Time and place of progressive regional metamorphism: A discussion

That in areas of regional metamorphism thermal fronts surging from the depths invade the geosynclinal prism in the waning stage of its deformation and bring about re- and neocrystallization oftener than not outdating the penetrative movements, have been demonstrated time and again from metamorphic terrains of all ages and continents. In the present issue of this journal Dr. K.Naha describes a case from a polymetamorphic complex of Eastern Indian Precambrians, where the metamorphism is pictured to have taken place syn- to posttectonically with reference to the folding movements, regional thrusting following subsequently. It is pointed out that compelling evidence, leading to the conclusion that folding and metamorphism on the one hand and thrusting on the other belong to one and the same cycle of orogeny in his area, is yet to be presented. Such a proof, the onus of which lies withNaha, is indispensable before this unique sequence of regional metamorphism prior to diastrophic paroxysm may be claimed to have been established.

---

Zusammenfassung Studien in den verschiedensten Gebieten mit Regionalmetamorphose zeigen immer wieder, daß die metamorphe Kristallisation mit den Durchbewegungen beginnt und sie meist überdauert.Naha (in diesem Heft) beschreibt aus einem polymetamorphen Komplex einen Fall von — bezogen auf die Faltung — synbis posttektonischer Metamorphose, welcher eine regionale Überschiebung folgt. Damit ist aber noch nicht bewiesen, daß alle diese Vorgänge ein und demselben orogenen Zyklus angehören. Eine solche Beweisführung ist unerläßlich, um eine Metamorphose, die vor der Hauptphase der Tektonik stattfindet, glaubhaft erscheinen zu lassen.

---

Résumé Des recherches dans les schistes lustrés de la région du Simplon indiquent que de grandes déformations ont suivi la formation des nappes penniques. En même temps que ces déformations, apparaït une métamorphose (recristallisation et néocristallisation) qui dure plus longtemps que les processus tectoniques. Ceci confirme les observations faites dans d'autres régions alpines.Remarques critiques sur le travail deNaha (paru dans ce tome).

---

, . ( , ), .

     

Dimensional Reduction of Pattern-Based Simulation Using Wavelet Analysis

A pattern-based simulation technique using wavelet analysis is proposed for the simulation (wavesim) of categorical and continuous variables. Patterns are extracted by scanning a training image with a template and then storing them in a pattern database. The dimension reduction of patterns in the pattern database is performed by wavelet decomposition at certain scale and the approximate sub-band is used for pattern database classification. The pattern database classification is performed by the k-means clustering algorithm and classes are represented by a class prototype. For the simulation of categorical variables, the conditional cumulative density function (ccdf) for each class is generated based on the frequency of the individual categories at the central node of the template. During the simulation process, the similarity of the conditioning data event with the class prototypes is measured using the L ₂-norm. When simulating categorical variables, the ccdf of the best matched class is used to draw a pattern from a class. When continuous variables are simulated, a random pattern is drawn from the best matched class. Several examples of conditional and unconditional simulation with two- and three- dimensional data sets show that the spatial continuity of geometric features and shapes is well reproduced. A comparative study with the filtersim algorithm shows that the wavesim performs better than filtersim in all examples. A full-field case study at the Olympic Dam base metals deposit, South Australia, simulates the lithological rock-type units as categorical variables. Results show that the proportions of various rock-type units in the hard data are well reproduced when similar to those in the training image; when rock-type proportions between the training image and hard data differ, the results show a compromise between the two.     

Study on the Chemical Character of Water Soluble Organic Compounds in Fine Atmospheric Aerosol at the Jungfraujoch

In this study the chemical nature of the bulk of water soluble organic compounds in fine atmospheric aerosol collected during summer 1998 at the Jungfraujoch, Switzerland (3580 m asl) is characterised. The mass concentration of water soluble organic substances was similar to those of major inorganic ions, and the water soluble organic matter was found to be composed of two main fractions: (i) highly polyconjugated, acidic compounds with a varying degree of hydrophobicity and (ii) slightly polyconjugated, neutral and very hydrophilic compounds. The contribution of both fractions to the total water soluble organic carbon was about 50%. Separation into individual components was impossible either by HPLC or capillary electrophoresis which indicates the presence of a high number of chemically similar but not identical species. Results obtained by ultrafiltration and HPLC-MS have shown that the molecular weights are of the order of several hundreds. Most of the protonation constants for the acidic compounds determined by capillary electrophoresis were in the range 10⁴–10⁷.     

Spatio-temporal trends of rainfall across Indian river basins

Theoretical and Applied Climatology - Daily gridded high-resolution rainfall data of India Meteorological Department at 0.25° spatial resolution (1901–2015) was analyzed to detect the...     

Palaeocurrent and environmental implications from anisotropy of magnetic susceptibility (AMS): a case study from Talchir and Barakar formations,Raniganj Basin,West Bengal,India

Oriented cylindrical cores of rock samples were collected from the Talchir and Barakar formations of the Lower Gondwana Supergroup of the Raniganj Basin exposed in and around Kalyaneshwari and Maithon areas. The cores (2.54 cm diameter and 2.2 cm height) were studied in the low field anisotropy of magnetic susceptibility (AMS) measurement to determine the nature of magnetic fabrics, to correlate it with the sedimentological characteristics and to determine the palaeocurrent patterns. The results derived from the statistical parameters (especially the q-factor), the shapes of the susceptibility ellipsoids and directional data of the AMS indicate that the magnetic fabrics within the studied units are primary (depositional) and are correlatable form the palaeoenvironmental features. The orientation of the maximum (K₁), intermediate (K₂) and minimum (K₃) susceptibility axes is dispersed on the lower hemisphere equal area diagram rather than strong clusters which is not because of secondary (tectonic) influence but due to the moderate to high-energy environment of deposition of the sediments in the studied units. Based on the q-factor (which is 0.581 for Barakar Formation and 0.565 for Talchir Formation which are both <?0.7), it is suggested the AMS indicates that the imbrication of the K₁ axis is the indicator of palaeocurrent. Also, the magnetic foliation (average value?=?1.255) exceeds the magnetic lineation (average value?=?1.107) and the shape parameter exceeds 0 in most cases pointing towards an oblate fabric. The palaeocurrent in the present study as indicated by the K₁ axis imbrication is very similar in both the units under study and is due SW. However, apart from this precise palaeocurrent direction, there exists a certain degree of randomness of the susceptibility axes which are very clear indication of corresponding depositional environments.     

The longest voyage: Tectonic,magmatic, and paleoclimatic evolution of the Indian plate during its northward flight from Gondwana to Asia

The tectonic evolution of the Indian plate, which started in Late Jurassic about 167 million years ago (~ 167 Ma) with the breakup of Gondwana, presents an exceptional and intricate case history against which a variety of plate tectonic events such as: continental breakup, sea-floor spreading, birth of new oceans, flood basalt volcanism, hotspot tracks, transform faults, subduction, obduction, continental collision, accretion, and mountain building can be investigated. Plate tectonic maps are presented here illustrating the repeated rifting of the Indian plate from surrounding Gondwana continents, its northward migration, and its collision first with the Kohistan–Ladakh Arc at the Indus Suture Zone, and then with Tibet at the Shyok–Tsangpo Suture. The associations between flood basalts and the recurrent separation of the Indian plate from Gondwana are assessed. The breakup of India from Gondwana and the opening of the Indian Ocean is thought to have been caused by plate tectonic forces (i.e., slab pull emanating from the subduction of the Tethyan ocean floor beneath Eurasia) which were localized along zones of weakness caused by mantle plumes (Bouvet, Marion, Kerguelen, and Reunion plumes). The sequential spreading of the Southwest Indian Ridge/Davie Ridge, Southeast Indian Ridge, Central Indian Ridge, Palitana Ridge, and Carlsberg Ridge in the Indian Ocean were responsible for the fragmentation of the Indian plate during the Late Jurassic and Cretaceous times. The Réunion and the Kerguelen plumes left two spectacular hotspot tracks on either side of the Indian plate. With the breakup of Gondwana, India remained isolated as an island continent, but reestablished its biotic links with Africa during the Late Cretaceous during its collision with the Kohistan–Ladakh Arc (~ 85 Ma) along the Indus Suture. Soon after the Deccan eruption, India drifted northward as an island continent by rapid motion carrying Gondwana biota, about 20 cm/year, between 67 Ma to 50 Ma; it slowed down dramatically to 5 cm/year during its collision with Asia in Early Eocene (~ 50 Ma). A northern corridor was established between India and Asia soon after the collision allowing faunal interchange. This is reflected by mixed Gondwana and Eurasian elements in the fossil record preserved in several continental Eocene formations of India. A revised India–Asia collision model suggests that the Indus Suture represents the obduction zone between India and the Kohistan–Ladakh Arc, whereas the Shyok-Suture represents the collision between the Kohistan–Ladakh arc and Tibet. Eventually, the Indus–Tsangpo Zone became the locus of the final India–Asia collision, which probably began in Early Eocene (~ 50 Ma) with the closure of Neotethys Ocean. The post-collisional tectonics for the last 50 million years is best expressed in the evolution of the Himalaya–Tibetan orogen. The great thickness of crust beneath Tibet and Himalaya and a series of north vergent thrust zones in the Himalaya and the south-vergent subduction zones in Tibetan Plateau suggest the progressive convergence between India and Asia of about 2500 km since the time of collision. In the early Eohimalayan phase (~ 50 to 25 Ma) of Himalayan orogeny (Middle Eocene–Late Oligocene), thick sediments on the leading edge of the Indian plate were squeezed, folded, and faulted to form the Tethyan Himalaya. With continuing convergence of India, the architecture of the Himalayan–Tibetan orogen is dominated by deformational structures developed in the Neogene Period during the Neohimalayan phase (~ 21 Ma to present), creating a series of north-vergent thrust belt systems such as the Main Central Thrust, the Main Boundary Thrust, and the Main Frontal Thrust to accommodate crustal shortening. Neogene molassic sediment shed from the rise of the Himalaya was deposited in a nearly continuous foreland trough in the Siwalik Group containing rich vertebrate assemblages. Tomographic imaging of the India–Asia orogen reveals that Indian lithospheric slab has been subducted subhorizontally beneath the entire Tibetan Plateau that has played a key role in the uplift of the Tibetan Plateau. The low-viscosity channel flow in response to topographic loading of Tibet provides a mechanism to explain the Himalayan–Tibetan orogen. From the start of its voyage in Southern Hemisphere, to its final impact with the Asia, the Indian plate has experienced changes in climatic conditions both short-term and long-term. We present a series of paleoclimatic maps illustrating the temperature and precipitation conditions based on estimates of Fast Ocean Atmospheric Model (FOAM), a coupled global climate model. The uplift of the Himalaya–Tibetan Plateau above the snow line created two most important global climate phenomena—the birth of the Asian monsoon and the onset of Pleistocene glaciation. As the mountains rose, and the monsoon rains intensified, increasing erosional sediments from the Himalaya were carried down by the Ganga River in the east and the Indus River in the west, and were deposited in two great deep-sea fans, the Bengal and the Indus. Vertebrate fossils provide additional resolution for the timing of three crucial tectonic events: India–KL Arc collision during the Late Cretaceous, India–Asia collision during the Early Eocene, and the rise of the Himalaya during the Early Miocene.     

Fractional crystallization and mantle-melting controls on calc-alkaline differentiation trends

The phase relations of primitive magnesian andesites and basaltic andesites from the Mt. Shasta region, N California have been determined over a range of pressure and temperature conditions and H₂O contents. The experimental results are used to explore the influence of H₂O and pressure on fractional crystallization and mantle melting behavior in subduction zone environments. At 200-MPa H₂O-saturated conditions the experimentally determined liquid line of descent reproduces the compositional variation found in the Mt. Shasta region lavas. This calc-alkaline differentiation trend begins at the lowest values of FeO*/MgO and the highest SiO₂ contents found in any arc magma system and exhibits only a modest increase in FeO*/MgO with increasing SiO₂. We propose a two-stage process for the origin of these lavas. (1) Extensive hydrous mantle melting produces H₂O-rich (>4.5--6 wt% H₂O) melts that are in equilibrium with a refractory harzburgite (olivine + orthopyroxene) residue. Trace elements and H₂O are contributed from a slab-derived fluid and/or melt. (2) This mantle melt ascends into the overlying crust and undergoes fractional crystallization. Crustal-level differentiation occurs under near-H₂O saturated conditions producing the distinctive high SiO₂ and low FeO*/MgO characteristics of these calc-alkaline andesite and dacite lavas. In a subset of Mt. Shasta region lavas, magnesian pargasitic amphibole provides evidence of high pre-eruptive H₂O contents (>10 wt% H₂O) and lower crustal crystallization pressures (800 MPa). Igneous rocks that possess major and trace element characteristics similar to those of the Mt. Shasta region lavas are found at Adak, Aleutians, Setouchi Belt, Japan, the Mexican Volcanic Belt, Cook Island, Andes and in Archean trondhjemite--tonalite--granodiorite suites (TTG suites). We propose that these magmas also form by hydrous mantle melting.Editorial responsibility: J. Hoefs     

Deformation mechanisms of deeply buried and surface-piercing Late Pre-Cambrian to Early Cambrian Ara Salt from interior Oman

We compared microstructures of Late Pre-Cambrian to Early Cambrian Ara Salt diapirs from the deep subsurface (3.5–5 km) of the South Oman Salt Basin and from surface-piercing salt domes of the Ghaba Salt Basin. Laterally, these basins are approximately 500 km apart but belong to the same tectono-sedimentary system. The excellent data situation from both wells and outcrops allows a unique quantification of formation and deformation mechanisms, spanning from sedimentation to deep burial, and via re-activated diapir rise to surface piercement. Microstructures of gamma-irradiated and etched thin sections indicate dislocation creep and fluid-assisted grain boundary migration as the main deformation mechanisms operating in the deep subsurface. Microstructures from the surface are characterised by large ‘old’ subgrain-rich crystals. These ‘old’ grains are partly replaced by ‘new’ subgrain-free and subgrain-poor crystals, which show gamma irradiation-decorated growth bands and fibrous microstructures, indicative of pressure solution creep and static recrystallisation, most likely due to surface piercement and exposure. Using subgrain size piezometry, the maximum differential stresses for the subsurface salt is 1.7 MPa and those for the surface-piercing salt is 3.4 MPa, the latter value displaying the high stress conditions in the diapir ‘stem’ as the salt rises on its way to the surface.     

Geochemical characterization of arsenic-affected alluvial aquifers of the Bengal Delta (West Bengal and Bangladesh) and Chianan Plains (SW Taiwan): Implications for human health

Major ion and trace element analyses were performed on groundwater samples collected from the Bengal Delta (Chakdaha municipality, West Bengal and Manikgonj town, Bangladesh) and Chianan Plains (SW Taiwan) to compare geochemical characteristics. Results showed that concentrations of Na, K, Mg, Cl and SO₄ were generally higher in Chianan Plain (CNP) groundwaters, while high Ca was observed in Bengal Delta Plain (BDP) groundwater. Measured As concentrations in groundwaters of BDP and CNP showed large variations, with mean As concentrations of 221 μg/L (range: 1.1-476 μg/L) in Chakdaha, 60 μg/L (range: 0.30-202 μg/L) in Manikgonj, and 208 μg/L (range: 1.3-575 μg/L) in CNP groundwater. The Fe-reduction mechanism was found to be the dominant geochemical process in releasing As from sediment to groundwater in Chakdaha, West Bengal, however the Mn-reduction process was dominant in groundwaters of Manikgonj, Bangladesh. In Chianan Plain groundwater, a combination of geochemical processes (e.g., bacterial Fe-reduction, mineral precipitation and dissolution reactions) controlled release of As. Fluorescence spectral patterns of the groundwater showed low relative fluorescence intensity (RFI) of dissolved humic substances in BDP groundwater (mean: 63 and 72 QSU, Chakdaha and Manikgonj, respectively), while high RFI was observed in CNP groundwater (mean: 393 QSU). The FT-IR spectra of the extracted humic acid fractions from sediments of Chianan Plain showed a stronger aliphatic band at 2850-3000 cm⁻¹ and a higher resolved fingerprint area (from 1700 to 900 cm⁻¹) compared with BDP sediments. The geochemical differences between the study areas may play a crucial role in the clinical manifestation of Blackfoot disease observed only in Chianan Plain, SW Taiwan.     

Bifurcations of ion acoustic solitary waves and periodic waves in an unmagnetized plasma with kappa distributed multi-temperature electrons

Ion acoustic solitary waves and periodic waves in an unmagnetized plasma with superthermal (kappa distributed) cool and hot electrons have been investigated using non-perturbative approach. We have transformed basic model equations to an ordinary differential equation involving electrostatic potential. Then we have applied the bifurcation theory of planar dynamical systems to the obtained equation and we have proved the existence of solitary wave solutions and periodic wave solutions. We have derived two exact solutions of solitary and periodic waves depending on the parameters. From the solitary wave solution and periodic wave solution, we have shown the effects of density ratio p of cool electrons and ions, spectral index κ, and temperature ratio σ of cool electrons and hot electrons on characteristics of ion acoustic solitary and periodic waves.