Differential utilization of a shallow-water pulse by six shrub species in the Patagonian steppe

A field experiment was performed to improve understanding of the functional diversity of western Patagonian shrubs. Anarthrophyllum rigidum, Adesmia volckmanni, Berberis heterophylla, Mulinum spinosum, Schinus poligamus and Senecio filaginoides were compared in their capacity to absorb water from a 10-mm pulse enriched in deuterium and applied at the beginning of the dry summer. Xylem-water enrichment 14 days after watering was rather subtle, but the upper-soil signal was clear enough to distinguish shallow from deeper absorption. According to a linear mixing model, the proportion of surface-pulse water relative to total water uptake was maximum for Senecio (29-38%) and Mulinum (22-32%), both relatively shallow-rooted species, intermediate for Berberis (16-17%) and Schinus (6-9%), and negligible for the two N-fixing Fabaceae: Adesmia (<1%) and Anarthrophyllum (<3%), despite this last one having a dimorphic (tap + shallow) root system. It is hypothesized that shallow-water pulses may be more profitable in terms of nitrogen than of water, and thus constitute a higher-quality resource for those species only able to use N from soil sources.     

The effects of undercooling and deformation rates on the crystallization kinetics of Stromboli and Etna basalts

We have investigated the effect of undercooling and deformation on the evolution of the texture and the crystallization kinetics of remelted basaltic material from Stromboli (pumice from the March 15, 2007 paroxysmal eruption) and Etna (1992 lava flow). Isothermal crystallization experiments were conducted at different degrees of undercooling and different applied strain rate (T = 1,157–1,187 °C and $ \dot{\gamma }_{i} $ γ · i  = 4.26 s^?1 for Stromboli; T = 1,131–1,182 °C and $ \dot{\gamma }_{i} $ γ · i  = 0.53 s^?1 for Etna). Melt viscosity increased due to the decrease in temperature and the increase in crystal content. The mineralogical assemblage comprises Sp + Plg (dominant) ± Cpx with an overall crystal fraction (?) between 0.06 and 0.27, increasing with undercooling and flow conditions. Both degree of undercooling and deformation rate deeply affect the kinetics of the crystallization process. Plagioclase nucleation incubation time strongly decreases with increasing ΔT and flow, while slow diffusion-limited growth characterizes low ΔT—low deformation rate experiments. Both Stromboli (high strain rate) and Etna (low strain rate) plagioclase growth rates (G) display relative small variations with Stromboli showing higher values (4.8 ± 1.9 × 10^?9 m s^?1) compared to Etna (2.1 ± 1.6 × 10^?9 m s^?1). Plagioclase average nucleation rates J continuously increase with undercooling from 1.4 × 10⁶ to 6.7 × 10⁶ m^?3 s^?1 for Stromboli and from 3.6 × 10⁴ to 4.0 × 10⁶ m^?3 s^?1 for Etna. The extremely low value of 3.6 × 10⁴ m^?3 s^?1 recorded at the lowest undercooling experiment for Etna (ΔT = 20 °C) indicates that the crystallization process is growth-dominated and that possible effects of textural coarsening occur. G values obtained in this paper are generally one or two orders of magnitude higher compared to those obtained in the literature for equivalent undercooling conditions. Stirring of the melt, simulating magma flow or convective conditions, facilitates nucleation and growth of crystals via mechanical transportation of matter, resulting in the higher J and G observed. Any modeling pertaining to magma dynamics in the conduit (e.g., ascent rate) and lava flow emplacement (e.g., flow rate, pāhoehoe–‘a‘ā transition) should therefore take the effects of dynamic crystallization into account.     

Analysis of anisotropy of magnetic susceptibility in iron-oolitic beds: a potential tool for paleocurrent identification

A combined sedimentological, shape-preferred orientation and anisotropy of magnetic susceptibility (AMS) analysis has been performed at the Arroyofrío Bed (Callovian–Oxfordian boundary level) in the locality of Moneva (Iberian Range, NE Spain). The Arroyofrío bed is a widespread iron-ooid limestone interval forming a condensed sequence. The present study has focused on the analysis of the potential presence of a preferred ooid orientation at the Arroyofrío bed. The obtained data show that ooids were originally ellipsoidal and had an imbricate disposition with respect to the bedding/lamination surface. The main ooid orientation within the bedding plane shows a NNE–SSW trend. Results of AMS analyses show a magnetic foliation parallel or slightly imbricated with respect to bedding and magnetic lineation parallel to the main ooid orientation. Magnetic mineralogy of studied samples shows that AMS is mainly controlled by magnetite with minor contributions of hematite and paramagnetic minerals (that can reach contributions of 35 %). The analyzed ooids show axial ratios between 1.4 and 2.8 (intrinsic anisotropy), while the anisotropy of their distribution shows lower anisotropies (e.g., Rs = 1.15) or very low values of the anisotropic magnetic parameters (e.g., P′ < 1.01). Sedimentary texture, matrix features, bioturbation and fossil content influenced both ooid main orientation and the magnetic fabric. Magnetic lineation and main orientation of long ooid axes are transverse to the inferred coastline in the studied area and parallel to the expected paleocurrent direction with respect to the Ejulve-Maestrazgo paleogeographic high. The direct correlation between AMS magnetic lineation and the ooid analysis permits to demonstrate that the paleocurrent imprint can be recorded by means of AMS despite the highly ferromagnetic context fabric and at coarse deposits. Obtained results support the interest and reliability of AMS to unravel paleocurrent imprints for paleogeographic reconstructions.     

Rheological control on the tectonic evolution of a continental suture zone: the Variscan example from NW Iberia (Spain)

The Variscan continental suture zone exposed in NW Iberia is examined to uncover the long-lived rheological control exerted by the strata deposited over the external parts of Gondwana on its geodynamic evolution. The suture occurs within a set of allochthonous terranes whose limits were taken as domain boundaries to interpret the Variscan stacking of Paleozoic continental domains and retrodeform the resulting nappe pile. The suture zone formed due to closure of ocean basins located between Gondwana and Laurussia during the Late Paleozoic and consists of relics of oceanic and transitional crust. The suture zone exhibits a tabular to lens shape due to repeated tectonic events dominated by non-coaxial deformation (thrusts and low-angle normal faults). Thrusting and normal faulting also involved the margins of the continents bounding the suture. The structure of the continental blocks, however, is dominated by folds, particularly large nappe folds with pronounced superimposed flattening. The upper part of the basal allochthonous units comprises a rheologically incompetent domain below the suture zone. This domain is typified by the carbonaceous-rich strata, which are probably Ordovician–Silurian sediments based on U–Pb detrital zircon populations. The rheology of this layer determined the location of the first accretionary thrust that initiated the Late Devonian subduction of the Gondwana margin below the suture zone. By favoring fault development, the upper sequence of the basal allochthonous units as a whole influenced the exhumation of deep-seated continental crust, the transference of the suture zone over Gondwana, and the re-equilibration of the resulting overthickened crust.     

Performance enhancement of a GIS-based facility location problem using desktop grid infrastructure

This paper presents the integration of desktop grid infrastructure with GIS technologies, by proposing a parallel resolution method in a generic distributed environment. A case study focused on a discrete facility location problem, in the biomass area, exemplifies the high amount of computing resources (CPU, memory, HDD) required to solve the spatial problem. A comprehensive analysis is undertaken in order to analyse the behaviour of the grid-enabled GIS system. This analysis, consisting of a set of the experiments on the case study, concludes that the desktop grid infrastructure is able to use a commercial GIS system to solve the spatial problem achieving high speedup and computational resource utilization. Particularly, the results of the experiments showed an increase in speedup of fourteen times using sixteen computers and a computational efficiency greater than 87 % compared with the sequential procedure.     

Web-GIS tool for the management of rural land markets

Land abandonment and stagnation of rural markets in the last few years have become one of the main concerns of rural administrations. The use of Web and GIS (Geographic Information System) technologies can help to mitigate the effects of these problems. This paper pro-poses a novel Web-GIS tool with spatial capabilities for the dynamization of rural land markets by encouraging the transfer of land from owners to farmers through the leasing of plots. The system, based on open source software, offers information about the properties, their environment and their owners. It uses standards for handling the geographic information and for communicating with external data sources. This system was used as the basis for the development of SITEGAL, the tool for the management of the Land Bank of Galicia (www.bantegal.com/sitegal). SITEGAL has been operational since 2007 obtaining benefits for both administration and users (farmers and land owners), and promoting the e-Government.     

Effects of the 'Prestige' oil spill on macroalgal assemblages: large-scale comparison

An assessment of the effects of the 'Prestige' oil spill on intertidal, macroalgal assemblages was carried out comparing abundance data obtained before and after the spill. Four zones in the North and Northwest coast of Spain were sampled, one of them located at the immediate vicinity of the spill, the zone most heavily oiled. Macroalgal assemblages had similar structure between years. Neither critical decrease in abundance of the dominant macroalgae, nor increase in opportunistic species were found. Some differences in abundance were observed, but they did not show any pattern, being more likely the result of the natural variability of the assemblage. Extensive, but not intense fuel deposition on the shores and a limited use of aggressive cleanup methods are suggested as possible causes for the lack of the effects in these assemblages after the 'Prestige' oil spill.     

Coseismic Three-Dimensional Displacements Determined Using SAR Data: Theory and an Application Test

We present a methodology to construct three-dimensional deformation maps using different parameters that can be extracted using SAR data. We apply the methodology using ENVISAT SAR data before and after the December 26^th, 2003 M_w 6.6 Bam earthquake in Iran to determine spatial quasi-continuous three-dimensional coseismic deformation maps. Two near vertical deformation offset components are computed using Envisat ASAR differential interferometry (DInSAR), while two horizontal deformation offset components are measured using sub-pixel correlation techniques applied to ASAR amplitude images. Using the presented methodology, we combine four unevenly precise independent projections of surface coseismic deformation to obtain the full three-dimensional coseismic deformation field caused by an earthquake. The full 3-D coseismic displacement vector is modeled using elastic deformation models constraining details of the fault geometry and slip distribution at depth. Results from the inversion are interpreted in the framework of the Iranian present-day tectonism. Full exploitation of dense 3-D coseismic surface deformation using SAR data, even for moderate earthquakes, should facilitate distinguishing between different interpretations of the mechanical properties of seismically active areas and within the inherent ambiguity of the geophysical inversion solutions.