Isostasy of the Northern Bay of Biscay Continental Margin

Summary. Spectral analysis of eight marine gravity profiles and seven SEASAT profiles, combined with corresponding bathymetric data over the Northern Bay of Biscay origin, yield identical admittance functions for wavelengths greater than 120 km. the resulting admittance function has been interpreted in terms of an Airy model of compensation for wavelengths greater than 250 km and in terms of an elastic plate model of compensation for shorter wavelengths. the Airy model corresponds to a crustal thickness variation across the margin. the plate model with an elastic thickness of 8 km is associated with the regional compensation of a sedimentary load which was probably emplaced during and just after rifting.     

Mechanical properties and time-dependent behaviour of sand-granulated rubber mixtures

The use of granulated recycled rubber as a lightweight material in civil engineering applications has been widely growing over the past 20 years. Processed waste tires mixed with soils have been introduced as lightweight fills for slopes, retaining walls, and embankments. It has also been considered as a damping material under foundations in seismic zones. Understanding the properties of sand-rubber mixtures is essential to evaluate its performance in geotechnical applications. Isotopically consolidated drained (CD) triaxial tests were conducted to investigate the effect of rubber size, content and saturation condition on the mechanical properties of sand-rubber mixtures. Moreover, the compressibility of the sand-rubber mixtures under sustained loading was investigated through one dimensional consolidation tests. The unit weight, shear strength and stiffness of sand-rubber mixtures decreased whereas deformability increased at increased rubber content. A non-linear stress-strain response was observed, that changed from brittle to ductile behaviour at increased rubber content. Sand-rubber mixtures, under one dimensional loading, exhibited significant settlement that increased as rubber content increased.     

Hybrid Foundation System for Offshore Wind Turbine

The demand on green and clean energy is increasing all over the world. This urge us to try to reduce the obstacles in this field. One of the main obstacles is the high cost of offshore foundation system of wind turbines. A novel offshore hybrid foundation system is proposed for large offshore wind turbines to try to reduce the construction cost. This new system consists of circular precast concrete plate connected on site (i.e. offshore) to a steel monopole that is smaller than the usual pile size used. Parametric study for different foundations systems including monopiles had been done. The displacements at different locations of the foundation and the rotation at the pile head were analyzed and evaluated using a 3D nonlinear finite element model under field-like loading conditions considering different foundation configurations. This work paves the way for the development of design guidelines for this novel foundation system in offshore wind turbine applications.     

A menagerie of graphite morphologies in the Acapulco meteorite with diverse carbon and nitrogen isotopic signatures: Implications for the evolution history of acapulcoite meteorites

Morphologies, petrographic settings and carbon and nitrogen isotopic compositions of graphites in the Acapulco meteorite, the latter determined by secondary ionization mass spectrometry, are reported. Seven different graphite morphologies were recognized, the majority of which occur enclosed exclusively in kamacite. Individual graphite grains also rarely occur in the silicate matrix. Kamacite rims surrounding taenite cores of metal grains are separated from the Ni-rich metal cores by graphite veneers. These graphite veneers impeded or prevented Ni-Fe interdiffusion during cooling. In addition, matrix FeNi metal contains considerable amounts of phosphorous (≈ 700 ppm) and silicon (≈ 300 ppm) (Pack et al., 2005 in preparation) thus indicating that results of laboratory cooling experiments in the Fe-Ni binary system are inapplicable to Acapulco metals. Graphites of different morphologies display a range of carbon and nitrogen isotopic compositions, indicating a diversity of source regions before accretion in the Acapulco parent body. The isotopic compositions point to at least three isotopic reservoirs from which the graphites originated: (1) A reservoir with heavy carbon, represented by graphite in silicates (δ¹³C = 14.3 ± 2.4 ‰ and δ¹⁵N = −103.4 ± 10.9 ‰), (2) A reservoir with isotopically light carbon and nitrogen, characteristic for the metals. Its C- and N-isotopic compositions are probably preserved in the graphite exsolutions that are isotopically light in carbon and lightest in nitrogen (δ¹³C = −17 to −23 ‰ δ¹⁵N = −141 to −159 ‰). (3) A reservoir with an assumed isotopic composition (δ¹³C ∼ −5 ‰; δ¹⁵N ∼ −50 ‰). A detailed three-dimensional tomography in reflected light microscopy of the decorations of metal-troilite spherules in the cores of orthopyroxenes and olivines and metal-troilite veins was conducted to clarify their origin. Metal and troilite veins are present only near the fusion crust. Hence, these veins are not pristine to Acapulco parent body but resulted during passage of Acapulco in Earth’s atmosphere. A thorough search for symplectite-type silicate-troilite liquid quench textures was conducted to determine the extent of closed-system partial silicate melting in Acapulco.Metal-troilite spherules in orthopyroxenes and olivines are not randomly distributed but decorate ferromagnesian silicate restite cores, indicating that the metal-spherule decoration around restite silicates took place in a silicate partial melt. Graphite inclusions in these spherules have C- and N- isotopic compositions (δ¹³C = −2.9 ± 2.5 ‰ and δ¹⁵N = −101.2 ± 32 ‰) close to the average values of graphite in metals and in the silicate matrix, thus strongly suggesting that they originated from a mixture of graphite inclusions in metals and silicate matrix graphite during a closed system crystallization process subsequent to silicate-metal-sulfide partial melting. Troilite-orthopyroxene quench symplectite textures in orthopyroxene rims are clear evidence that silicate-sulfide partial melting took place in Acapulco. Due to petrographic heterogeneity on a centimeter scale, bulk REE abundances of individual samples or of individual minerals provide only limited information and the REE abundances alone are not entirely adequate to unravel the formational processes that prevailed in the acapulcoite-lodranite parent body. The present investigations demonstrate the complexity of the evolutionary stages of acapulcoites from accretion to parent body processes.     

Propagation of guided waves in a fluid layer bounded by two viscoelastic transversely isotropic solids

The analysis of Stoneley wave propagation in a fracture is essential for the identification and evaluation of fracture parameters from the borehole Stoneley wave. Also, it is important for many geophysics considerations, e.g. for tremor and long-period events observed in volcanoes and geothermal areas. In this paper, we investigate the guided waves propagation in a fluid layer lying between two viscoelastic vertically transversely isotropic media. The viscoelastic mechanism models the attenuation due to the presence of fluid saturation in the rock. A model based on the superposition of three inhomogeneous partial plane waves: one in the fluid and two heterogeneous waves in the solid is developed. The dispersion equation is obtained for this case. A numerical solution is carried out to obtain the guided wave velocity and attenuation coefficient. The results of this investigation show that there is a strong correlation between the velocity dispersion and attenuation of Stoneley wave and the anisotropic parameters of the medium especially in a sandstone (fast) medium.     

Improving the existing roadway tunnels capacity by adding new tunnels—a structural approach

The roadway tunnel is considered a good solution for the success of modern roadway networks. It can help to overcome possible traffic congestion and considerably reduce journey time. The continuous growth of traffic volumes leads to increase congestion and decrease safety. This leads to the need for extra tunnel space. The extra tunnel space can be achieved either by the widening of the existing tunnel or by adding a new one. The choice of the suitable method is dependent on many factors like tunnels alignment, site conditions, construction method, tunnel operation, risk assessment…etc. The current research investigates the second alternative through a specific case study as an example. The method comprises adding two new tunnels to an existing twin roadway tunnels. The investigated problem considers the new tunnels to be added vertically or horizontally. The influence of the new tunnel construction on the existing tunnels is investigated considering both the variation of relative position and spacing distance in a parametric study context. Several numerical models are employed to check the construction sequence and the tunnelling safety. These models are used to evaluate the induced stresses in surrounding ground for two different soil types, straining actions in tunnels’ liner and deformations of both ground and liner. The result demonstration shows how to find out the minimum practical and safe spacing distance between the driven new tunnels and the existing ones without the need for the relatively expensive soil strengthening techniques.     

Generation and expulsion of oils from Permian coals of the Sydney Basin,Australia

Organic geochemical and petrological assessment of coals/coaly shales and fine grained sediments, coupled with organic geochemical analyses of oil samples, all from Permo–Triassic sections of the Southern Sydney Basin (Australia), have enabled identification of the source for the widely distributed oil shows and oil seeps in this region. The Permian coals have higher hydrogen indices, higher liptinite contents, and much higher total organic matter extract yields than the fine grained sediments. A variety of source specific parameters obtained from n-alkanes, regular isoprenoids, terpanes, steranes and diasteranes indicate that the oil shows and seeps were generated and expelled predominantly from higher plant derived organic matter deposited in oxic environments. The source and maturity related biomarkers and aromatic hydrocarbon distributions of the oils are similar to those of the coals. The oil-coal relationship also is demonstrated by similarities in the carbon isotopic composition of the total oils, coal extracts, and their individual n-alkanes. Extracts from the Permo–Triassic fine grained sediments, on the other hand, have organic geochemical signatures indicative of mixed terrestrial and prokaryotic organic matter deposited in suboxic environments, which are significantly different from both the oils and coal extracts. The molecular signatures indicating the presence of prokaryotic organic matter in some of the coal extracts and oils may be due to thin sections of possibly calcareous lithologies interbedded within the coal measures. The genetic relationship between the oils and coals provides new evidence for the generation and expulsion of oils from the Permian coals and raises the possibility for commercial oil accumulations in the Permian and Early Triassic sandstones, potentially in the deeper offshore part of the Sydney Basin.     

Application of Large‐Scale Inversion Algorithms to Hydraulic Tomography in an Alluvial Aquifer

Large‐scale inversion methods have been recently developed and permitted now to considerably reduce the computation time and memory needed for inversions of models with a large amount of parameters and data. In this work, we have applied a deterministic geostatistical inversion algorithm to a hydraulic tomography investigation conducted in an experimental field site situated within an alluvial aquifer in Southern France. This application aims to achieve a 2‐D large‐scale modeling of the spatial transmissivity distribution of the site. The inversion algorithm uses a quasi‐Newton iterative process based on a Bayesian approach. We compared the results obtained by using three different methodologies for sensitivity analysis: an adjoint‐state method, a finite‐difference method, and a principal component geostatistical approach (PCGA). The PCGA is a large‐scale adapted method which was developed for inversions with a large number of parameters by using an approximation of the covariance matrix, and by avoiding the calculation of the full Jacobian sensitivity matrix. We reconstructed high‐resolution transmissivity fields (composed of up to 25,600 cells) which generated good correlations between the measured and computed hydraulic heads. In particular, we show that, by combining the PCGA inversion method and the hydraulic tomography method, we are able to substantially reduce the computation time of the inversions, while still producing high‐quality inversion results as those obtained from the other sensitivity analysis methodologies.     

Isotopic variations of oxygen and hydrogen in groundwater of carbonate aquifer in an arid environment

The stable isotopic characteristics were used together with the total chloride to assess changes in groundwater from recharge zones into the carbonate aquifer in an arid environment. The aquifer under study represents a major source of groundwater and thermal springs in Al-Ain city, which are located at the northern part of Jabal Hafit in the United Arab Emirates (UAE). The relationship between oxygen and hydrogen isotopic composition of groundwater is established and is described by δD?=?2.2δ¹⁸O???9.96. The lower slope and y-intercept of groundwater samples relative to the local meteoric waterline suggests that the isotopic enrichment is due to the evaporation of shallow groundwater after recharge occurs. The majority of the shallow groundwater samples have a negative deuterium excess (d-excess) which might be ascribed to high a degree of evaporation, while most of the groundwater samples from deep wells, have a positive value of d-excess which may be related to a low degree of evaporation. The δ¹⁸O values of the thermal waters suggest enrichment towards δ¹⁸O of the carbonate rocks because of the exchange with oxygen at higher temperatures. A possible mixing between thermal or hot water and shallow groundwater is evident in some samples as reflected by δD vs. Cl and d-excess vs. δ¹⁸O plots.     

Fluid inclusions in chromite from a pyroxenite dike of the Pindos ophiolite complex

Chromitite occurrences in the Pindos ophiolite complex are located in elongated dunite bodies hosted in harzburgite of the mantle sequence, and show a compositional variation from high-Al to high-Cr type. Although the majority of the chromite ores is characterized by paucity in fluid inclusions, abundant fluid inclusions were found in chromite hosted by a coarse-grained pyroxenite dike at the Spanos Valley, Pindos complex. Chromite occurs in highly variable proportion in an orthopyroxene matrix or as inclusions in orthopyroxenes. Its composition is homogeneous and has an average Cr/(Cr+Al) ratio 0.73.The investigation of chromitites revealed the presence of primary and secondary fluid inclusions. The primary inclusions are of following types: Three-phase solid-liquid-gas, three-phase liquid-liquid-gas, two-phase liquid-gas and one-phase octahedron crystal-shaped. The secondary fluid inclusions are two-phase liquid-gas and mono-phase fluid inclusions.The presence of fluid inclusions in chromite aggregates hosted in orthopyroxenite dikes, in combination with the trace element contents in chromite concentrates and the mineralogical composition of the dikes may indicate that an aqueous phase separated from the magma.