A pump-sampler as a method of collecting plankton and its preliminary operation

A pump-sampler was designed to study the distribution of marine plankton and its possible relationship with the temperature and salinity of the water. Sea water was pumped up through a 2 inch diameter hose and plankton contained in it was collected on a filter cup (2 inches in diameter, 139 meshes/inch) without being damaged. The filter cup, when clogged by plankton organisms, was washed by spraying with about 100 cu. cm of water. The differences between two continuous with an interval of more than 3–4 seconds could be detected.A preliminary operation along a 2.82 km course in Maizuru Bay was carried out simultaneously with temperature-salinity measurements at sampling intervals of 30 m. Temperature was measured by a thermistor resistance thermometer, and salinity was measured by a salinometer with a subsample of water which was collected from an additional opening of the pump-sampler. The temperature-salinity record showed that four zones of water were characterized.It was found that wide variation of plankton counts indicated dense concentrations of particular species or group of species, and on the mesoscale it was possible to examine the size of the aggregation.     

Atmospheric correction scheme for GLI with absorptive aerosol correction

The present study proposes an atmospheric correction scheme for Advanced Earth Observation Satellite II (ADEOS-II)/Global Imager (GLI) ocean color retrieval that corrects for the atmospheric absorptive aerosol effect. Radiative transfer simulations were conducted assuming a non-absorptive model aerosol with a soot-type aerosol at various mixture ratios. The results indicate that while the spectral dependency of aerosol reflectance does not change in the longer (>550 nm) wavelength region, the reflectance at shorter wavelengths is highly variable and depends on the mixture ratio. The influence of aerosol absorption was also investigated using GLI data from ocean areas adjacent to Japan in the presence of absorptive Siberian fire smoke aerosol in the spring of 2003. The spectral curvature of the aerosol was estimated from the data obtained. An empirical, iterative scheme that detects and evaluates the influence of absorptive aerosols was developed by comparing 380 nm GLI-observed aerosol reflectance with predicted reflectances derived using an in-water optical model. To evaluate the performance of this scheme, satellite-derived normalized water-leaving radiances were compared with those measured from a ferry servicing Nagasaki and Fukue. The results of data acquired on March 20, 2003, indicate that this absorption correction scheme improved root mean square estimation error for normalized water-leaving radiance by approximately 40% in the 380, 400, and 412 nm bands. This atmospheric correction algorithm was used as a part of the second version of the GLI standard ocean color data process system at Japan Aerospace Exploration Agency (JAXA).     

Natural abundance of 15N in particulate organic matter in the North Pacific Ocean

The abundance of ¹⁵N in particulate organic matter in the euphotic layer of the North Pacific Ocean was investigated. δ¹⁵N values ranged from ?1.7 to +9.7% relative to atmospheric nitrogen. ¹⁵N contents in plankton samples collected in the central and northwestern North Pacific were inversely correlated with concentrations of NO^?₃. The ¹⁵N contents of Trichodesmium sp. (?1.7 to +0.5%) and associated Zooplankton (ca. + 2%) were low, suggesting the significance of nitrogen supply via molecular nitrogen fixation which is assumed to involve little isotope fractionation. The variation of ¹⁵N in particulate organic nitrogen in the euphotic layer of the ocean can be explained by biochemical isotope fractionation in the assimilation of nitrate and fixation of molecular nitrogen.     

A simple fractionation method for determination of phosphorus components in phytoplankton: Application to natural populations of phytoplankton in summer surface waters of Tokyo Bay

A simple procedure for fractionation of phosphorus components in natural populations of phytoplankton has been developed. By a combination of a trichloroacetic acid (TCA) extraction, a hot dilute acid treatment, a charcoal treatment and an organic solvent extraction, cellular phosphorus was divided into orthophosphate, nucleotide phosphorus, sugar phosphates, acid-soluble polyphosphates, lipid phosphorus, nucleic acid phosphorus, acid-insoluble polyphosphates, and residual phosphorus. The recovery of phosphorus was 94±5%. This technique was applied to natural populations of phytoplankton in summer surface waters of Tokyo Bay. Nucleic acid phosphorus and orthophosphate were most abundant, and accounted for 30 to 50% of total phytoplankton phosphorus. The nucleic acid phosphorus was proportional to the biomass of phytoplankton, irrespective of ambient nutrient concentrations. The orthophosphate showed the largest change in association with the change in cellular phosphorus content as well as in ambient phosphate. The orthophosphate serves as a phosphorus reserve in the natural populations of phytoplankton in summer surface waters of Tokyo Bay whereSkeletonema costatum was dominant. Acid-insoluble polyphosphates tended to increase when ambient concentration of phosphate was high, but their amounts were almost one order of magnitude lower than that of orthophosphate.     

Photographic monitoring system for observing heavy free-falling objects: Multi-stage design packages of radioactive waste

In the consideration of safety it is required that packages containing radioactive wastes when dumped at sea should keep their integrity and retain their contents until they reach the seabed. Packages containing simulated radioactive wastes (non-radioactive) were tested by a free-fall method at depthsca. 4,300 m in an area for dumping industrial waste off Shikoku Island. Since the weight of the largest package was 4,300 kg, special attention was paid to the connection of a buoyancy system with mooring rope. Descent and ascent velocities of the free-fall system were calculated prior to the experiment. A free-fall experiment with an extremely heavy object, heavier than ever previously reported, was accomplished without trouble by using the free-fall system. Recovery of a camera, flash-light, and other components was successful in each of the three experiments. Successive photographing of the package during descent was made and its integrity was observed using the photographs taken by the recovered camera. The packages remained intact during descent and at least for a short time after arrival on the seabed.     

Development of density measurement for metals at high pressures and high temperatures using X-ray absorption imaging combined with externally heated diamond anvil cell

A technique for density measurement under high pressure and high temperature was developed using the X-ray absorption imaging method combined with an externally heated diamond anvil cell. The densities of solid and liquid In were measured in the pressure and temperature ranges of 3.2–18.6 GPa and 294–719 K. The densities obtained through the X-ray absorption imaging method were in good agreement (less than 2.0% difference) with those obtained through X-ray diffraction. Based on the measured density, the isothermal bulk modulus of solid In is determined as 48.0 ± 1.1?40.9 ± 0.8 GPa at 500 K, assuming K′ = 4 to 6. The compression curve of liquid In approaches that of solid In at higher pressures and does not cross over the solid compression curve in the measurement range. The present technique enables us to determine the densities of both solids and liquids precisely in a wide pressure and temperature range.     

Swelling of a lava plug associated with a Vulcanian eruption at Sakurajima Volcano,Japan, as revealed by infrasound record: case study of the eruption on January 2, 2007

In order to clarify the time relation of the expansion of a gas pocket and failure of its overlying plug of lava during Vulcanian eruptions, infrasound records and video images of the Vulcanian eruption that occurred at Sakurajima volcano on January 2, 2007 were analyzed with respect to their origin times. Weak (≤3 Pa) and slowly increasing air pressure preceded the impulsive compression phase by 0.25–0.32 s, and a longer-period rarefaction phase of infrasound waves was recognized at all microphone stations. The velocity of the compression phase was assumed to be supersonic (ca. 400 m/s) up to 850 m above the crater bottom from other recent explosions. On the other hand, the propagation velocity of the preceding weak signal was regarded to be similar to the air sound velocity because the lack of impulsiveness is unlikely to be related to the main compression phase. Therefore, the estimated origin time of the main compression phase was delayed by 0.5–0.7 s from the preceding phase. The origin time of the preceding phase coincided with the onset of the isotropic expansion process of the pressurized gas pocket, which was obtained by the waveform inversion of the explosion earthquake. In contrast, the origin time of the main impulsive phase coincided with the time when the expansion rate reached its peak. This observation suggests that the volumetric increase of the gas pocket caused swelling of the surface of the crater bottom and its subsequent failure. When the expansion velocity exceeded a threshold level, the main impulsive compression phase radiated with a high velocity by the sudden releases of the pressurized gases. The volumetric change at the source was estimated to be 280–560 m³ from the preceding phase of the infrasound. This volume change indicates that the vertical displacement of the swelling ground was on the order of 1.0 m, assuming the radius of the lava plug was ca. 10 m.     

Biweekly periodic variation of the Kuroshio axis northeast of Taiwan as revealed by ocean high-frequency radar

An analysis of surface current data obtained from 2002 to 2005 using long-range high-frequency radar provides the first evidence for the presence of biweekly (11–14 day) periodic variations of the Kuroshio axis northeast of Taiwan. This analysis clarifies the spatiotemporal characteristics of these variations and reveals that cyclonic/anticyclonic eddies propagating along the shelf slope from the vicinity of the deep channel east of Taiwan induce these variations northeast of Taiwan. The behavior of the cyclonic/anticyclonic eddies on the shelf slope is well explained by 2nd-mode interior shelf waves advected by the Kuroshio's mean flow. Remote effects from the vicinity of the deep channel east of Taiwan, or from outside the East China Sea, are believed to play an important role in the generation of these biweekly periodic variations of the Kuroshio axis northeast of Taiwan. Moreover, on the shelf slope, these variations cause an onshore current across the shelf slope, suggesting topographically controlled upwelling. Therefore, the biweekly periodic variations of the Kuroshio axis northeast of Taiwan might contribute not only to the onshore transport of Kuroshio surface water but also to transport nutrient-rich Kuroshio subsurface water onto the shelf in the East China Sea.     

Characterization of low-temperature pyroclastic surges that occurred in the northeastern Japan arc during the late 19th century

Three eruption events occurring in the central part of the northeastern Japan arc were investigated and compared: Adatara AD1900, Zao AD1895, and Bandai AD1888. Producing low-temperature (LT) pyroclastic surges, these events are characterized by steam eruptions ejecting no juvenile material. These eruptions' well-preserved eruptive deposits and facies facilitated granulometric analyses of the beds, which revealed the transport and deposition mechanisms of LT surges. Combining these results with those of investigations of documents reporting the events, we correlated each eruption to the relevant individual bed and reconstructed the LT surge development sequence. Important findings related to the transport and deposition modes are the following. (1) Bed sets consisting of thin, laminated ash and its overlying thick massive tuff were recognized in the Adatara 1900 proximal deposits. The bed set was probably produced by a strong wind that discharged and propagated quickly from the vent (leading wind) and a gravitationally segregated, highly concentrated flow originated from the eruption column, within a discrete eruption episode. A similar combination might have occurred during the first surge of the Bandai 1888 event. (2) Comparison of the proximal and distal facies for the largest eruption of Adatara 1900 event indicates that the initial turbulence of the eruption cloud decreased rapidly, transforming into a density-stratified surge with a highly concentrated part near the base. Similar surges occurred in the climatic stage of Zao 1895. (3) Bandai 1888 ejecta indicate massive beds deposited preferentially at topographic lows. Co-occurring planar beds showed no topographic affection, as indicated by the topographic blocking of a stratified surge. The observed facies–massive tuffs, crudely stratified tuffs, and thin bedded tuffs–are compatible with those for high-temperature surges. At Bandai, absence of dune bedded tuffs and commonly poorer sorting in the LT surge deposits might be attributable to poor thermally induced turbulence of eruption columns. Condensation of vapor in the surges might have contributed to the poor sorting. The estimated explosion energies were 6 × 10¹³ J for Adatara AD1900, 6.5 × 10¹⁰ J for Zao AD1895, and 6.5 × 10¹⁵ J for Bandai AD1888, implying that the three events were hydrothermal eruptions with distinctive eruptive mechanisms. Regarding eruption sources, the Adatara 1900 event was caused solely by thermal energy of the hydrothermal fluid, although magma intrusion likely triggered evolution of hydrothermal systems at Zao in 1895. Steam eruptions in the Bandai 1888 event occurred simultaneously with sudden exposure of the hydrothermal system, whose triggers require no internal energy.     

Green’s function approach for calibrating tides in a circulation model for the East Asian marginal seas

A simple effective method of inverse estimation provided by model Green’s functions is examined to calibrate tides in a regional circulation model for the East Asian marginal seas. The Green’s function optimization derived by perturbing the model parameters significantly improves the estimate relative to observation as compared with baseline integration. Among the optimized model parameters, the largest effects on cost function reduction come first from the harmonic constant of M₂ along the open boundaries with the optimized values of 89.7 ± 0.8% for amplitude, and second from the bottom friction with the optimized value of (3.06 ± 0.08) × 10⁻³.