Experimental implementation and verification of multi‐degrees‐of‐freedom effective force testing

This paper presents an experimental implementation and verification of multi‐degrees‐of‐freedom effective force testing (MDOF‐EFT). An experimental setup that consists of a two‐degrees‐of‐freedom structural system and two hydraulic actuators at the Johns Hopkins University was utilized in this study. First, experimental system identification was performed to develop compatible analytical models for the multi‐input and multi‐output systems. Dynamics of the control plant, that is, the valve‐to‐force relations, were modeled with a rational polynomial transfer function matrix and delay components. By using the analytical model, a centralized decoupling loop‐shaping force feedback controller was designed such that the forces are uncoupled and the loop transfer functions have desirable dynamic characteristics in the frequency domain. Then, a series of harmonic force and earthquake simulation tests were performed to assess capabilities and limitations of MDOF‐EFT. Experimental results showed that the dynamic forces in the two actuators were accurately controlled to provide tracking while the system was stable and robust for the entire period of the experiment. Furthermore, earthquake simulation tests with increased levels of the reference forces demonstrated the feasibility of MDOF‐EFT with highly nonlinear test structures. Copyright © 2013 John Wiley & Sons, Ltd.     

Substructure shake table test method using a controlled mass: formulation and numerical simulation

This study proposes a new substructure shake table test method that allows for experimental investigation of the lower portion of structures while the upper part is numerically analyzed. Compatibility conditions are derived to ensure that the dynamic characteristics of the substructured system are equivalent to the reference entire structure. This method utilizes controlled masses to incorporate interface forces from the computational substructure to the experimental substructure. A feasible implementation procedure for the interface force compatibility is developed using a series of conversions and signal processing. For validation of the capabilities and limitations of the proposed substructure method, numerical simulations are performed using detailed models including dynamics of the controlled mass systems. Results from the numerical simulations showed that the proposed substructure method produced comparable results to the reference entire simulations. The average error between top floor displacements produced by substructured and entire responses for earthquake inputs was 7.1%. Numerical studies showed that the substructure method has potential to serve as an alternative to shaking table tests of entire structures. Copyright © 2012 John Wiley & Sons, Ltd.     

(Au,Ag)Te2 Minerals from Epithermal Gold Deposits in Japan

Chemical composition and mode of occurrences of (Au, Ag)Te₂ minerals such as calaverite (AuTe₂), sylvanite (AuAgTe₄) and krennerite ((Au, Ag)Te₂) in epithermal gold telluride ores from Suzaki, Kawazu and Teine are examined. In the ores from Suzaki, (Au, Ag)Te₂ minerals occur in microbands of tellurides and fine quartz. The minerals in telluride bands change from krennerite, via calaverite‐native tellurium, to sylvanite, in the order of crystallization. A sample from Kawazu contains sylvanite and native tellurium with stutzite, hessite and tetradymite in the coarser gray quartz part. The Teine sample also contains sylvanite and native tellurium with barite and quartz. The peak patterns of XRD of calaverite, krennerite and sylvanite from Suzaki are almost identical to that of JCPDS 43–1472, JCPDS 8–20 and JCPDS 9–477, respectively. The Te, Au, Cu, and Ag contents of calaverite from Suzaki range from 56.4 to 57.9 wt.%, from 41.6 to 42.6 wt.%, from 0.28 to 0.45 wt.% and from 0.14 to 0.31 wt.%, respectively, corresponding to the formula Au_0.97Ag_0.01Cu_0.02Te₂. The Te, Au, Ag, and Cu contents of krennerite from Suzaki range from 59.6 to 61.4 wt.%, from 31.3 to 33.6 wt.%, from 4.91 to 6.13 wt.% and from 0.66 to 0.80 wt.%, respectively, corresponding to the formula Au_0.71Ag_0.22Cu_0.05Te₂ with Au and Ag ranging from 0.68 to 0.74 and from 0.20 to 0.25, respectively. The Te, Au, Ag, and Cu contents of sylvanite from Suzaki range from 61.5 to 63.4 wt.%, from 24.1 to 27.4 wt.%, from 10.0 to 12.5 wt.% and from 0.00 to 0.12 wt.%, respectively. The Te, Au, Ag, and Cu contents of sylvanite from Kawazu range from 62.7 to 63.3 wt.%, from 23.5 to 24.1 wt.%, from 12.0 to 12.5 wt.% and from 0.09 to 0.16 wt.%, respectively. The Te, Au, Ag, Cu and Fe contents of sylvanite from Teine range from 61.8 to 63.5 wt.%, from 23.6 to 24.7 wt.%, from 11.9 to 13.3 wt.%, from 0.01 to 1.65 wt.% and from 0.00 to 0.02 wt.%, respectively. The average formulae of sylvanite from Suzaki, Kawazu, and Teine are expressed as Au_1.06Ag_0.94Cu_0.02Te₄, Au_1.00Ag_0.95Cu_0.02Te₄ and Au_1.01Ag_0.95Cu_0.06Te₄, respectively. Judging from the mineral assemblages of these ores and other localities, Au–Te mineralization in the Japanese Islands can be divided into four types: native gold–calaverite at Date and Agawa, krennerite(?native tellurium) at Osore‐zan and Mutsu, sylvanite–native tellurium–hessite at Teine, Kawazu, Kobetsuzawa, and Kato, and polyminerallic assemblages at Suzaki and Kushikino. The pH–Eh diagram of aqueous tellurium species and tellurium minerals at 250°C indicates that (Au, Ag)Te₂ minerals in epithermal gold telluride mineralization would have been formed under middle to low Eh and acidic (to intermediate) pH conditions. It is possible that dilute tellurium‐containing fluid would scavenge dilute gold.     

Environmental controls on phytoplankton production in coastal ecosystems: A case study from Tokyo Bay

Phytoplankton biomass and primary production were examined in their environmental context, for a semi-enclosed bay (Tokyo Bay, Japan) using data from monthly samples collected over a three-year period. Heavy precipitation and high surface temperatures in the late spring and summer gave rise to a highly-stratified water-column and stimulated a series of phytoplankton blooms, whereas during the winter, a weakly-stratified and deeply-mixed water-column led to a rapid decline in phytoplankton biomass under light-limited growth conditions. By incorporating pigment, photophysiological and optical data into a primary production model we show that daily, water-column primary production ranges from ∼160 mg C m⁻² d⁻¹ to 7600 mg C m⁻² d⁻¹. High water turbidity and deep vertical mixing, both separately and in concert, limit the light available for algal growth over much of the year. Annual primary production varied from 370 to 580 g C m⁻² y⁻¹. The relative influences of nutrient limitation and light limitation are assessed. A model is developed that describes this in an explicit manner using photophysiological parameters.     

Comparison of stable isotopes,ratios of Cl/Cl and I/I in brine and deep groundwater from the Pacific coastal region and the eastern margin of the Japan Sea

Fifty-three samples, including brines associated with oil and natural gas reservoirs and groundwater samples from deep boreholes, were collected from the Pacific and Japan Sea coastal regions in Japan. The ¹²⁹I/¹²⁷I and ³⁶Cl/Cl ratios, and stable isotopes (δD and δ¹⁸O) are compared to investigate differences related to the geotectonic settings of the two regions. The δD and δ¹⁸O data indicate that brine and groundwater from the Pacific coastal region reflect mixing of meteoric water with connate seawater in the pores of sedimentary rocks. On the other hand, brine and groundwater from the Japan Sea coastal region have been hydrothermally altered. In particular, brines associated with petroleum accumulations at Niigata and Akita showed the same isotopic characteristics as fluids found in the Kuroko deposits of the Green Tuff region in northeastern Japan. There is little difference in the ³⁶Cl/Cl ratios in brine and groundwater from the Pacific and Japan Sea coasts. Most brine and some deep groundwater, except those from the Pleistocene Kazusa Group, have already reached the average secular equilibrium ratio of 9.9 ± 2.7 × 10⁻¹⁵ for their mudstone and sandstone reservoirs. There was no correlation between the ³⁶Cl/Cl ratios and differences in geotectonic setting between the Pacific and the Japan Sea coast. The molar I/Br ratio suggests that the I in all of water samples was of biogenic origin. The average ¹²⁹I/¹²⁷I ratio was 290 ± 130 × 10⁻¹⁵ to 294 ± 105 × 10⁻¹⁵ in both regions, showing no relationship to the different geotectonic settings. The uncontaminated brine and groundwater samples are likely to have retained the original ¹²⁹I/¹²⁷I ratios of marine I released from the old organic matter stored in sedimentary rock.     

Interannual variations of the occurrence of epipelagic fish in the diets of the seabirds breeding on Teuri Island, northern Hokkaido, Japan

The diets of breeding seabirds can be a good monitor of marine environmental changes. From 1984 to 2001 we monitored the diets of black-tailed gulls (Larus crassirostris) (“surface foragers”), rhinoceros auklets (Cerorhinca monocerata) (“epipelagic divers”), and Japanese cormorants (Phalacrocorax filamentotus) (“bottom divers”) that breed on Teuri Island at the northern boundary of the Tsushima Warm current in the Sea of Japan/East Sea. Between 1984 and 1987, both the gulls and the auklets foraged on the sardine (Sardinops melanostictus), but after 1992, they switched to the anchovy (Engraulis japonica). This change might reflect the collapse of the sardine stock in the late 1980s. In the 1990s, the year-to-year variations of the percentage of anchovy in the diets of the three seabird species showed similar trends: High in 1994 and 1998–2001; and low in 1992–1993 and 1995–1997. The estimated stock size of the anchovy population in the Tsushima Current area was positively correlated with the percentage of mass of anchovy in the seabirds’ diets. Thus, the short-term annual changes of the total anchovy availability, which might reflect SST or the volume transport of Tsushima Current, possibly affected the seabirds diets on this island.     

Feeding Strategy of Japanese Sand Lance Larvae in Relation to Ciliated Protozoa in the Vicinity of a Thermohaline Front

Larval feeding and survival strategies are described on a Japanese sand lance, Ammodytes personatus Girard, collected in the vicinity of a thermohaline front in the Ise Bay, in comparison with those of other predominant larvae, Hexagrammos spp. and Sebastiscus marmoratus (Cuvier). First-feeding A. personatus larvae (3.1–3.9 mm NL) fed primarily on tintinnid ciliates, subsequently switching to copepod nauplii (4.0–7.9 mm NL larvae) and post-naupliar copepods (8.0–11.3 mm NL larvae). First-feeding Hexagrammos spp. larvae (6.5–6.9 mm NL) fed primarily on post-naupliar copepods, and first-feeding S. marmoratus larvae (<4.0 mm NL), mostly on copepod nauplii. The different food preferences of these species at first-feeding were related to their different mouth widths (0.15–0.19, 0.52–0.56 and 0.32–0.40 mm, respectively) and/or body size (3.1–3.9, 6.5–6.9 and 3.2–3.9 mm NL, respectively). Ciliate-feeding by first-feeding A. personatus larvae was strongly related to the convergence of the larvae and their prey near the thermohaline front, densities of both being greater on the inshore side of the frontal zone. In conclusion, the aggregation of ciliates near the thermohaline front may have improved feeding conditions and survival of first-feeding A. personatus larvae.     

Observation of the bottom boundary layer on the continental shelf

Current meter data from various depths near the sea bottom collected for 31 days at time intervals of 10 minutes using a subsurface buoy system at a depth at 38 m on the continental shelf off Akita, Japan have been analyzed. The results show the existence of a stationary Ekman layer. The typical range of the characteristic parameters are estimated as follows; friction velocity: 0.38 cm s^–1; Ekman layer thickness: 16 m; logarithmic layer thickness: 4 m–6 m; constant flux layer thickness: 0.4–0.6 m; Ekman veering: 28.7°; drag coefficient: 0.24×10^–2–0.53×10^–2. Veering was also observed in the logarithmic layer.     

Mechanical response of the south flank of kilauea volcano, hawaii, to intrusive events along the rift systems

Increased earthquake activity and compression of the south flank of Kilauea volcano, Hawaii, have been recognized by previous investigators to accompany rift intrusions. We further detail the temporal and spatial changes in earthquake rates and ground strain along the south flank induced by six major rift intrusions which occurred between December 1971 and January 1981. The seismic response of the south flank to individual rift intrusions is immediate; the increased rate of earthquake activity lasts from 1 to 4 weeks. Horizontal strain measurements indicate that compression of the south flank usually accompanies rift intrusions and eruptions. Emplacement of an intrusion at a depth greater than about 4 km, such as the June 1982 southwest rift intrusion, however, results in a slight extension of the subaerial portion of the south flank.Horizontal strain measurements along the south flank are used to locate the January 1983 east-rift intrusion, which resulted in eruptive activity. The intrusion is modeled as a vertical rectangular sheet with constant displacement perpendicular to the plane of the sheet. This model suggests that the intrusive body that compressed the south flank in January 1983 extended from the surface to about 2.4 km depth, and was aligned along a strike of N66°E. The intrusion is approximately 11 km in length, extended beyond the January 1983 eruptive fissures, which are 8 km in length and is contained within the 14-km-long region of shallow rift earthquakes.