基于Windows Mobile与蓝牙GPS的辅助定位系统研究

本文在分析导航型GPS输出数据格式的基础上,研究了智能手机与GPS之间的蓝牙数据链以及GPS坐标系到测量坐标系的转换方法,并在此基础上进行了基于Windows Mobile的应用程序开发。实践证明,采用这种方法定位精度可以达到6～7米,能应用于测量控制点的辅助定位及其他非高精度定位的专业领域。     

顾及DEM误差自相关的坡度计算模型精度分析

基于DEM的坡度计算,其误差来源于DEM误差、DEM结构和坡度计算模型。在顾及DEM误差自相关的前提下,对四种DEM坡度计算模型进行了分析和评价。研究表明,三阶不带权差分能给出较高的坡度计算精度;在局部窗口中,格网点数量越多,坡度计算越准确;等权比不等权的坡度计算模型更准确;DEM误差自相关结构形式对坡度计算无影响。进一步的理论分析和试验分析还表明：DEM误差自相关性的存在,不仅能够改善地形分析的精度,也能改善DEM自身精度。     

Characteristics of afferent activity of ampullary electroreceptors in catfish Parasilurus asotus

The spontaneous and evoked activity of electroreceptors were electrophysiologically studied. The results are:

Increasing critical sensitivity of the Load/Unload Response Ratio before large earthquakes with identified stress accumulation pattern

The Load/Unload Response Ratio (LURR) method is proposed for short-to-intermediate-term earthquake prediction [Yin, X.C., Chen, X.Z., Song, Z.P., Yin, C., 1995. A New Approach to Earthquake Prediction — The Load/Unload Response Ratio (LURR) Theory, Pure Appl. Geophys., 145, 701–715]. This method is based on measuring the ratio between Benioff strains released during the time periods of loading and unloading, corresponding to the Coulomb Failure Stress change induced by Earth tides on optimally oriented faults. According to the method, the LURR time series usually climb to an anomalously high peak prior to occurrence of a large earthquake. Previous studies have indicated that the size of critical seismogenic region selected for LURR measurements has great influence on the evaluation of LURR. In this study, we replace the circular region usually adopted in LURR practice with an area within which the tectonic stress change would mostly affect the Coulomb stress on a potential seismogenic fault of a future event. The Coulomb stress change before a hypothetical earthquake is calculated based on a simple back-slip dislocation model of the event. This new algorithm, by combining the LURR method with our choice of identified area with increased Coulomb stress, is devised to improve the sensitivity of LURR to measure criticality of stress accumulation before a large earthquake. Retrospective tests of this algorithm on four large earthquakes occurred in California over the last two decades show remarkable enhancement of the LURR precursory anomalies. For some strong events of lesser magnitudes occurred in the same neighborhoods and during the same time periods, significant anomalies are found if circular areas are used, and are not found if increased Coulomb stress areas are used for LURR data selection. The unique feature of this algorithm may provide stronger constraints on forecasts of the size and location of future large events.     

Comparison of methods to model the gravitational gradients from topographic data bases

A number of methods have been developed over the last few decades to model the gravitational gradients using digital elevation data. All methods are based on second-order derivatives of the Newtonian mass integral for the gravitational potential. Foremost are algorithms that divide the topographic masses into prisms or more general polyhedra and sum the corresponding gradient contributions. Other methods are designed for computational speed and make use of the fast Fourier transform (FFT), require a regular rectangular grid of data, and yield gradients on the entire grid, but only at constant altitude. We add to these the ordinary numerical integration (in horizontal coordinates) of the gradient integrals. In total we compare two prism, two FFT and two ordinary numerical integration methods using 1" elevation data in two topographic regimes (rough and moderate terrain). Prism methods depend on the type of finite elements that are generated with the elevation data; in particular, alternative triangulations can yield significant differences in the gradients (up to tens of Eötvös). The FFT methods depend on a series development of the topographic heights, requiring terms up to 14th order in rough terrain; and, one popular method has significant bias errors (e.g. 13 Eötvös in the vertical–vertical gradient) embedded in its practical realization. The straightforward numerical integrations, whether on a rectangular or triangulated grid, yield sub-Eötvös differences in the gradients when compared to the other methods (except near the edges of the integration area) and they are as efficient computationally as the finite element methods.     

Energy transfer among Pb, Ce and Mn in fluorescent calcite from Kuerle, Xinjiang, China

Natural calcite from Kuerle, Xinjiang, China, shows orange-red fluorescence when exposed to short-wave ultraviolet (UV) light (Hg 253.7 nm). Photoluminescence (PL) emission and excitation spectra of the calcite are observed at room temperature in detail. The PL emission spectrum under 208 nm excitation consists of three bands: two UV bands at 325 and 355 nm and an orange-red band at 620 nm. The three bands are ascribed to Pb²⁺, Ce³⁺ and Mn²⁺, respectively, as activators. The Pb²⁺ excitation band is observed at 243 nm, and the Ce³⁺ excitation band at 295 nm. The Pb²⁺ excitation band is also observed by monitoring the Ce³⁺ fluorescence, and the Pb²⁺ and Ce³⁺ excitation bands, in addition to six Mn²⁺ excitation bands, are also observed by monitoring the Mn²⁺ fluorescence. These indicate that four types of the energy transfer can occur in calcite through the following processes: (1) Pb²⁺ → Ce³⁺, (2) Pb²⁺ → Mn²⁺, (3) Ce³⁺ → Mn²⁺ and (4) Pb²⁺ → Ce³⁺ → Mn²⁺.     

REE characteristics of the Fanshan alunite deposit in Zhejiang Province, China

1 Introduction Alunite [KAl3(SO4)2(OH)6] is a very important non-ferrous metal resource, so many countries throughout the world have made great investments in research on the mechanism of its formation, its geological characteristics and applications. O…     

中国岩溶洞穴数据库建设研究

为了有效地保护和利用洞穴这一具有多方面价值的、不可再生的国土资源而建立了中 国岩溶洞穴数据库,首期完成900个洞穴数据建库工作。数据库中含有图、文、声、 像等方面的数字化信息,数据容量2500MB,作为非商业数据,可通过授权共享,为 科研机构、旅游行业和公众提供服务。     

Practical Research of IKONOS-2 Geopositioning and Its Accuracy in Tibet of China

This paper presents the studies of the refining of IKONOS-2 RPC, the transform of the datum, the mode of the control point distribution and the method of IKONOS stereo triangulation, so that IKONOS imagery can be used to collect the precise geospatial data and produce the large scale map. The transform between the IKONOS-2 image space and the national coordinate system based on the RPC have been developed, and the results of block adjustment with various control schemes in a practical project near Himalayas have been examined and analysed. The encouraging results of high positioning accuracy have been obtained.     

岩石复电阻率Dias模型及其参数求取方法

Dias模型是众多描述岩石复电阻率的频散特性模型中的一种,它不但参数少,且可由这些参数导出具有特定物理意义的参数。针对Dias模型参数的求取及反演解的不确定性评价,这里提出了一种模拟退火阻尼最小二乘联合反演方法。该方法首先将参数求解空间离散化,利用模拟退火找到全局最优解区间,然后利用阻尼最小二乘法在解空间进行求解。该方法有效地克服了原来两种方法的反演速度慢、反演结果依赖于初值的缺点,并实现了对反演结果多解性的评价。研究结果表明,对于岩石复电阻率数据的处理解释,Dias模型的使用比传统的Cole模型及其变形更具有潜在的优势。