnetite around 580 °C. There is no generally accepted theory explaining how such powerful, persistent currents may be generated along the fault plane. Data presented here suggest the activation of electronic charge carriers, which are present in igneous rocks in a dormant, inactive form. These charge carriers can be “awakened” by the application of stress. They are electrons and defect electrons, also known as positive holes or p-holes for short. While p-holes are capable of spreading out of the stressed rock volume into adjacent p-type conductive unstressed rocks, electrons require a connection to the hot, n-type conductive lower crust. However, as long as the (downward) electron flow is not connected, the circuit is not closed. Hence, with the outflow of p-holes impeded, no current can be sustained. This situation is comparable to that of a charged battery where one pole remains unconnected. The friction melt that forms coseismically during rupture, provides a conductive path downward, which closes the circuit. This allows a current to flow along the fault plane. Extrapolating from laboratory data, every km³ of stressed igneous rocks adjacent to the fault plane can deliver 10³–10⁵ A. Hence, the current along the fault plane will not be limited by the number of charge carriers but more likely by the (electronic) conductivity of the cooling pseudotachylite vein. The sheet current will produce a magnetic field, whose vectors will lie in the fault plane and perpendicular to the flow direction.     

Deformation mechanisms and fluid behavior in a shallow, brittle fault zone during coseismic and interseismic periods: Results from drill core penetrating the Nojima Fault, Japan

Abstract This paper describes the results of petrographical and meso- to microstructural observations of brittle fault rocks in cores obtained by drilling through the Nojima Fault at a drilling depth of 389.52 m. The zonation of deformation and alteration in the central zone of the fault is clearly seen in cores of granite from the hanging wall, in the following order: (i) host rock, which is characterized by some intragranular microcracks and in situ alteration of mafic minerals and feldspars; (ii) weakly deformed and altered rocks, which are characterized by transgranular cracks and the dissolution of mafic minerals, and by the precipitation of zeolites and iron hydroxide materials; (iii) random fabric fault breccia, which is characterized by fragmentation, by anastomosing networks of transgranular cracks, and by the precipitation of zeolites and iron hydroxide materials; and (iv) fault gouge, which is characterized by the precipitation of smectite and localized cataclastic flow. This zonation implies that the fault has been weakened gradually by fluid-related fracturing over time. In the footwall, a gouge layer measuring only 15 mm thick is present just below the surface of the Nojima Fault. These observations are the basis for a model of fluid behavior along the Nojima Fault. The model invokes the percolation of meteoric fluids through cracks in the hanging wall fault zone during interseismic periods, resulting in chemical reactions in the fault gouge layer to form smectite. The low permeability clay-rich gouge layer sealed the footwall. The fault gouge was brecciated during coseismic or postseismic periods, breaking the seal and allowing fluids to readily flow into the footwall, thus causing a slight alteration. Chemical reactions between fluids and the fault breccia and gouge generated new fault gouge, which resealed the footwall, resulting in a low fluid condition in the footwall during interseismic periods.     

Notes on the temporal and spatial scales of climatic changes

Summary An investigation of the relationship between climatic change at various temporal and spatial scales was conducted making use of correlation and coherence analyses applied to observed monthly and annual global mean temperature data. Results indicate that the spatial scale does not change in spite of an increase in the temporal scale. Furthermore, a certain pattern, suggesting a teleconnection, was often observed in the scatter diagrams of correlations and coherence squared related to distance. We speculate that this is due to the constancy of the general circulation of the atmosphere for temporal scales.With 5 Figures     

Tsunami ascending in rivers as an undular bore

At time of the 1983 Japan Sea tsunami, waves in the form of a bore ascended many rivers. In some cases, bores had the form of one initial wave with a train of smaller waves, and in other cases, such a wave train did not appear and only a step with a flat water surface behind was observed. In the present study, it is clarified that both undular-type and nonundular-type bores can be recognized as solutions of the KdV-Burger's equation which was introduced by Johnson in 1972. Numerically obtained analytical solutions and results of laboratory experiments are compared.     

Sulphide and oxide minerals from the Ohmine granitic rocks in Kii Peninsula,central Japan,and their primary paragenetic relations

In the Ohmine granitic rocks of Kii Peninsula, central Japan, ilmenite, rutile, pyrrhotite, pyrite and chalcopyrite commonly occur, but no magnetite is present. Their primary paragenetic relations were confirmed by examining their mode of occurrences as inclusion species in major silicate minerals and the phase relations in the Cu-Fe-S system, though their parageneses changed in cooling of the rocks. This makes it possible to estimate the fugacities of oxygen and sulfur in the granitic rocks based upon their paragenetic relations, and to discuss the nature of volatiles in the granitic rocks. Significant subsolidus reactions for sulfide minerals continued until the rocks cooled below 300° C and took place in two types of mineral grains, in groundmass and as inclusions. The removal of sulfur and copper through the silicate crystals was too easy to preserve the chemistry of sulfides included in silicates.     

The eastern and western ends of Nankai Trough: results of Box 5 and Box 7 Kaiko survey

Seabeam mapping and detailed geophysical surveying have been conducted over the Nankai Trough where the fossil Shikoku Ridge is subducted below southwest Japan. The geometry of the oceanic lithosphere bending under the margin as well as the three-dimensional structure of the accretionary prism have thus been determined in detail. Three 350° trending, probably transform faults have been identified in the area of the survey. They do not extend further south and appear to be limited to the last phase of spreading within the Shikoku Basin, probably between 15 and 12 Ma; this last phase of spreading would then have been accompanied by a sharp change in spreading direction from east-west to N 350°. The two eastern transform faults limit a zone of reduced Nankai trench fill of turbidites opposite to the Tosa Bae Embayment. This observation suggests that the Tosa Bae Embayment actually results from this reduced supply of trench fill to the imbricate thrusting process. The accretionary prism can be divided into three different tectonic provinces separated by continuous mappable thrusts, the Lower and Upper Main Thrusts. Surface shortening is limited to the lower accretionary prism south of the Upper Main Thrust (UMT) whereas uplift with possible extension characterizes the prism above the UMT. Deformation, due to the relative plate motion, mostly affects the lower accretionary prism south of the UMT.