Estimation of the effect of protective piers on wind wave parameters in the Sevastopol Bay

An effectiveness of the storm wave attenuation by protective piers in the Sevastopol Bay of the Black Sea is studied on the basis of numerical simulation using the SWAN spectral model. Analyzed are the parameters of waves generated by winds of four main directions as well as by the southern cyclone during the storm on November 11, 2007. It is obtained that waves from the northwest part of the Black Sea penetrate most intensively into the Sevastopol Bay in case of western wind and, to a lesser degree, in case of northern and southern winds. A protective effect of the piers is observed in the west part of the bay only and the wave attenuation near the southern coast is more significant than near the northern one. The area of the southern coast directly behind the southern pier is completely protected from the storm waves and, as moving away from the pier, the danger of intensive wave effect on the coast is kept.     

A new algorithm to estimate sky condition based on 5 minutes-averaged values of clearness index and relative optical air mass

Summary This work describes a new algorithm to characterize sky condition in intervals of 5 min using four categories of sun exposition: apparent sun with cloud reflection effects; apparent sun without cloud effects; sun partially concealed by clouds; and sun totally concealed by clouds. The algorithm can also be applied to estimate hourly and daily sky condition in terms of the traditional three categories: clear, partially cloudy and cloudy day. It identifies sky conditions within a confidence interval of 95% by minimizing local climate and measurement effects. This is accomplished by using a logistic cumulative probability function to characterize clear sky and Weibull cumulative probability function to represent cloudy sky. Both probability functions are derived from frequency distributions of clearness index, based on 5 minutes-averaged values of global solar irradiance observed at the surface during a period of 6 years in Botucatu, Southeastern of Brazil. The relative sunshine estimated from the new algorithm is statistically comparable to the one derived from Campbell-Stocks sunshine recorder for both daily and monthly values. The new method indicates that the highest frequency of clear sky days occurs in Botucatu during winter (66%) and the lowest during the summer (38%). Partially cloudy condition is the dominant feature during all months of the year.     

The biogeochemical sulfur cycle in the marine boundary layer over the Northeast Pacific Ocean

The major components of the marine boundary layer biogeochemical sulfur cycle were measured simultaneously onshore and off the coast of Washington State, U.S.A. during May 1987. Seawater dimethylsulfide (DMS) concentrations on the continental shelf were strongly influenced by coastal upwelling. Concentration further offshore were typical of summer values (2.2 nmol/L) at this latitude. Although seawater DMS concentrations were high on the biologically productive continental shelf (2–12 nmol/L), this region had no measurable effect on atmospheric DMS concentrations. Atmospheric DMS concentrations (0.1–12 nmol/m³), however, were extremely dependent upon wind speed and boundary layer height. Although there appeared to be an appreciable input of non-sea-salt sulfate to the marine boundary layer from the free troposphere, the local flux of DMS from the ocean to the atmosphere was sufficient to balance the remainder of the sulfur budget.     

Paleoclimatic evolution of central Sudan during the Late Miocene to Pleistocene

In this paper, information derived from X-ray diffraction and heavy and light fractions analyses were discussed with the aim to trace the paleoclimatic changes of central Sudan during the Late Miocene to Pleistocene. Based on lithological and mineralogical characters noted in the Sayal and Umm Ruwaba Formations, four phases of distinct paleoclimatic changes were recognized. The first phase commenced in the Late Miocene during the deposition of the Sayal formation. The area was slightly uplifted and of gentle slope, a feature deduced from the deposition of clayey and fine-grained sandy materials with subordinate gravely component. A hot and humid climate, depicted from the development of kaolinite and iron oxide, is proposed during the deposition of the Sayal formation. The second phase is characterized by development of depressions in which alluvial streams and possibly small lacustrine basins occurred. This is inferred from the presence of sandy and silty materials, a characteristic of the lower and middle parts of the Umm Ruwaba Formation. The climate remained hot and humid during the deposition of the lower part of the Umm Ruwaba Formation in the early Pliocene. A shift to dry conditions with possible periodic humid seasons is, however, thought to be established during the deposition of the middle part of the Umm Ruwaba Formation deduced from the observed increase in salinity and decrease in iron oxide content. During the third phase, throughout the deposition of the upper part of the Umm Ruwaba Formation, the kinetic energy of streams increased as can be inferred from the presence of gravely intercalations. Deposition under arid climate is suggested for the lowermost part due to the increased amount of feldspars and the absence of iron oxide. However, evidence of cool condition is again noted at the topmost part of the formation inferred from the relatively high content of iron oxide in the deposits.     

Sources of the Late Mesozoic magmatic associations in the northeastern part of the Amurian microcontinent

Based on generalization of available geochronological data, Late Mesozoic magmatic associations in the northeastern part of the Amurian microcontinent are divided into three groups: 142–125, 124–115, and <110 Ma. The age of these associations decreases with approaching the Pacific margin of Asia. In the same direction, they show a change in sources of their parental melts: continental crust (142–125 Ma) → continental crust + PREMA (DM) (124–115 Ma) → continental crust + PREMA (DM) + EMII (<110 Ma). Isotope-geochemical (Sr-Nd) study indicates that intrusive and volcanic rocks of the Late Mesozoic magmatic associations in the northeastern part of the Amurian microcontinent were originated in geodynamic settings that provided access of enriched mantle sources to magma formation. The most probable of these settings are as follows: (1) plate sliding accompanying by the formation of slab window beneath continental margin; (2) passage of the Asian margin over the East Asian mantle hot field in the Late Mesozoic; (3) asthenospheric upwelling due to delamination of the lower crust during closure of the Mongolian-Okhotsk ocean caused by collision between the Amurian microcontinent, Dzhugdzhur-Stanovoy, and Selenga-Stanovoy superterranes in the Central Asian fold belt.     

Specific features of the characteristics of midlatitude substorm and nonsubstorm Pi2 geomagnetic pulsations and their generation conditions

The specific features of the diurnal and seasonal variations in different characteristics of two Pi2 geomagnetic pulsation groups (observed during magnetospheric substorms and when these substorms are absent) and the pulsation generation geophysical conditions have been experimentally studied based on observations at the Borok midlatitude observatory. It has been indicated that the dynamics of the occurrence frequency of Pi2 substorm and nonsubstorm bursts and their amplitude, duration, and intervals between peaks depending on the local time and season is identical in many respects. It has been found that substorm Pi2 bursts are mostly observed when the IMF is sunward and the solar wind electric field (Ey) is positive, whereas nonsubstorm bursts are observed when the IMF is antisunward and Ey is negative. The fundamental differences in the diurnal and seasonal variations in index α, which characterizes the slope of the distribution function of the two-group Pi2 burst amplitudes, have been revealed. It has been found that the index α value substantially depends on Ey and the IMF longitude (ψ). It has been assumed that the plasma sheet turbulence of the metastable magnetotail is responsible for reconnection and the generation of substorm and nonsub-storm Pi2 pulsation bursts.     

Tracking CO2 plume migration during geologic sequestration using a probabilistic history matching approach

Tracking the migration of the CO₂ plume is essential in order to better manage the operation of geologic sequestration of CO₂. However, the large cost of most monitoring technologies, such as time-lapse seismic, limits their application. We investigated the application of a probabilistic history matching methodology using routine measurements of injection data, which are affected by the presence of large-scale heterogeneities, as an inexpensive alternative to track the migration of CO₂ plume in an aquifer. The approach is demonstrated first through a synthetic example in which the ability to detect the presence of flow barriers was tested. In a second example, we applied our method to the In Salah field, one of the largest geological sequestration projects in the world, where the main direction of high permeability features was inferred. The accuracy and reproducibility of the results show that our approach for assisted history matching is an economic and viable option for plume monitoring during geologic CO₂ sequestration.     

GIS in the K-12 Curriculum: A Cautionary Note

Two qualitative case studies, one focusing on K-12 teachers and the other on middle school students, explore key factors associated with using Geographic Information Systems in the classroom. In both studies, access to appropriate hardware is a critical barrier. Time is another critical barrier—time to learn the GIS software and time in the curriculum to incorporate GIS as a learning experience. In both case studies, learning the technology at the expense of learning spatial analysis was a danger, suggesting the need for conscious focus on the goal of using GIS to learn how to “do geography.”     

Dynamics of arrays of floating point-absorber wave energy converters with inter-body and bottom slack-mooring connections

If point absorbers are employed in the extensive exploitation of the offshore wave energy resource, they should be deployed in arrays, the distance between the elements in the array being possibly tens of meters. In such cases, it may be more convenient that the array is spread moored to the sea bottom through only some of its elements, located in the periphery, while the other array elements are prevented from drifting and colliding with each other by connections to adjacent elements. An array of identical floating point absorbers located at the grid points of an equilateral triangular grid is considered in the paper. A spread set of slack-mooring lines connect the peripheric floaters to the bottom. A weight is located at the centre of each triangle whose function is to pull the three floaters towards each other and keep the inter-body mooring lines under tension. The power take-off system (PTO) is a linear damper activated by the buoy heaving motion. The whole system–buoys, moorings and power take-off systems–is assumed linear, so that a frequency domain analysis may be employed. Hydrodynamic interference between the oscillating buoys in array is accounted for. Equations are presented for a set of three identical point absorbers. This is then extended to more complex equilateral triangular grid arrays. Results from numerical simulations, with regular and irregular waves, are presented for the motions and power absorption of hemispherical converters in arrays of three and seven elements and for different mooring parameters and wave incidence angles. Comparisons are given with the unmoored and independently-moored buoy situations.     

Consistency grammar for 3D indoor model checking

Indoor 3D models are digital representations of building interiors reconstructed from scanned data acquired by laser scanners, digital depth (RGBD) cameras, and CAD drawings. Consequently, there is noise in the source data and a notable variety in the methods used to treat the noise and to process these data into reconstructed models. Alas, the correctness of these reconstructions and thus their suitability for a given application are uncertain. There is a lack of a robust base logic that would allow for controlling the consistency of these (automatically) generated models. Fortunately, correctness criteria are well‐defined through existing international standards. Hence, we propose a conceptual framework based on formal grammars to check the semantic, geometric, and topological consistency of a reconstructed 3D model. The proposed method proceeds in three steps to validate the model: (1) correctness checking of individual components; (2) consistency verification of instances’ interactions; and (3) model consistency check for targeted applications. Our method identifies the components in the model that violate the given rules derived from the current standards and expert knowledge. Ultimately, we propose a quantified formulation of our method that may be straightforwardly integrated into industrial‐level model checkers. The approach is independent of level of details and reconstruction method.