Distribution and effectiveness of nivation in Mediterranean mountains: Peñalara (Spain)

Snow accumulation is responsible for geomorphic and biogeographic processes taking place in the southern sector of the Peñalara massif in central Spain (40°51′N, 3°57′W; max. altitude 2428 m at Pico de Peñalara). This work compares the intensity of nivation on the eastern slope, leeward of the prevailing westerly winds and heavily eroded by glacial activity during the Pleistocene, to that of the western slope on the windward side, unaffected by glacial erosion and completely covered by a thick weathering mantle. On the eastern slope, nivation is effective only where the weathering mantle is exposed or on morainic formations. It does not occur on the landforms derived from glacial erosion. In contrast, the western side shows almost no evidence of snow action except where catastrophic mass movements have altered the regularity of the slope. During the post-glacial epoch, nivation cirques formed in the scars left by mass wasting. In the last 30 years, spring temperatures have increased and this activity has diminished. The pattern of evolution observed at Peñalara can be extrapolated to other Mediterranean mountains with similar characteristics such as marginal glacial activity during the Pleistocene, unconsolidated formations on the summits caused by chemical weathering, and dry, hot summers that can increase the effectiveness of nivation.     

Coseismic and post-seismic signatures of the Sumatra 2004 December and 2005 March earthquakes in GRACE satellite gravity

The GRACE satellite mission has been measuring the Earth's gravity field and its temporal variations since 2002 April. Although these variations are mainly due to mass transfer within the geofluid envelops, they also result from mass displacements associated with phenomena including glacial isostatic adjustment and earthquakes. However, these last contributions are difficult to isolate because of the presence of noise and of geofluid signals, and because of GRACE's coarse spatial resolution (>400 km half-wavelength). In this paper, we show that a wavelet analysis on the sphere helps to retrieve earthquake signatures from GRACE geoid products. Using a wavelet analysis of GRACE geoids products, we show that the geoid variations caused by the 2004 December ( M _w= 9.2) and 2005 March ( M _w= 8.7) Sumatra earthquakes can be detected. At GRACE resolution, the 2004 December earthquake produced a strong coseismic decrease of the gravity field in the Andaman Sea, followed by relaxation in the area affected by both the Andaman 2004 and the Nias 2005 earthquakes. We find two characteristic timescales for the relaxation, with a fast variation occurring in the vicinity of the Central Andaman ridge. We discuss our coseismic observations in terms of density changes of crustal and upper-mantle rocks, and of the vertical displacements in the Andaman Sea. We interpret the post-seismic signal in terms of the viscoelastic response of the Earth's mantle. The transient component of the relaxation may indicate the presence of hot, viscous material beneath the active Central Andaman Basin.     

Holocene rockfalls in the southern Negev Desert,Israel and their relation to Dead Sea fault earthquakes

Rockfall ages in tectonically active regions provide information regarding frequency and magnitude of earthquakes. In the hyper-arid environment of the Dead Sea fault (DSF), southern Israel, rockfalls are most probably triggered by earthquakes. We dated rockfalls along the western margin of the DSF using terrestrial cosmogenic nuclides (TCN). At each rockfall site, samples were collected from simultaneously exposed conjugate boulders and cliff surfaces. Such conjugate samples initially had identical pre-fall (“inherited”) TCN concentrations. After boulder detachment, these surfaces were dosed by different production rates due to differences in post-fall shielding and geometry. However, in our study area, pre-rockfall inheritance and post-rockfall production rates of TCN cannot be evaluated. Therefore, we developed a numerical approach and demonstrated a way to overcome the above-mentioned problems. This approach can be applied in other settings where rockfalls cannot be dated by simple exposure dating. Results suggest rockfall ages between 3.6 ± 0.8 and 4.7 ± 0.7 ka. OSL ages of sediment accumulated behind the boulders range between 0.6 ± 0.1 and 3.4 ± 1.4 ka and support the TCN results. Our ages agree with dated earthquakes determined in paleoseismic studies along the entire length of the DSF and support the observation of intensive earthquake activity around 4–5 ka.     

A new scheme for numerical modelling of flow and transport processes in 3D fractured porous media

The objective of this work is to develop a new numerical approach for the three-dimensional modelling of flow and transient solute transport in fractured porous media which would provide an accurate and efficient treatment of 3D complex geometries and inhomogeneities. For this reason, and in order to eliminate as much as possible the number of degrees of freedom, the fracture network, fractures and their intersections, are solved with a coupled 2D–1D model while the porous matrix is solved independently with a 3D model. The interaction between both models is accounted for by a coupling iterative technique. In this way it is possible to improve efficiency and reduce CPU usage by avoiding 3D mesh refinements of the fractures. The approach is based on the discrete-fracture model in which the exact geometry and location of each fracture in the network must be provided as an input. The formulation is based on a multidimensional coupling of the boundary element method-multidomain (BEM-MD) scheme for the flow and boundary element dual reciprocity method-multidomain (BE-DRM-MD) scheme for the transport. Accurate results and high efficiency have been obtained and are reported in this paper.     

铁锰氧化物在污染土壤修复中的作用

矿物学在环境科学中的应用将是21世纪矿物学研究的一个主要方面。土壤污染作为一个制约人类社会可持续发展的基本问题正受到日益广泛的关注，污染土壤的修复已成为环境科学研究的一个重点。污染土壤的修复技术主要有物理、化学、生物等方法，但是，它们都不同程度地存在着缺陷。众所周知，铁和锰是自然界中少数但常见的变价元素。含有变价元素和带有表面电荷的铁锰氧化物具有良好的表面活性，不仅对有毒有害的无机污染物具有良好的净化功能，而且对土壤中有机污染物具有氧化降解作用。利用这些矿物来修复污染土壤，具有成本低、无二次污染等优点，体现出天然净化作用的特色，展现出广阔的环境矿物学应用前景。     

The sheltering effect of the Balearic Islands in the hindcast wave field

The sheltering effect of the Balearic Islands in the hindcast wave field was studied for typical Mediterranean wave situations of Llevant, Tramuntana and Mestral and for mild conditions such as the Garbí and Ponent winds. For this purpose, a third generation wave model was applied to the Mediterranean Sea and different patterns of the sheltered areas were found for the various representative situations depending on the wind variability and on the magnitude of the wind speed. From the analysis it was concluded that the sheltered zones created during storms generally persist for short periods of time of the order of 6 h, possibly reaching a maximum of 12 h. In contrast with earlier results obtained for swell dominated ocean areas, it was observed that in this area, due to the short fetches the sea states are mainly local wind seas and thus the wave field behind the islands depends on the local wind.     

Towards more systematic perceptual model development: a case study using 3 Luxembourgish catchments

The synthesis of experimental understanding of catchment behaviour and its translation into qualitative perceptual models is an important objective of hydrological sciences. We explore this challenge by examining the cumulative understanding of the hydrology of three experimental catchments and how it evolves through the application of different investigation techniques. The case study considers the Huewelerbach, Weierbach and Wollefsbach headwater catchments of the Attert basin in Luxembourg. Subsurface investigations including bore holes and pits, analysis of soil samples and Electrical Resistivity Tomography measurements are presented and discussed. Streamflow and tracer data are used to gain further insights into the streamflow dynamics of the catchments, using end‐member mixing analysis and hydrograph separation based on dissolved silica and electrical conductivity. We show that the streamflow generating processes in all three catchments are controlled primarily by the subsolum and underlying bedrock. In the Huewelerbach, the permeable sandstone formation supports a stable groundwater component with little seasonality, which reaches the stream through a series of sources at the contact zone with the impermeable marls formation. In the Weierbach, the schist formation is relatively impermeable and supports a ‘fill and spill’‐type of flow mechanism; during wet conditions, it produces a delayed response dominated by pre‐event water. In the Wollefsbach, the impermeable marls formation is responsible for a saturation‐excess runoff generating process, producing a fast and highly seasonal response dominated by event water. The distinct streamflow generating processes of the three catchments are represented qualitatively using perceptual models. The perceptual models are in turn translated into quantitative conceptual models, which simulate the hydrological processes using networks of connected reservoirs and transfer functions. More generally, the paper illustrates the evolution of perceptual models based on experimental fieldwork data, the translation of perceptual models into conceptual models and the value of different types of data for processes understanding and model representation. Copyright © 2014 John Wiley & Sons, Ltd.     

Multiparametric Traveltime Inversion

In conventional seismic processing, the classical algorithm of Hubral and Krey is routinely applied to extract an initial macrovelocity model that consists of a stack of homogeneous layers bounded by curved interfaces. Input for the algorithm are identified primary reflections together with normal moveout (NMO) velocities, as derived from a previous velocity analysis conducted on common midpoint (CMP) data. This work presents a modified version of the Hubral and Krey algorithm that is designed to extend the original version in two ways, namely (a) it makes an advantageous use of previously obtained common-reflection-surface (CRS) attributes as its input and (b) it also allows for gradient layer velocities in depth. A new strategy to recover interfaces as optimized cubic splines is also proposed. Some synthetic examples are provided to illustrate and explain the implementation of the method.