Drag force on a vegetation field due to long-crested and short-crested nonlinear random waves

This paper provides a practical method for estimating the drag force on a vegetation field exposed to long-crested (2D) and short-crested (3D) nonlinear random waves. This is achieved by using a simple drag formula together with an empirical drag coefficient given by Mendez et al. (1999), in conjunction with a stochastic approach. Here the waves are assumed to be a stationary narrow-band random process. Effects of nonlinear waves are included by adopting the Forristall (2000) wave crest height distribution representing both 2D and 3D random waves.     

Stellar mass loss and the intracluster medium in Galactic globular clusters: a deep radio survey for H i and OH

We present the results of a survey, the deepest to date, for H  i emission at 21 cm and OH emission at 18 cm (lines at 1612, 1665, 1667 and 1720 MHz) in the direction towards the Galactic globular clusters M15, M2, NGC 6934, NGC 7006 and Pal 13. The aim is to measure the amount of hydrogen in the intracluster medium, and to find OH masers in the circumstellar envelopes of globular cluster red giants. We present a tentative detection of  0.3 M_⊙  of neutral hydrogen in M15 and possible detections of neutral hydrogen in M2 and Pal 13. We derive upper limits to the neutral hydrogen content of NGC 6934 and 7006. No OH emission is detected. We also present deep H  i data of the northern tip of the Magellanic Stream behind Pal 13.     

Formation of uranium‐thorium‐rich bitumen nodules in the Lockne impact structure,Sweden: A mechanism for carbon concentration at impact sites

Abstract— The Ordovician Lockne impact structure is located in central Sweden. The target lithology consisted of limestone and black unconsolidated shale overlaying a Precambrian crystalline basement. The Precambrian basement is uranium‐rich, and the black shale is both uranium‐ and organic‐rich. This circumstance makes Lockne a good candidate for testing the occurrence of U‐Th‐rich bitumen nodules in an impact structure setting. U‐Th‐rich bitumen nodules are formed through irradiation; hence the increase in the complexity of organic matter by a radioactive (uranium‐ and thorium‐rich) mineral phase. U‐Th‐rich bitumen nodules were detected in crystalline impact breccia and resurge deposits from the impact structure, but samples of non‐impact‐affected rocks from outside the impact structure do not contain any U‐Th‐rich bitumen nodules. This implies that in the Lockne impact structure, the nodules are associated with impact‐related processes. U‐Th‐rich bitumen nodules occur throughout the geological record and are not restricted to an impact structure setting, but our studies at Lockne show that this process of irradiation can readily occur in impact structures where fracturing of rocks and a post‐impact hydrothermal system enhances fluid circulation. The irradiation of organic matter by radioactive minerals has previously been proposed as a process for concentration of carbon on the early Earth. Impact structures are suggested as sites for prebiotic chemistry and primitive evolution, and irradiation by radioactive minerals could be an important mechanism for carbon concentration at impact sites.     

Isotopic climate record in a Holocene stalagmite from Ursilor Cave (Romania)

The PU‐2 stalagmite from Ursilor Cave provides the first dated Romanian isotope record for the Holocene. The overall growth rate of the speleothem was 3.5 cm kyr^?1, corresponding to a temporal resolution of 142 y between each isotope analysis. The ‘Hendy’ tests indicate that isotopic equilibrium conditions occurred during the formation of PU‐2, and hence that it is suitable for palaeoclimatic studies. The relationship between δ¹⁸O and temperature was found to be positive. This can be interpreted either as rain‐out with distance from the west‐northwest ocean source of evaporation or shifts in air mass source with changing North Atlantic Oscillation indices. Applying five U–Th thermal ionisation mass spectrometric (TIMS) dates to a 17.5 cm isotope profile (δ¹⁸O and δ¹³C) along the stalagmite growth axis enabled a tentative interpretation of the palaeoclimate signal over the past 7.1 kyr. Spikes of depleted isotopic δ¹⁸O values are centred near ca. 7, ca. 5.2 and ca. 4 ka, reflecting cool conditions. The record shows two warm intervals between ca. 3.8 and ca. 3.2 ka (the maximum warmth) and from ca. 2 to ca. 1.4 ka, when the δ¹⁸O values were less negative than present. The ‘Holocene Climate Optimum’ spanning the time interval from ca. 6.8 to ca. 4.4 ka is not well expressed in the PU‐2 stalagmite. Individual spikes of lighter δ¹³C are interpreted as indicative of periods of heavy rainfall, at ca. 7, ca. 5.5, and ca. 3.5 ka. The overall trend to lighter δ¹³C in the PU‐2 stalagmite may reflect a gradual decrease in water–rock interaction. The results demonstrate that the effect of North Atlantic oceanic changes extended to the investigated area. Nevertheless, some differences in temporal correlation and intensity of stable isotopic response to these climatic events have been found, but the exact nature of these differences and the underlying mechanism is yet to be determined. Copyright © 2002 John Wiley & Sons, Ltd.     

Water budget and surface‐layer water storage in a Sphagnum bog in central Sweden

A water budget was established for the open, undisturbed bog Stormossen, central Sweden, for the growing seasons of 1996 and 1997 as a part of the NOPEX project. The water budget was complemented with data on the spatial variation of groundwater levels and water contents in different microrelief elements (ridge, hollow and ridge margin). The seasonal (24 May to 4 October) rainfall, evaporation and runoff were 200, 256, and 43 mm in 1996, respectively, and 310, 286 and 74 mm in 1997, giving negative budgets of ?99 mm in 1996 and ?50 mm in 1997. Approximately 60% of the total budget was caused by storage changes in the upper 40 cm of the bog and 40% by swelling/shrinking in the layers below. This ‘mire breathing’ must be incorporated in future models of mire‐water dynamics. The water content varied diversely among the different microrelief elements, much depending on the properties of moss and peat together with distance to water table. There also was a strong hysteresis in the relationships between groundwater level and measured volumetric water content, depending partly on pore‐throat effects and partly on swelling/shrinking of the peat matrix. A seasonal variation of volumetric water content in a layer beneath water table was found to be larger than what could be justified by compression alone. We think that probable causes could be methane gas expansion together with temperature effects. The main conclusions of this study were: (i) water‐transport and storage characteristics are distinctly different among hummocks, ridges and hollows, (ii) mire wetness cannot be deduced from groundwater levels only, and (iii) an important part of the total water storage was caused by swelling/shrinking of the peat, not by changes in unsaturated water content. Copyright © 2002 John Wiley & Sons, Ltd.     

GAIA Photometry: Selected Topics

Three topics within GAIA photometry have been selected for discussion here: (1) tasks to be accomplished in preparation of the mission; (2) unexpected effects in medium-band photometric systems; and (3) the broad-band photometric system: chromaticity and astrophysics. This revised version was published online in July 2006 with corrections to the Cover Date.     

Modelling of Thermal Stratification and Ice Dynamics with Application to Lake Teletskoye,Altai Republic,Russia

Water Resources - Numerical modelling of ice growth and transport of matter in lakes, estuaries, or coastal seas can provide crucial input for improving the environment. In this paper, the goal is...     

Nanoscale porosity in SAFOD core samples (San Andreas Fault)

With transmission electron microscopy (TEM) we observed nanometer-sized pores in four ultracataclastic and fractured core samples recovered from different depths of the main bore hole of the San Andreas Fault Observatory at Depth (SAFOD). Cutting of foils with a focused ion beam technique (FIB) allowed identifying porosity down to the nm scale. Between 40 and 50% of all pores could be identified as in-situ pores without any damage related to sample preparation. The total porosity estimated from TEM micrographs (1–5%) is comparable to the connected fault rock porosity (2.8–6.7%) estimated by pressure-induced injection of mercury. Permeability estimates for cataclastic fault rocks are 10^? 21–10^? 19 m² and 10^? 17 m² for the fractured fault rock. Porosity and permeability are independent of sample depth. TEM images reveal that the porosity is intimately linked to fault rock composition and associated with deformation. The TEM-estimated porosity of the samples increases with increasing clay content. The highest porosity was estimated in the vicinity of an active fault trace. The largest pores with an equivalent radius > 200 nm occur around large quartz and feldspar grains or grain-fragments while the smallest pores (equivalent radius < 50 nm) are typically observed in the extremely fine-grained matrix (grain size < 1 μm). Based on pore morphology we distinguish different pore types varying with fault rock fabric and alteration. The pores were probably filled with formation water and/or hydrothermal fluids at elevated pore fluid pressure, preventing pore collapse. The pore geometry derived from TEM observations and BET (Brunauer, Emmett and Teller) gas adsorption/desorption hysteresis curves indicates pore blocking effects in the fine-grained matrix. Observations of isolated pores in TEM micrographs and high pore body to pore throat ratios inferred from mercury injection suggest elevated pore fluid pressure in the low permeability cataclasites, reducing shear strength of the fault.     

Focused groundwater discharge of phosphorus to a eutrophic seepage lake (Lake Væng, Denmark): implications for lake ecological state and restoration

A study on Lake Væng in Denmark demonstrates a high potential for loading of phosphorous via groundwater to seepage lakes. Groundwater discharges are displayed as an important source of phosphorous to a lake due to: (1) high concentrations in the aquifer just below the lake, and (2) the main flow paths through the aquifer–lakebed interface either being overland flow through a seepage face, or focused in zones with very high discharge rates. In-lake springs have measured discharge of up to 7.45 m³ per m² of lakebed per day. These findings were based on seepage meter measurements at 18 locations, stable isotope (δ¹⁸O) analyses, temperature profiles and mapping of ice cover distribution. Groundwater–lake interaction was modelled with a 2D conceptual flow model (MODFLOW) with hydrogeology interpreted from catchment multi electrode profiling, on-lake ground-penetrating radar, well logging and borehole data. Discharge was found to be much focused and opposite to expected increase away from the shoreline. The average total phosphorus concentration in discharging groundwater sampled just beneath the lakebed was 0.162 mg TP/l and thereby well over freshwater ecological thresholds (0.043–0.612, median = 0.117 mg TP/l). The study illustrates a direct link between groundwater and lake chemistry.     

A poly morphological landform approach for hydrogeological applications in heterogeneous glacial sediments

The ‘poly morphological (PM) concept’ is used to assess geological heterogeneity in glacial sediments and to evaluate groundwater recharge to aquifers, especially those underlying clay till. The novelty of the PM concept is that it enhances the knowledge of, especially, heterogeneity of till units in geological models by using superimposed geomorphological units with typical sediment types related to the individual landforms. The PM concept is demonstrated through the construction of a poly morphological map for Zealand in Denmark and an aggregated map comparing clay-till-thickness distribution within individual PM types. The hydrogeological applicability of the PM concept was tested with a physical-based distributed 3D hydrological model. The aggregated PM map was compared with fracture and redox conditions at 21 field sites to evaluate the PM-type correlation to: (1) till thickness, (2) thickness of the reduced-till zone, and (3) depth to the zone with fracture spacing >1 m The results show that the till thickness is a critical parameter for the formation of fracture networks in clay till, and that fracture density decreases in till thicker than 8–10 m. However, the amount of data is still inadequate for statistically proving the PM concept.