On the linear elastic responses of the 2D bonded discrete element model

The bonded discrete element model (DEM) is a numerical tool that is becoming widely used when studying fracturing, fragmentation, and failure of solids in various disciplines. However, its abilities to solve elastic problems are usually overlooked. In this work, the main features of the 2D bonded DEM which influence Poisson's ratio and Young's modulus, and accuracy when solving elastic boundary value problems, are investigated. Outputs of numerical simulations using the 2D bonded DEM, the finite element method, a hyper elasticity analysis, and the distinct lattice spring model (DLSM) are compared in the investigation. It is shown that a shear interaction (local) factor and a geometric (global) factor are two essential elements for the 2D bonded DEM to reproduce a full range of Poisson's ratios. It is also found that the 2D bonded DEM might be unable to reproduce the correct displacements for elastic boundary value problems when the represented Poisson's ratio is close to 0.5 or the long-range interaction is considered. In addition, an analytical relationship between the shear stiffness ratio and the Poisson's ratio, derived from a hyper elasticity analysis and applicable to discontinuum-based models, provides good agreement with outputs from the 2D bonded DEM and DLSM. Finally, it is shown that the selection of elastic parameters used the 2D bonded DEM has a significant effect on fracturing and fragment patterns of solids.     

Edge-to-Stem Variability in Wet-Canopy Evaporation From an Urban Tree Row

Evaporation from wet-canopy (\(E_\mathrm{C}\)) and stem (\(E_\mathrm{S}\)) surfaces during rainfall represents a significant portion of municipal-to-global scale hydrologic cycles. For urban ecosystems, \(E_\mathrm{C}\) and \(E_\mathrm{S}\) dynamics play valuable roles in stormwater management. Despite this, canopy-interception loss studies typically ignore crown-scale variability in \(E_\mathrm{C}\) and assume (with few indirect data) that \(E_\mathrm{S}\) is generally \({<}2\%\) of total wet-canopy evaporation. We test these common assumptions for the first time with a spatially-distributed network of in-canopy meteorological monitoring and 45 surface temperature sensors in an urban Pinus elliottii tree row to estimate \(E_\mathrm{C}\) and \(E_\mathrm{S}\) under the assumption that crown surfaces behave as “wet bulbs”. From December 2015 through July 2016, 33 saturated crown periods (195 h of 5-min observations) were isolated from storms for determination of 5-min evaporation rates ranging from negligible to 0.67 \(\hbox {mm h}^{-1}\). Mean \(E_\mathrm{S}\) (0.10 \(\hbox {mm h}^{-1}\)) was significantly lower (\(p < 0.01\)) than mean \(E_\mathrm{C}\) (0.16 \(\hbox {mm h}^{-1}\)). But, \(E_\mathrm{S}\) values often equalled \(E_\mathrm{C}\) and, when scaled to trunk area using terrestrial lidar, accounted for 8–13% (inter-quartile range) of total wet-crown evaporation (\(E_\mathrm{S}+E_\mathrm{C}\) scaled to surface area). \(E_\mathrm{S}\) contributions to total wet-crown evaporation maximized at 33%, showing a general underestimate (by 2–17 times) of this quantity in the literature. Moreover, results suggest wet-crown evaporation from urban tree rows can be adequately estimated by simply assuming saturated tree surfaces behave as wet bulbs, avoiding problematic assumptions associated with other physically-based methods.     

Evaluating the influence of mixture composition on the kinetics of salt damage in wall paintings using time lapse video imaging with direct data annotation

This paper presents an examination of the timescale of phase transition behaviour of a series of salts known to cause damage to wall paintings and other cultural property. The rate of deliquescence and crystallisation of single salts (nitromagnesite and halite) under different RH regimes, and the extent to which this was affected when mixed with other salts (niter, nitratite and gypsum), was investigated. The study was conducted using simple conventional techniques (mass measurements over time) and also using an innovative new method: timelapse video imaging with online data annotation. The results demonstrate the synergy gained from combining video imaging with environmental data in reference to time in the study of salt phase changes: where it revealed new information concerning the kinetics of deliquescence and crystallisation. The implications of these results for the implementation of environmental control measures within historic buildings are discussed.

Unravelling the evolution of an Alpine to post-glacially active fault in the Swiss Alps

The Gemmi fault is a prominent NW–SE striking lineament that crosses the Gemmi Pass in the central Swiss Alps. A multidisciplinary investigation of this structure that included geological mapping, joint profiling, cathodoluminescence and scanning electron microscopy, stable isotope measurements, luminescence- and U-TH-dating, 3D ground penetrating radar (GPR) surveying and trenching reveals a history of fault movements from the Miocene to the Holocene. The main fault zone comprises a 0.5–3 m thick calcite cataclasite formed during several cycles of veining and brittle deformation. Displaced Cretaceous rock layers show an apparent dextral slip of 10 m along the fault.A detailed study of a small sediment-filled depression that crosses the fault provides evidence for a post-glacial reactivation of the fault. A trench excavated across the fault exposed a Late-Glacial-age loess layer and late Holocene colluvial-like slope-wash deposits that showed evidence for fault displacement of a few centimeters, indicating a recent strike-slip reactivation of the fault. Focal mechanisms of recent instrumentally recorded earthquakes are consistent with our findings that show that the fault at the Gemmi Pass, together with other parallel faults in this area, may be reactivated in today's stress field. Taking together all the observations of its ancient and recent activity, the Gemmi fault can be viewed as a window through geological space and time.     

Gonadal development in Japanese medaka (Oryzias latipes) exposed to 17 β-estradiol

The purpose of this research was to evaluate the Japanese medaka (Oryzias latipes) as an ecotoxicological model for the rapid evaluation of environmental estrogens. A novel short-term (48-h) exposure to 17 β-estradiol is proposed in development of a positive control for disruption of gonadal development. Recently hatched medaka fry (30 fry per dose group) with undifferentiated gonads were exposed to 4.0, 29.4, and 115.6 μg/liter of 17 β-estradiol (acetone carrier) for 48 h in a water bath at 25 °C. The fry were then grown-out in spring water for 2 weeks, killed, and processed for histological evaluation. High lethality was encountered during the grow-out period in the 115.6 μg/liter dose group. Fry in the spring water and acetone (carrier) control groups developed into females or males. Fry exposed to 17 β-estradiol developed primarily into females or had testis-ova.     

A method for uncertainty constraint of catchment discharge and phosphorus load estimates

River discharge and nutrient measurements are subject to aleatory and epistemic uncertainties. In this study, we present a novel method for estimating these uncertainties in colocated discharge and phosphorus (P) measurements. The “voting point”‐based method constrains the derived stage‐discharge rating curve both on the fit to available gaugings and to the catchment water balance. This helps reduce the uncertainty beyond the range of available gaugings and during out of bank situations. In the example presented here, for the top 5% of flows, uncertainties are shown to be 139% using a traditional power law fit, compared with 40% when using our updated “voting point” method. Furthermore, the method is extended to in situ and lab analysed nutrient concentration data pairings, with lower uncertainties (81%) shown for high concentrations (top 5%) than when a traditional regression is applied (102%). Overall, for both discharge and nutrient data, the method presented goes some way to accounting for epistemic uncertainties associated with nonstationary physical characteristics of the monitoring site.     

Evaluating new fault-controlled hydrothermal dolomitization models: Insights from the Cambrian Dolomite,Western Canadian Sedimentary Basin

Fault-controlled hydrothermal dolomitization in tectonically complex basins can occur at any depth and from different fluid compositions, including ‘deep-seated’, ‘crustal’ or ‘basinal’ brines. Nevertheless, many studies have failed to identify the actual source of these fluids, resulting in a gap in our knowledge on the likely source of magnesium of hydrothermal dolomitization. With development of new concepts in hydrothermal dolomitization, the study aims in particular to test the hypothesis that dolomitizing fluids were sourced from either seawater, ultramafic carbonation or a mixture between the two by utilizing the Cambrian Mount Whyte Formation as an example. Here, the large-scale dolostone bodies are fabric-destructive with a range of crystal fabrics, including euhedral replacement (RD1) and anhedral replacement (RD2). Since dolomite is cross-cut by low amplitude stylolites, dolomitization is interpreted to have occurred shortly after deposition, at a very shallow depth (<1 km). At this time, there would have been sufficient porosity in the mudstones for extensive dolomitization to occur, and the necessary high heat flows and faulting associated with Cambrian rifting to transfer hot brines into the near surface. While the δ¹⁸O_water and ⁸⁷Sr/⁸⁶Sr ratios values of RD1 are comparable with Cambrian seawater, RD2 shows higher values in both parameters. Therefore, although aspects of the fluid geochemistry are consistent with dolomitization from seawater, very high fluid temperature and salinity could be suggestive of mixing with another, hydrothermal fluid. The very hot temperature, positive Eu anomaly, enriched metal concentrations, and cogenetic relation with quartz could indicate that hot brines were at least partially sourced from ultramafic rocks, potentially as a result of interaction between the underlying Proterozoic serpentinites and CO₂-rich fluids. This study highlights that large-scale hydrothermal dolostone bodies can form at shallow burial depths via mixing during fluid pulses, providing a potential explanation for the mass balance problem often associated with their genesis.     

勘查植物地球化学在我国不同地球化学景观区的应用现状及展望

勘查植物地球化学是通过分析植物器官来获取成矿元素信息的地球化学方法。我国学者在干旱荒漠区、森林沼泽区、半干旱和湿润半湿润中低山景观区开展了系统的勘查植物地球化学试验,厘定了一批适用于勘查植物地球化学调查的植物,为该方法的推广及应用奠定了良好基础。今后应进一步加强对勘查植物地球化学异常产生的机理、勘查植物地球化学数据库及指南建立、勘查植物地球化学异常遥感应用等方面的研究,更好地利用勘查植物地球化学方法服务矿产勘查工作。     

Peroxymonosulfate Improves the Activity and Stability of Manganese Oxide for Oxidation of Arsenite to Arsenate

Manganese oxide has been widely investigated for oxidation of arsenite (As(III)) to arsenate (As(V)) due to its high redox potential; however, it becomes extremely unstable after reuse. Here, As(III) oxidation activity and stability of manganese oxide in the presence of peroxymonosulfate (PMS) is investigated. Batch experimental results reveal that manganese oxide/PMS exhibits high catalytic activity for As(III) oxidation compared to manganese oxide or PMS alone. Addition of PMS to manganese oxide not only reveals long‐term stability for As(III) oxidation, but also shows high As(III) oxidation activity in the presence of coexisting ions such as As(V) and phosphate. Quenching tests reveal that As(III) oxidation in the manganese oxide/PMS system is attributed to activation of PMS by manganese oxide at different oxidation states (Mn(III) and Mn(IV)), and the generation of sulfate radicals that are responsible for As(III) oxidation.