The Dead Sea Basin is a morphotectonic depression along the Dead Sea Transform. Its structure can be described as a deep rhomb-graben (pull-apart) flanked by two block-faulted marginal zones. We have studied the recent tectonic structure of the northwestern margin of the Dead Sea Basin in the area where the northern strike-slip master fault enters the basin and approaches the western marginal zone (Western Boundary Fault). For this purpose, we have analyzed 3.5-kHz seismic reflection profiles obtained from the northwestern corner of the Dead Sea. The seismic profiles give insight into the recent tectonic deformation of the northwestern margin of the Dead Sea Basin. A series of 11 seismic profiles are presented and described. Although several deformation features can be explained in terms of gravity tectonics, it is suggested that the occurrence of strike-slip in this part of the Dead Sea Basin is most likely. Seismic sections reveal a narrow zone of intensely deformed strata. This zone gradually merges into a zone marked by a newly discovered tectonic depression, the Qumran Basin. It is speculated that both structural zones originate from strike-slip along right-bending faults that splay-off from the Jordan Fault, the strike-slip master fault that delimits the active Dead Sea rhomb-graben on the west. Fault interaction between the strike-slip master fault and the normal faults bounding the transform valley seems the most plausible explanation for the origin of the right-bending splays. We suggest that the observed southward widening of the Dead Sea Basin possibly results from the successive formation of secondary right-bending splays to the north, as the active depocenter of the Dead Sea Basin migrates northward with time. 相似文献
Hydrous pyrolysis of asphaltenes has been tested as a method to reconstruct the chemical composition of biodegraded oils and oil seeps. The asphaltenes of three oils (a nondegraded oil, a biodegraded oil, and a biodegraded oil seep) from the Monterey Formation were studied. Results show that the aliphatic fraction generated by hydrous pyrolysis is very similar in chemical composition to the non-degraded oil. This makes the method very useful in correlation studies of biodegraded and nondegraded oils. It also allows to roughly estimate the maturity of the source of the biodegraded oil or oil seep. 相似文献
The Dead Sea rift is considered to be a plate boundary of the transform type. Several key questions regarding its structure and evolution are: Does sea floor spreading activity propagate from the Red Sea into the Dead Sea rift? Did rifting activity start simultaneously along the entire length of the Dead Sea rift, or did it propagate from several centres? Why did the initial propagation of the Red Sea into the Gulf of Suez stop and an opening of the Gulf of Elat start?
Using crustal structure data from north Africa and the eastern Mediterranean and approximating the deformation of the lithosphere by a deformation of a multilayer thin sheet that overlies an inviscid half-space, the regional stress field in this region was calculated. Using this approach it is possible to take into account variations of lithospheric thickness and the transition from a continental to an oceanic crust. By application of a strain-dependent visco-elastic model of a solid with damage it is possible to describe the process of creation and evolution of narrow zones of strain rate localization, corresponding to the high value of the damage parameter i.e. fault zones.
Mathematical simulation of the plate motion and faulting process suggests that the Dead Sea rift was created as a result of a simultaneous propagation of two different transforms. One propagated from the Red Sea through the Gulf of Elat to the north. The other transform started at the collision zone in Turkey and propagated to the south. 相似文献
In the eastern Mediterranean the collision of the Erastosthenes and the Anaximander Seamounts with the Cyprus arc results in a unique tectonic setting due to the small size of the eastern Mediterranean basin. As a result of the collision, some of the motion between the African plate and the Eurasian plate is taking place by thrust faulting along the north African passive margin. It seems that the stress at the plate boundary along the Cyprus arc may be transmitted southward to cause the reactivation of a pre-existing fault zone along the passive margin of eastern north Africa.
Zusammenfassung Im östlichen Mittelmeerbecken hat die Kollision des Erastosthenes und des Anaximander Seamounts mit dem Cypern-Bogen eine spezielle tektonische Situation geschaffen, die durch den engen Raum dieses Beckens bestimmt wird. Als Ergebnis dieser Kollision erscheinen Überschiebungen der Afrikanischen Platte auf Eurasische Platte entlang des passiven nordafrikanischen Randes. Es erscheint möglich, daß das Streßfeld an der Plattengrenze entlang des Zypernbogens südwärts wirkt und dadurch die alte Störungszone entlang des passiven Kontinentrandes von Nordafrika reaktiert wird.
Résumé En Méditerrannée orientale, la collision des guyots Eratosthène et Anaximandre avec l'arc de Chypre a engendré une situation tectonique particulière, due à la faible dimension du bassin est-méditerrannéen. Cette collision a eu pour conséquence la production de charriages de la plaque africaine sur la plaque eurasiatique le long de la marge passive nord-africaine. Il semble que les contraintes règnant au bord de la plaque le long de l'arc de Chypre se soient transmises vers le Sud pour y provoquer la réactivation d'une zône failleuse préexistante le long de la marge passive du NE de l'Afrique.
The Dead Sea basin is often cited as one of the classic examples for the evolution of pull-apart basins along strike–slip faults. Despite its significance, the internal structure of the northern Dead Sea basin has never been addressed conclusively. In order to produce the first comprehensive, high-resolution analysis of this area, all available seismic data from the northern Dead Sea (lake)–lower Jordan valley (land) were combined. Results show that the northern Dead Sea basin is comprised of a system of tectonically controlled sub-basins delimited by the converging Western and Eastern boundary faults of the Dead Sea fault valley. These sub-basins grow shallower and smaller to the north and are separated by structural saddles marking the location of active transverse faults. The sedimentary fill within the sub-basins was found to be relatively thicker than previously interpreted. As a result of the findings of this study, the “classic” model for the development of pull-aparts, based on the Dead Sea, is revised. The new comprehensive compilation of data produced here for the first time was used to improve upon existing conceptual models and may advance the understanding of similar basinal systems elsewhere. 相似文献
3-D simulations of elastic wave propagation generated by earthquakes with magnitudes between 5.5 and 7.0 are used to parameterize
strong ground motion attenuation relations for the Dead Sea Rift (DSR) graben structure. The results show that standard attenuation
relations with an isotropic distance parameter are inadequate for a graben structure with a deep sedimentary trough. A new
strategy is devised for the parameterization of attenuation relations in graben structures by looking at the statistical properties
of 53 simulated earthquakes of variable magnitudes located at various sites along the western boundary fault of the DSR graben.
An exemplary attenuation relation is designed from the synthetics for the 1 Hz spectral acceleration, modifying the Joyner-Boore-type
parametrization by adding coefficients suited for three different source-to-sensor configurations: within the graben, beyond
the graben and path unaffected by the graben structure. 相似文献
The efficiency of five aeolian sand samplers was tested via wind tunnel experiments and field measurements. The samplers were: the Big Spring Number Eight (BSNE) sampler, the Modified Wilson and Cooke (MWAC) sampler, the Suspended Sediment Trap (SUSTRA), the Pollet catcher (POLCA), and the saltiphone. In the wind tunnel, the samplers were calibrated against an isokinetic sampler (a modified Sartorius SM 16711 sampler with adjustable flow rate), and this for three sand types (median diameter: 132, 194 and 287 μm) and five wind speeds (ranging from 6.6 to 14.4 m s−1). In the field, seven calibration tests of two weeks each were conducted. The absolute efficiencies of the BSNE, MWAC and POLCA are more or less comparable and vary between 70% and 120%, depending on sediment size and wind speed. For the SUSTRA, the efficiency is somewhat lower for fine sands and for wind speeds above 11 m s−1. Finally, the saltiphone can accurately detect the periods of saltation transport, but in its current version, the instrument is not accurate when measuring the absolute saltation flux. The most recommendable sampler in the test is the MWAC, not only because of its high efficiency, but also because its efficiency is independent of wind speed. 相似文献
The Dead Sea is an extensional basin developing along a transform fault plate boundary. It is also a terminal salt basin. Without knowledge of precise stratigraphy, it is difficult to differentiate between the role of plate and salt tectonics on sedimentary accumulation and deformation patterns. While the environmental conditions responsible for sediment supply are reasonably constrained by previous studies on the lake margins, the current study focuses on deciphering the detailed stratigraphy across the entire northern Dead Sea basin as well as syn and post-depositional processes. The sedimentary architecture of the late Quaternary lacustrine succession was examined by integrating 851 km of seismic reflection data from three surveys with gamma ray and velocity logs and the stratigraphic division from an ICDP borehole cored in 2010. This allowed seismic interpretation to be anchored in time across the entire basin. Key surfaces were mapped based on borehole lithology and a newly constructed synthetic seismogram. Average interval velocities were used to calculate isopach maps and spatial and temporal sedimentation rates. Results show that the Amora Formation was deposited in a pre-existing graben bounded by two N-S trending longitudinal faults. Both faults remained active during deposition of the late Pleistocene Samra and Lisan Formations—the eastern fault continued to bound the basin while the western fault remained blind. On-going plate motion introduced a third longitudinal fault, increasing accommodation space westwards from the onset of deposition of the Samra Formation. During accumulation of these two formations, sedimentation rates were uniform over the lake and similar. High lake levels caused an increase in hydrostatic pressure. This led to salt withdrawal, which flowed to the south and southwest causing increased uplift of the Lisan and En Gedi diapirs and the formation of localized salt rim synclines. This induced local seismicity and slumping, resulting in an increased thickness of the Lisan succession within the lake relative to its margins. Sedimentation rates of the Holocene Ze'elim Fm were 4–5 times higher than before. The analysis presented here resolves central questions of spatial extent and timing of lithology, deposition rates and their variability across the basin, timing of faulting at and below the lake floor, and timing and extent of salt and plate tectonic phases and their effect on syn and post-depositional processes. Plate tectonics dictated the structure of the basin, while salt tectonics and sediment accumulation were primarily responsible for its fill architecture during the timeframe examined here. 相似文献