Metals and metalloids in primary gold mining districts of Western Bolivia: anthropogenic and natural sources

Topsoil and subsoil samples located adjacent and distant from the mining operations sites were collected. Most total metals showed no significant differences between topsoil and subsoil or proximity, suggesting that they derive from endogenous parent material. There was an increment in Hg in topsoils adjacent to the mining operation sites, indicating a deposition of Hg from the amalgamation areas. Higher values of total, extractable and soluble As were observed adjacent to the mining operation sites, probably related to the presence of residues, rich in arsenopyrite. Organic matter and clay contents control the concentrations of EDTA-extractable Cd and Zn, while soil acidity was associated with the behaviour of As, Hg and Cu. In contrast the concentration of EDTA-extractable Pb was directly affected by its total concentration. In general, soluble metals were highly independent, without significant correlations with any soil physical and chemical properties.     

Metal accumulation by plant species growing on a mine contaminated site in Mexico

The present work aims to assess the efficiency of heavy metal accumulation of native species growing in contaminated soils in the mining district of Taxco, Mexico. Soil and tailing sampling was conducted in three study sites: La Concha, El Fraile, and a control site. The study localities present diverse metal concentrations with significant differences in their proportion in the geochemical fractions. Results show that species Cupressus lindleyi and Juniperus deppeana accumulate Zn and Mn in anomalous concentrations at La Concha, where Zn is present in soluble fractions. Manganese, despite not being present mostly in the soluble fraction in soils and tailings, seems to have been increased in the soluble fraction after the plant growth. In contrast, samples of the same species taken at El Fraile and in the control site, where Zn and Mn are mainly contained in the residual fraction, do not show an anomalous enrichment. Other analyzed species growing under the same contamination conditions in La Concha (Jacaranda mimosifolia and Psidium guajava) do not show anomalous concentrations. These facts confirm the Zn and Mn accumulation capacity of C. lindleyi and Ju. deppeana, which depends on their accumulation ability and on the concentration of these elements in the soluble fraction.     

Effects of coastal orientation and depth on the distribution of subtidal benthic assemblages

A better understanding of biological systems can only be gained if we understand what processes are important and how they operate to determine the distribution of organisms. Coastal orientation and depth can influence environmental conditions, including the degree of water motion and availability of light, which in turn may influence the horizontal and vertical patterns of organism distribution. Here, we used a mixed‐model design to examine the effects of coastal orientation and depth on the structure of benthic assemblages by comparing the abundance and distribution of macroalgae and invertebrates in shallow and deep waters on the opposing coasts of São Miguel. Generally, coastal orientation had little influence on the distribution of most taxa. In contrast, significant differences were generally associated with depth, although patterns were spatially variable at the scale of locations. This study suggests that depth, and processes operating at the scale of location, but not at the scale of the coast, have an important influence on these assemblages, and that failure to recognise such a scale of variability may hamper our ability to better understand the processes that structure these communities.     

Continuity and facies heterogeneities of shallow carbonate ramp cycles (Sinemurian,Lower Jurassic,North‐east Spain)

The lateral continuity and facies heterogeneities of metre‐scale cycles in a greenhouse Lower Jurassic (Sinemurian) carbonate ramp from the northern Iberian Basin (Spain) was evaluated from extensive field analysis carried out on a well‐exposed 12 km long outcrop. Eleven high‐frequency continuous cycles and their bounding surfaces are traceable laterally through the entire outcrop. However, three of these cycles are found to split laterally into discontinuous cycles of more limited distribution (up to 3 to 5 km of lateral extent). The continuous and discontinuous cycles have a similar field expression in one‐dimensional logs. As a consequence, the number of cycles that can be differentiated is variable along the logged sections (i.e. from 11 to 16). Cycles have variable facies heterogeneities and sedimentary trends depending on the environment of formation: shallowing‐upward and symmetrical cycles occur in protected lagoon–tidal flat areas and in the open‐marine, high‐energy domain. These cycles show significant facies heterogeneities, which were controlled mainly by lateral migration of a mosaic of facies over an irregular topography. Deepening‐upward and aggradational cycles are generated in low‐energy, sub wave‐base, open‐marine areas. Facies are laterally homogeneous, reflecting low potential for carbonate accumulation and inability to fill the created accommodation space in this low‐relief and relatively deep area. Cycle boundaries are generated by stages of rapid accommodation gain, involving the flooding of the carbonate ramp; they are more likely to originate from regional tectonic pulses (related to the extensional tectonics operating in the northern Iberian Basin) rather than greenhouse low‐amplitude eustacy. Discontinuous cycles tend to occur in thickened areas and are interpreted as originating from the infill of wedge‐shaped accommodation space resulting from differential subsidence (i.e. local tectonic pulses). In conclusion, where thickness variations occur in extensional settings lateral continuity of cycles should not be expected. In less well‐exposed, or in one‐dimensional sections and in wells, it would not be possible to distinguish continuous from discontinuous cycles, or to understand such two‐dimensional heterogeneities. Identification of unique cycle‐forming mechanisms or attempting cyclostratigraphic long‐distance correlation of cycles is unrealistic without a detailed analysis of the architecture of cycles in laterally continuous outcrops.     

20th-CENTURY CHANGES OF TEMPERATURE IN THE MOUNTAIN REGIONS OF CENTRAL EUROPE

Daily maximum and minimum temperatures from 29 low-lying and mountain stations of 7 countries in Central Europe were analyzed. The analysis of the annual variation of diurnal temperature range helps to distinguish unique climatic characteristics of high and low altitude stations. A comparison of the time series of extreme daily temperatures as well as mean temperature shows a good agreement between the low-lying stations and the mountain stations. Many of the pronounced warm and cold periods are present in all time series and are therefore representative for the whole region. A linear trend analysis of the station data for the period 1901–1990 (19 stations) and 1951–1990 (all 29 stations) shows spatial patterns of similar changes in maximum and minimum daily temperatures and diurnal temperature range. Mountain stations show only small changes of the diurnal temperature range over the 1901–1990 period, whereas the low-lying stations in the western part of the Alps show a significant decrease of diurnal temperature range, caused by strong increase of the minimum temperature. For the shorter period 1951–1990, the diurnal temperature range decreases at the western low-lying stations, mainly in spring, whereas it remains roughly constant at the mountain stations. The decrease of diurnal temperature range is stronger in the western part than in the eastern part of the Alps.     

Analyzing the genesis, intensity, and tracks of western Mediterranean cyclones

Midlatitude cyclones are analyzed on a selected region covering most of southern Europe and the western part of the Mediterranean Sea (35–50°N, 10°W–25°E). On the basis of mean sea level pressure fields of the ECMWF (European Centre for Medium-range Weather Forecast) Reanalysis Dataset (ERA-40), detailed evaluation of Mediterranean cyclones is accomplished for the period between 1957 and 2002 on a 1° horizontal resolution grid. Cyclone centers are identified and their paths are tracked with a 6-h time step (using 00 UTC, 06 UTC, 12 UTC, and 18 UTC). Decadal, annual, and seasonal statistical analysis of cyclone tracks includes the study of the genesis, frequency, and activity of the Mediterranean cyclones as well as the variability of cyclone tracks. The results suggest that the cyclone frequency in the western Mediterranean region increased in summer and autumn, and decreased in winter and spring. A special belt-shaped area is identified, which plays a special role in cyclogenesis, and also, the cyclone tracks often remain within this belt. An overall decreasing trend is detected in winter and spring in the entire Mediterranean belt, while cyclone frequency increased in autumn. The largest positive and negative trend coefficients are identified in summer.     

Using historical data, expert judgement and multivariate analysis in assessing reference conditions and benthic ecological status, according to the European Water Framework Directive

The European Water Framework Directive (WFD) establishes a framework for the protection and improvement of estuarine and coastal waters, trying to achieve 'good surface water status at the latest 15 years after the date of entry into force of this Directive'. One of the biological elements that should be analysed is the benthos and, as such, the WFD normative definitions describe the aspects of the benthic communities that must be included in the ecological status assessment of a water body. Therefore, it is essential to include, in the assessment, the different metrics that address those parameters identified in the normative definitions for each of the ecological status classes. In this contribution the use of the AMBI, richness and diversity, combined with the use, in a further development, of factor analysis together with discriminant analysis, is presented as an objective tool (named here M-AMBI) in assessing ecological quality status. This assessment requires previous classification of water bodies and typologies, together with the definition of reference conditions; this is undertaken in this contribution using historical data, expert judgement and multivariate analysis. The study has been undertaken by examining changes in benthic communities in the Basque Country, over the last decade, as a case-study, to demonstrate the accuracy and potential of these methodologies.     

Black crusts on travertine: factors controlling development and stability

The travertine buildings of Budapest show extensive black crust formation, which is related to high concentration of atmospheric pollution and a continental climate. Laminar black crusts, framboidal black crusts and leached white surfaces are compared. Physical properties (Schmidt hammer rebound, Duroscope rebound), mineralogical composition and elemental composition are measured. Framboidal black crusts contain more than 50% of acicular gypsum. The crust surface displays idiomorphic rosette-like gypsum crystals with particulates, calcite and gypsum crystal aggregates. The sulphur isotopic composition of the black crusts pinpoints the involvement of rain and dust in crust formation. Thick framboidal black crust has the lowest strength while thin laminar black crust and white dissolved surfaces show minor decrease in surface strength compared to unaltered travertine. The crusts adhere to the travertine surface and rarely show mechanical decay forms that are typical features of porous limestone ashlars in Budapest.     

Evolution of anisotropy with saturation and its implications for the elastoplastic responses of clay rocks

Many clay rocks have distinct bedding planes. Experimental studies have shown that their mechanical properties evolve with the degree of saturation (DOS), often with higher stiffness and strength after drying. For transversely isotropic rocks, the effects of saturation can differ between the bed-normal (BN) and bed-parallel (BP) directions, which gives rise to saturation-dependent stiffness and strength anisotropy. Accurate prediction of the mechanical behavior of clay rocks under partially saturated conditions requires numerical models that can capture the evolving elastic and plastic anisotropy with DOS. In this study, we present an anisotropy framework for coupled solid deformation-fluid flow in unsaturated elastoplastic media. We incorporate saturation-dependent strength anisotropy into an anisotropic modified Cam-Clay (MCC) model and consider the evolving anisotropy in both the elastic and plastic responses. The model was calibrated using experimental data from triaxial tests to demonstrate its capability in capturing strength anisotropy at various levels of saturation. Through numerical simulations, we demonstrate the role of evolving stiffness and strength anisotropy in the mechanical behavior of clay rocks. Plane strain simulations of triaxial compression tests were also conducted to demonstrate the impacts of material anisotropy and DOS on the mechanical and fluid flow responses.