Diagenesis in the Middle Jurassic Khatatba Formation sandstones in the Shoushan Basin,northern Western Desert,Egypt

The Middle Jurassic Khatatba Formation acts as a hydrocarbon reservoir in the subsurface in the Western Desert, Egypt. This study, which is based on core samples from two exploration boreholes, describes the lithological and diagenetic characteristics of the Khatatba Formation sandstones. The sandstones are fine‐ to coarse‐grained, moderately to well‐sorted quartz arenites, deposited in fluvial channels and in a shallow‐marine setting. Diagenetic components include mechanical and chemical compaction, cementation (calcite, clay minerals, quartz overgrowths, and a minor amount of pyrite), and dissolution of calcite cements and feldspar grains. The widespread occurrence of an early calcite cement suggests that the Khatatba sandstones lost a significant amount of primary porosity at an early stage of its diagenetic history. In addition to calcite, several different cements including kaolinite and syntaxial quartz overgrowth occur as pore‐filling and pore‐lining cements. Kaolinite (largely vermicular) fills pore spaces and causes reduction in the permeability of the reservoir. Based on framework grain–cement relationships, precipitation of the early calcite cement was either accompanied by or followed the development of part of the pore‐lining and pore‐filling cements. Secondary porosity development occurred due to partial to complete dissolution of early calcite cements and feldspar. Late kaolinite clay cement occurs due to dissolved feldspar and has an impact on the reservoir quality of the Khatatba sandstones. Open hydraulic fractures also generated significant secondary porosity in sandstone reservoirs, where both fractures and dissolution took place in multiple phases during late diagenetic stages. The diagenesis and sedimentary facies help control the reservoir quality of the Khatatba sandstones. Fluvial channel sandstones have the highest porosities and permeabilities, in part because of calcite cementation, which inhibited authigenic clays or was later dissolved, creating intergranular secondary porosity. Fluvial crevasse‐splay and marine sandstones have the lowest reservoir quality because of an abundance of depositional kaolinite matrix and pervasive, shallow‐burial calcite and quartz overgrowth cements, respectively. Copyright © 2013 John Wiley & Sons, Ltd.     

地下巷道弹性位移反分析各种优化方法的探讨

探讨了６种最优化方法（鲍威尔法、单纯形加速法、阻尼最小二乘法、变尺度法、模式搜索法和变量轮换法）在巷道弹性位移反分析中的应用情况。从参数初始点的选择、收敛速度、收敛精度和可靠性方面评价了这６种无约束最优化方法的优劣。     

Morphometric analysis of Chattian–Early Aquitanian Miogypsinidae from Iraq and their stratigraphic distribution in the Arabian Tethys

A biometric study of Chattian–Early Aquitanian taxa from shallow marine transgressive carbonate deposits in the Oligo-Miocene sedimentary basin of Kirkuk, Iraq, provides new insight into their taxonomy, stratigraphy, and palaeobiogeography. Their evolution is based on a distinct change in general nepiont morphology, which agrees with the principle of nepionic acceleration. Each Miogypsinoides group is represented by more than one lineage. We demonstrate for the first time the parallel evolution of Miogypsina and Miogypsinoides in the late Chattian of north-eastern Iraq. We assign specimens into two lineage groups: Miogypsinoides formosensis of the Late Chattian, with smaller embryon and longer post-embryonic spirals, which evolved into Miogypsinoides bantamensis of the Early Aquitanian; and Miogypsinoides sivasensis, with shorter spirals and larger embryon, originally found in late Chattian to Early Aquitanian deposits. This group evolved into large embryon and longer post-embryonic spiral specimens of the upper Azkand Formation, assigned to Miogypsinoides dehaartii and associated with Miogypsina gunteri-basraensis and M. gunteri due to their peculiar morphological features. Miogypsina specimens are related to Miogypsina basraensis, which have much smaller embryon dimensions. This part of the sequence corresponds to Ms. formosensis and is overlain by a Miogypsina ex. interc. gunteri-basraensis succession, a composite species that evolved to Miogypsina gunteri, the most common Miogypsinids taxon in the carbonate upper Azkand Formation, thereby acting as a reference for the evolution of this taxon and its transition to M. ex. interc. tani-gunteri. Miogypsinoides evolution in the Iraqi sedimentary basin is similar to Western Tethys evolution yet differs from Indo-Pacific evolution.     

Occurrence of jarosite within Quaternary coastal sabkha sediments in Kuwait,Arabian Gulf

X-ray diffractometer analysis and SEM investigation confirmed the occurrence of jarosite and alunogen minerals in the Quaternary siliciclastic sabkha sediments of northern Kuwait within the Bahrah oilfield area, Arabian Gulf. Jarosite is relatively abundant in a near-surface whitish sticky tidal muddy sand layer about 60 cm thick that overlies the ferruginous sandstone of the Oligo-Miocene Ghar Formation. Jarosite occurs as clusters of euhedral pseudo-cubes of about 1 μm in size and as agglomerated nanoglobules of 250 nm in size. A hypogenetic origin related to the reaction of sulfuric acid produced by the oxidation of H₂S associated with hydrocarbon gas seepages with K and Fe leachates is suggested. The restricted occurrence of jarosite within near-surface sabkha sediments may be attributed to limited tidal inundation and prevalence of arid climatic conditions.     

Status of sedimentation in King Talal Dam,case study from Jordan

This paper focuses on characterizing the current status of physical and chemical characteristics of King Talal Dam (KTD) sediments. The quality of sediments was investigated based on several international sediment quality guidelines. The volume of sediment and sedimentation rate in (KTD) was also estimated. Five types of granulometric textural facies were observed for the sediments of KTD reservoir bed, with an average grain size distribution of gravel (1.38%), sand (32.38%), silt (32.35%) and clay (32.38%). The fraction of <63 micron showed that the total mean size was 8.0 micron. Other sediment parameters in KTD were 7.0% for total organic matter (TOM), 7.3 for pH, 35.9% for CaCO₃ and 100.5 meq/100 g for cation exchange capacity, with dominant mineralogical constituents of quartz, calcite, dolomite, clay minerals and minor feldspar. The total concentrations of F, Cl, NO₂, NO₃, PO₄ and SO₄ in sediment samples were lower inward for KTD. The vast majority of trace metals in sediments were generally within the standard limits recommended for soils. TOM and grain size of sediment are major factors governing the trace metal concentrations. The calculated geoaccumulation index (I _geo) and enrichment factor of metals in bottom sediments showed that the metals were in the following order: Cd > Pb > Zn > Co > Cr > Ni > Fe > Cu > Sr > Mn and Cd > Zn > Pb > Co > Cr > Ni > Cu > Sr > Mn, respectively. Based on the sonic survey of KTD reservoir, the annual sedimentation rate was about 0.4061 MCM/year, in which about 18.66% of the reservoir initial storage capacity was lost to sediments and a projected lifespan of about 198 years.     

The impact of health financing and CO<Subscript>2</Subscript> emission on health outcomes in Sub-Saharan Africa: A cross-country analysis

The current paper examines the relationship between health financing (public and out-of-pocket health financing), CO₂ emission and health outcomes in 35 Sub-Saharan African countries for the period of 1995–2012. The panel unit root and cointegration tests are conducted as pre-tests, followed by the estimation of the parameters using the FM-OLS and DOLS techniques. The findings of the study show the importance of public health financing as one of the major factors that lead to better health outcomes, whereas the out-of-pocket expenditure is found to be harmful to population health since it leads to increase under-5 mortality rate. Although the results show a negative relationship between CO₂ and health outcomes, still these results remain inclusive. In addition, the findings reveal the importance of socioeconomic factors such as income and education as key determinants of health outcomes.     

Climate-resilient agricultural water management to alleviate negative impacts of global warming in rice production systems

Theoretical and Applied Climatology - Improving the economic productivity of limited available freshwater through producing more rice with less water is essential to sustain paddy production...     

Multi-factor impact analysis of agricultural production in Bangladesh with climate change

Diverse vulnerabilities of Bangladesh's agricultural sector in 16 sub-regions are assessed using experiments designed to investigate climate impact factors in isolation and in combination. Climate information from a suite of global climate models (GCMs) is used to drive models assessing the agricultural impact of changes in temperature, precipitation, carbon dioxide concentrations, river floods, and sea level rise for the 2040–2069 period in comparison to a historical baseline. Using the multi-factor impacts analysis framework developed in Yu et al. (2010), this study provides new sub-regional vulnerability analyses and quantifies key uncertainties in climate and production. Rice (aman, boro, and aus seasons) and wheat production are simulated in each sub-region using the biophysical Crop Environment REsource Synthesis (CERES) models. These simulations are then combined with the MIKE BASIN hydrologic model for river floods in the Ganges-Brahmaputra-Meghna (GBM) Basins, and the MIKE21 Two-Dimensional Estuary Model to determine coastal inundation under conditions of higher mean sea level. The impacts of each factor depend on GCM configurations, emissions pathways, sub-regions, and particular seasons and crops. Temperature increases generally reduce production across all scenarios. Precipitation changes can have either a positive or a negative impact, with a high degree of uncertainty across GCMs. Carbon dioxide impacts on crop production are positive and depend on the emissions pathway. Increasing river flood areas reduce production in affected sub-regions. Precipitation uncertainties from different GCMs and emissions scenarios are reduced when integrated across the large GBM Basins’ hydrology. Agriculture in Southern Bangladesh is severely affected by sea level rise even when cyclonic surges are not fully considered, with impacts increasing under the higher emissions scenario.     

Comparative Analyses of the Point Cloud Produced by Using Close-Range Photogrammetry and Terrestrial Laser Scanning for Rock Surface

Point cloud produced by using theoretically and practically different techniques is one of the most preferred data types in various engineering applications and projects. The advanced methods to obtain point cloud data in terrestrial studies are close range photogrammetry (CRP) and terrestrial laser scanning (TLS). In the TLS technique, separated from the CRP in terms of system structure, denser point cloud at certain intervals can be produced. However, point clouds can be produced with the help of photographs taken at appropriate conditions depending on the hardware and software technologies. Adequate quality photographs can be obtained by consumer grade digital cameras, and photogrammetric software widely used nowadays provides the generation of point cloud support. The tendency and the desire for the TLS are higher since it constitutes a new area of research. Moreover, it is believed that TLS takes the place of CRP, reviewed as antiquated. In this study that is conducted on rock surfaces located at Istanbul Technical University Ayazaga Campus, whether point cloud produced by means photographs can be used instead of point cloud obtained by laser scanner device is investigated. Study is worked on covers approximately area of 30 m?×?10 m. In order to compare the methods, 2D and 3D analyses as well as accuracy assessment were conducted. 2D analysis is areal-based whereas 3D analysis is volume-based. Analyses results showed that point clouds in both cases are similar to each other and can be used for similar other studies. Also, because the factors affecting the accuracy of the basic data and derived product for both methods are quite variable, it was concluded that it is not appropriate to make a choice regardless of the object of interest and the working conditions.     

Prediction of Land Cover Change Using Markov and Cellular Automata Models: Case of Al-Ain,UAE, 1992-2030

The UAE has witnessed rapid urban development and economic growth in recent years. With its ambitious vision to become one of the advanced nations by 2021, planners and policy-makers need to know the most likely direction of future urban development. In this study, remotely sensed imagery coupled with cellular automata models were used to predict land cover in Al Ain, the second largest city in the Emirate of Abu Dhabi. Markov and cellular automata models were used for 1992 and 2006 to predict land cover in 2012. Land Use and Land Cover maps for the study area were derived from 1992, 2006, and 2012 Landsat satellite images (TM, ETM⁺). The models achieved an overall accuracy of approximately 80 %. A Markov model was applied for 2006 and 2012 to predict land cover in 2030. The results conformed to the general trend of the Al Ain Master Plan 2030. This study demonstrates that remote sensing, with the availability of free Landsat data, is a viable technology that could be used to help in the prediction process especially in developing countries, where data availability is a problem.