Web-GIS tool for the management of rural land markets

Land abandonment and stagnation of rural markets in the last few years have become one of the main concerns of rural administrations. The use of Web and GIS (Geographic Information System) technologies can help to mitigate the effects of these problems. This paper pro-poses a novel Web-GIS tool with spatial capabilities for the dynamization of rural land markets by encouraging the transfer of land from owners to farmers through the leasing of plots. The system, based on open source software, offers information about the properties, their environment and their owners. It uses standards for handling the geographic information and for communicating with external data sources. This system was used as the basis for the development of SITEGAL, the tool for the management of the Land Bank of Galicia (ss="a-plus-plus">www.bantegal.com/sitegal). SITEGAL has been operational since 2007 obtaining benefits for both administration and users (farmers and land owners), and promoting the e-Government.     

Regional stratigraphy and distribution of epigenetic stratabound celestine, fluorite, barite and Pb–Zn deposits in the MVT province of northeastern Mexico

Northeastern Mexico hosts numerous epigenetic stratabound carbonate-hosted low-temperature hydrothermal deposits of celestine, fluorite, barite and zinc-lead, which formed by replacement of Mesozoic evaporites or carbonate rocks. Such deposits can be permissively catalogued as Mississippi Valley-type (MVT) deposits. The deposits studied in the state of Coahuila are associated with granitic and metasedimentary basement highs (horsts) marginal or central to the Mesozoic Sabinas Basin. These horsts controlled the stratigraphy of the Mesozoic basins and subsequently influenced the Laramide structural pattern. The Sabinas Basin consists of ~6,000-m-thick Jurassic to Cretaceous siliciclastic, carbonate and evaporitic series. The MVT deposits are mostly in Barremian and in Aptian-Albian to Cenomanian formations and likely formed from basinal brines that were mobilized during the Laramide orogeny, although earlier diagenetic replacement of evaporite layers (barite and celestine deposits) and lining of paleokarstic cavities in reef carbonates (Zn–Pb deposits) is observed. Fluid inclusion microthermometry and isotopic studies suggest ore formation due to mixing of basinal brines and meteoric water. Homogenization temperatures of fluid inclusions range from 45°C to 210°C; salinities range from 0 to 26 wt.% NaCl equiv., and some inclusions contain hydrocarbons or bitumen. Sulfur isotope data suggest that most of the sulfur in barite and celestine is derived from Barremian to Cenomanian evaporites. Regional geology and a compilation of metallogenic features define the new MVT province of northeastern Mexico, which comprises most of the state of Coahuila and portions of the neighboring states of Nuevo León, Durango and, perhaps extends into Zacatecas and southern Texas. This province exhibits a regional metal zonation, with celestine deposits to the south, fluorite deposits to the north and barite and Zn–Pb deposits mostly in the central part.     

Oxygen isotopic signature of the skeletal microstructures in cultured corals: Identification of vital effects

In order to identify vital effect on oxygen isotopic ratio, we analyzed at micrometer size scale skeleton microstructures of a scleractinian coral Acropora, cultured under constant conditions. Measurements focused on the two crystalline units highlighted different isotopic signatures. Massive crystals (centers of calcification: COC) exhibit quasi-constant lowest values whereas fibers, the dominant units exhibit scattered distribution with amplitude of up to 5‰. Fiber oxygen isotopic ratios (δ<sup>18sup>O) range from values similar to instantaneous deposition to equilibrium value. By comparing data obtained on the Acropora specimen and deep-sea corals grown under well constrained conditions, we infer that the scattered δ<sup>18sup>O aragonite fibers indicate precipitation through kinetic precipitation. Thus, we argue for inherent biological feature typical to all coral genera. Modalities of COC formation remain ignored.The different isotopic signature of two mineral microstructures present in close proximity in coral skeleton can only be explained by compartment depositions related to different organic environments. Indeed, multiple secondary electron microscopy (SEM) observations favor interaction between mineral and organic matrix surface. Moreover, atomic forcing microscopy (AFM) investigations demonstrated thermodynamic changes induced by mineralization in presence of organic compounds. The combination of our results with previous published ones from biological studies, allows us proposing a consistent model of fiber skeleton formation. The prerequisite step of mineral growth unit precipitation would be initiated by organic matrix secretion, which defines spatial extension. Specific carriers supply ionic compounds of the crystals to ensure local supersaturation. However, possibly controlled by organic molecules, ionic amount would be limited, implying the supersaturation decline over the time. This could explain the progressive decrease of the coral growth rate. In this case, vital effect should not only bias isotopic fractionation through biological activity but the mechanism of skeleton deposition is imposed by specific chemical and/or physical conditions due to the presence of organic molecules. These conclusions derive from observations performed at high resolution.Therefore, isotopic ratio measured on millimeter scale for paleoclimatic purposes, result of the average of strongly heterogeneous values. It could explain vital effects shown by geochemical time series derived from tropical coral skeleton, including the high species and/or colony variability.     

Geomorphic expression of neotectonic activity in a low relief area in an Airborne Laser Scanning DTM: A case study of the Little Hungarian Plain (Pannonian Basin)

The NW corner of the Little Hungarian Plain, which lies at the junction of the Eastern Alps, the Pannonian Basin and the Western Carpathians, is a neotectonically active region linking the extrusional tectonics of the Eastern Alps with the partly subsiding Little Hungarian Plain. The on-going deformation is verified by the earthquake activity in the region. An extremely flat part of the area, east of Neusiedlersee, the so-called Seewinkel, has been investigated with Airborne Laser Scanning (ALS, also known as airborne LiDAR) techniques, resulting in a digital terrain model (DTM) with a 1 m grid resolution and vertical precision of better than 10 cm. The DTM has been compared with known and inferred neotectonic features.Potential neotectonic structures of the DTM have been evaluated, together with geological maps, regional tectono-geomorphic studies, geophysical data, earthquake foci, as well as geomorphological features and the Quaternary sediment thickness values of the Seewinkel and the adjacent Parndorfer plateau. A combined evaluation of these data allows several tectonic features with a relief of <&nbsp;2 m to be recognized in the DTM. The length of these linear geomorphological structures ranges from several hundred meters up to several kilometers. The most prominent feature forms a 15 km long, linear, 2 m high NE–SW trending ridge with gravel occurrences having an average grain size of ca. 5 cm on its top. We conclude this feature to represent the surface expression of the previously recognized Mönchhof Fault. In general, this multi-disciplinary case study shows that ALS DTMs are extremely important for tectono-geomorphic investigations, as they can detect and accurately locate neotectonic structures, especially in low-relief areas.     

Layer parallel shortening in salt-detached folds: constraint on cross-section restoration

Cleavage-fissility perpendicular to bedding is a common feature in the external part of fold-and-thrust belts. Three techniques were used to determine the internal distortion in the frontal Southern Pyrenees: the analysis of strain markers such as burrows and rain drops, the measurement of fissility, and the measurement of anisotropy of magnetic susceptibility (AMS). The comparison of the three techniques showed a good fit although they differ in sensitivity to penetrative strain variations in the range of deformation values explored in the study case. On the regional scale, the values of layer parallel shortening (LPS) derived from the markers analysis are very constant and account for 16–23% of shortening. These values are two to three times larger than the shortening values calculated from the restoration of the macroscopic scale structures and indicate a good decoupling above the Cardona salt Formation. This study permitted an accurate restoration of the low-amplitude el Guix detached anticline.     

Perched lobe formation in the Gulf of Cadiz: Interactions between gravity processes and contour currents (Algarve Margin, Southern Portugal)

The Gulf of Cadiz is swept by the strong saline Mediterranean Outflow Water (MOW). On the Algarve Margin (South Portugal), this current has constructed fine-grained contourite drifts. This margin is dissected by the Portimao Canyon and three short channels that only incise the upper slope, and are absent on a terrace located at mid-slope depths along the Algarve Margin. High-resolution seismic profiles and sediment cores highlight the original architecture of the sedimentary deposits on this terrace. Coarse-grained lenticular chaotic bodies formed during major relative sea-level lowstands are intercalated within the drift. The lobate shape and sandy nature of the lenticular chaotic bodies and their location at the mouths of the three short channels suggest they are gravity-generated deposits that are perched on the middle continental slope.In the Gulf of Cadiz, the interaction between contour current and gravity processes is strongly controlled by climatic variations and relative sea-level changes during the late Quaternary. During cold periods when sea-level was low, erosion intensified on the continental shelf and the deepest part of MOW was active. Sediment was transported downslope through the channels and deposited on sedimentary lobes perched on the mid-slope terrace. During warm periods when relative sea-level was high, the supply of sediment from the shelf was shut off and the shallowest part of MOW was more active. Contourite drifts fill the channels and bury the sandy lobes.     

Low-frequency 3-D seismic survey of upper crustal magmatic intrusions in the northeastern Pannonian basin of Hungary

A specially designed 700-km<sup>2sup> grid survey, deploying 1000 regularly distributed low-frequency seismic recording systems, successfully investigated one of the most complex geologic environments of the Pannonian basin. The wide-angle signals penetrated through over 1000 m of multi-phase igneous lithology and recognized, for the first time, the underlying enigmatic Permian to Early Triassic basement rocks. Tomographic inversion of the first arrival grid data resulted in determination of an accurate three-dimensional (3-D) velocity field, to a depth of 4 km. The anomalous changes of the spatial velocity data outline the regional extent of the Late Miocene magmatic intrusions, which are covered by over 2000 m of Mid-Miocene to Pleistocene clastics. Complex relationship was found between the surface potential data and the intrusive bodies. This multi-faceted geophysical data analysis established a functional technique for mapping a subsurface with intricate acoustic and structural complexity.     

Life in the sublittoral zone of long-lived Lake Pannon: paleontological analysis of the Upper Miocene Szák Formation,Hungary

Life and depositional environments in the sublittoral zone of Lake Pannon, a large, brackish Paratethyan lake from the Late Miocene, were reconstructed from fossils and facies of the Szák Formation. This formation is exposed in several, roughly coeval (9.4–8.9&nbsp;Ma) outcrops, located along strike of the paleo-shelf-break in northwestern Hungary. The silty argillaceous marl of the formation was deposited below storm wave base, at 20–30 to 80–90&nbsp;m water depth. The abundance of benthic organisms indicates that the bottom water was usually well oxygenated. Interstitial dysoxia, however, may have occurred immediately below the sediment–water interface, as evidenced by occasional preservation of trace fossils such as Diplocraterion. The fauna comprised endemic mollusks, including brackish cockles of the subfamily Lymnocardiinae, dreissenid mussels (Congeria), and highly adapted, uniquely large-sized deep-water pulmonate snails (planorbids and lymnaeids). Ostracods were dominated by endemic species and, in some cases, endemic genera of candonids, leptocytherids, cypridids, and loxoconchids. Fish remnants include a sciaenid otolith and the oldest skeletal occurrence of Perca in Europe. The phytoplankton comprised exclusively endemic coccolithophorids, mostly endemic dinoflagellates (prevailingly Spiniferites), and cosmopolitan green algae. The Late Miocene fauna and flora of Lake Pannon were in many ways similar to the modern Caspian biota, and in particular cases can be regarded as its precursor.     

On the breakdown of zircon upon “dry” thermal annealing

Zircon samples without and with secondary chemical alteration from diverse sources were subjected to heat treatment at 1400 °C for 96 h. Resulting new phases and textures suggest that decomposition of zircon into component oxides occurred in all experiments to various degrees. The crucible material was found to have a strong influence on the extent of breakdown, especially in the case of altered starting materials. In this study the progressive stages of the breakdown of zircon grains are described. The factors that may govern the decomposition are discussed, including radiation damage, secondary alteration and external reaction conditions (sample container, atmosphere). Alumina crucibles should generally be avoided in dry annealing of zircon, to minimise uncontrolled breakdown into oxides.     

Low velocity shock-cloud encounters I.

Shocks propagating in the interstellar medium (ISM) play an important role in the life of molecular clouds. Through a theoretical study of interaction between clouds and shocks we can understand, for example, the density distribution of observed molecular clouds and the first steps of star formation. The only way to study of interaction in detail is via a numerical hydrodynamical simulation. In this paper we present the first results of a hydrocode which is able to follow the processes after the collision between the cloud and shock front.Our main theoretical result is that the chemical processes (e.g. H<sub>2sub> dissociation) can affect the dynamical processes significantly. Global parameters of the cloud are calculated for the comparision of the simulation and the observations.