The effect of a topographic high on the morphological stability of a two-inlet bay system

The cross-sectional stability of two tidal inlets connecting the same back-barrier lagoon to the ocean is investigated. The condition for equilibrium is the cross-sectional area tidal prism relationship. In an earlier study [Van de Kreeke, J., 1990. Can multiple inlets be stable? Estuarine, Coastal and Shelf Science 30: 261–273.], using the same equilibrium condition, it was concluded that where two inlets connect the same basin to the ocean ultimately one inlet will close. One of the major assumptions in that study was that the water level in the basin fluctuated uniformly. In hindsight this assumption might be too restrictive. For example, in the Wadden Sea the back barrier lagoon consists of a series of basins, rather than one single basin, separated by topographic highs. These topographic highs limit but do not exclude the exchange of water between the sub-basins. For this reason in the present study, a topographic high in the form of a weir was added, separating the back-barrier lagoon in two sub-basins. The water level in the sub-basins, rather than in the back-barrier as a whole, is assumed to fluctuate uniformly. For this schematization the hydrodynamic equations are solved using a finite difference method. The results, together with the equilibrium condition, yield the equilibrium flow curve for each of the inlets. The intersections of the two equilibrium flow curves represent combinations of cross-sectional areas for which both inlets are in equilibrium. The stability of the equilibriums was investigated using a non-linear stability analysis resulting in a flow diagram. Calculations were carried out for different inlet and weir characteristics. Sinussoidal tides were the same for both inlets. The results show that for relatively large wetted cross-sectional areas over the topographic high, approaching the situation of a single basin, there are no combinations of inlet cross-sectional areas for which both inlets are in a stable equilibrium. This supports the conclusion in the earlier study. For relatively small wetted cross-sectional areas over the topographic high there is one set of stable equilibriums. In that case the two-inlet bay system approaches that of two single-inlet bay systems.     

Large-scale dune erosion tests to study the influence of wave periods

Large-scale physical model tests were performed to quantify the effects of the wave period on dune erosion. Attention was focussed on 2D cross-shore effects in a situation with sandy dunes and extreme water levels and wave conditions. Besides profile measurements, detailed measurements in time and space of water pressure, flow velocities and sediment concentrations were performed in the near near-shore area. It was concluded that a longer wave period leads to a larger dune erosion volume and to a larger landward retreat of the dune face. Tests with double-peaked wave spectra showed that the influence of the spectral shape on dune erosion was best represented by the T_m − 1,0 spectral mean wave period, better than the peak wave period, T_p. The effect of the wave period on dune erosion was implemented in a dune erosion prediction method that estimates erosion volumes during normative storm conditions for the Dutch coast. More details of the measurements and additional analyses of physical processes are described in an accompanying paper by Van Thiel de Vries et al. [Van Thiel de Vries, J.S.M., van Gent, M.R.A., Reniers, A.J.H.M. and Walstra, D.J.R., submitted for publication. Analysis of dune erosion processes in large scale flume experiments, In this volume of Coastal Engineering.].     

Developing a building policy for the erosion zone: Solutions to some key (Dutch) questions

In those coastal communities where the most seaward strip of mainland consists of dunes, these dunes often serve as a flexible sea defence. In addition, this strip offers large potential for housing and commercial enterprises. Unfortunately, due to severe storm surges part of this strip (the erosion zone) is subject to erosion, and as a result of which any buildings or infrastructure located here, are destroyed. Therefore, as we will illustrate in this paper, a building policy for this zone should reflect a compromise between two opposite interests: exploitation of the existing potential and, prevention of an unacceptable high risk due to erosion. Accordingly, the authors have developed a framework for such a building policy on the basis of which the desirability of various different types of investments and the location within the erosion zone of such investments can be determined. The examples that are used to illustrate this framework in this paper are limited to experiences in The Netherlands as relevant data and experiences are available and relatively easy accessible here. Nevertheless, the approach as is described is generic and applicable worldwide suggesting that the discovered unused potential for exploitation is not just limited to The Netherlands.     

Dissolved aluminium and the silicon cycle in the Arctic Ocean

Concentrations of dissolved (0.2 µm filtered) aluminium (Al) have been determined for the first time in the Eurasian part of the Arctic Ocean over the entire water column during expedition ARK XXII/2 aboard R.V. Polarstern (2007). An unprecedented number of 666 samples was analysed for 44 stations along 5 ocean transects. Dissolved Al in surface layer water (SLW) was very low, close to 1 nM, with lowest SLW concentrations towards the Canadian part of the Arctic Ocean and higher values adjacent to and in the shelf seas. The low SLW concentrations indicate no or little influence from aeolian dust input. Dissolved Al showed a nutrient-type increase with depth up to 28 nM, but large differences existed between the different deep Arctic basins. The differences in concentrations of Al between water masses and basins could largely be related to the different origins of the water masses. In the SLW and intermediate water layers, Atlantic and Pacific inflows were of importance. Deep shelf convection appeared to influence the Al distribution in the deep Eurasian Basin. The Al distribution of the deep Makarov Basin provides evidence for Eurasian Basin water inflow into the deep Makarov Basin. A strong correlation between Al and Silicon (Si) was observed in all basins. This correlation and the nutrient-like profile indicate a strong biological influence on the cycling and distribution of Al. The biological influence can be direct by the incorporation of Al in biogenic silica, indirect by preferential scavenging of Al onto biogenic siliceous particles, or by a combination of both processes. From the slope of the overall Al–Si relationship in the intermediate water layer (AIDW; ~ 200–2000 m depth), an Al/Si ratio of 2.2 atoms Al per 1000 atoms Si was derived. This ratio is consistent with the range of previously reported Al/Si uptake ratio in biogenic opal frustules of diatoms. In the deepest waters (>2000 m depth) a steeper slope of the Al–Si relationship of 7.4 to 13 atoms Al per 1000 atoms Si likely results from entrainment of cold shelf water into the deep basins, carrying the signal of dissolution of terrigenous particles with a much higher Al:Si ratio of crustal abundance. Only a small enrichment with such crustal Al and Si component may readily account for the higher Al:Si slope in the deepest waters.     

A control-volume finite-element method for three-dimensional multiphase basin modeling

In this paper we describe a 3D control-volume finite-element method to solve numerically the coupled partial differential equations (PDEs) governing geological processes involved in the evolution of sedimentary basins. These processes include sediment deposition and deformation, hydrocarbon generation, multiphase fluid flow, and heat transfer in deforming porous media.     

Orbite de L'Étoile Burnham 1164 – ADS 1156 B–765 (95 Piscium)

The physical and orbital elements of the binary star ADS 1156 = B 1164 (α₁₉₀₀ = 01^h 22^m.0, δ₁₉₀₀ = + 04°50′) are determined. The absolute visual magnitudes of the two components are 3^m.72 resp. 3^m.97, the masses 1.43 M⊙ resp. 1.33 M⊙.     

Characterisation and preliminary quantification of the methane reservoir in a coastal sedimentary source: San Simón Bay,Ría de Vigo,NW Spain

Ría de Vigo is a river valley flooded by the sea, with a bay (San Simón Bay) at its innermost part. The accumulation of Holocene sediment in San Simón Bay has been studied by the integration of 1) large scale high resolution seismic data, and 2) detailed geochemical analysis of a gravity core. In San Simón Bay the majority of the seismic records are obscured by acoustic turbidity which represents gassy sediments, but on records from Rande Strait it is possible to distinguish two Quaternary seismic sequences; an Upper Pleistocene sequence (SQ1) and a Holocene sequence (SQ2). Only SQ2 is recognized in San Simón Bay where it is comprised of two seismic units; the upper unit represents the HST sediment, i.e. the period of highest sea level. A gravity core taken within the gassy zone at 10 m water depth provided 3.55 m of fine-grained sediments (muds) from the youngest seismic unit (4 m thick). Geochemical analysis show high values (4 to 10%) of TOC. Sediment and porewater analyses indicate a distinct sulphate–methane transition zone (SMTZ) between 60 and 80 cm where sulphate is depleted (to <1.7 mM) and methane increases (to >0.4 mM). The top of the acoustic turbidity (the gas front) at 80 cm corresponds to the lower limit of the SMTZ. The methane cannot have been derived from the underlying metamorphic and granitic rocks, but was probably derived by microbial degradation of the organic matter in the Holocene sediments. We estimate that the sediments of the Bay contain approximately 1.8 × 10⁶ m³ of organic carbon and 275 ton of methane.     

Conservation Priority Index for Estuarine Fish (COPIEF)

Public awareness regarding environmental issues has increased in recent decades. The increasing number of impact assessment studies, management and conservation plans, as well as ecological monitoring studies, demand new and more efficient techniques. Indices are an important tool to aid biologists in these studies and should allow an easier comprehension of the data by managers, decision-makers and the general public. This study presents the first multi-metrical index able to establish a hierarchical ordination of the conservation priority of the estuarine fish species using 72 species from 16 estuarine systems (W and S coasts of Portugal). The index is composed of 10 metrics, comprising species life traits, distribution and population trends. The information needed to score each metric was gathered from the published literature and the index validation was done by external means. This methodology allowed the definition of those fish species most in need of conservation planning, and those less prone to extinction in Portuguese estuarine systems. The proposed index fills a gap in our knowledge and provides a useful tool to the scientific community and to the decision-makers, being a breakthrough in the field of conservation planning of estuarine fish species.