β-环糊精包合态三氟氯氰杀虫剂的制备

为了进一步提高三氟氯氰菊酯农药的防治效果。寻找适宜的农药新剂型，我们用液相法制备了三氟氯氰菊酯－β－环糊精包合物，并以水为基质进行了稳定性观察，同时又以差热分析法和气相色谱法确认了包合物的形成，以旋光度法证明两者间的包合比。结果表明，三氟氯氰菊酯与β-环糊精可形成1：1型包合物，该包合物稳定性高，具有一定的水溶性，而且在水中稳定，所以有望通过环糊 包合作用将三氟氯氰菊酯帛成水剂；当以气相法测试包合态三氟氯氰菊酯含量时，必须将其解络，使之成为游离状态，然后按常规方法进行含量测定。     

ENSO循环过程对南极海冰的影响

应用 1 951- 2 0 0 2年NINO特征指数 (NINO1 +2 ,NINO3 ,NINO4 ,NINO3 .4)和 1 973-1 998年南极海冰北界范围以及 1 950- 2 0 0 1年SODA海洋温度资料。首先分析探讨了在ElNi no期间 ,堆积于赤道东太平洋的异常暖水在南半球的传播途径 ,进而研究了ENSO以及东南太平洋异常海温场与南极海冰之间的关系。结果表明 ,在ElNino期间 ,堆积于赤道东太平洋的异常暖水 ,是沿秘鲁和智利沿岸向极传播。其传播过程持续大约 1年的时间 ,但未发现沿南赤道流的西传现象。ENSO循环过程与南极海冰变化存在一定联系 ,特别是Amundsen Belling shausen海和南极半岛海冰的变化与ENSO暖事件 (ElNino)较为密切。当ElNino事件发生后 ,时滞 2年左右的时间 ,Amundsen Bellingshausen海和南极半岛的海冰将出现明显的减少现象 ,特别是南极半岛的海冰减少最为明显。ElNino事件对南极海冰的影响过程是 ,堆积于赤道东太平洋的大量异常暖水 ,沿南美 (秘鲁和智利 )沿岸近海向极地传播 ,异常暖水的这种向极传播过程将引起近极的海温场出现异常升高 ,最终导致Amundsen Bellingshausen海和南极半岛地区的海冰减少。自 2 0世纪 80年代以来 ,Amundsen Bellingshausen海和南极半岛的海冰出现明显减少的趋势 ,与这一时期的ElNino事件的频繁发生     

松辽盆地后五家户气田沉积相特征与控气作用

本文对松辽盆地东南部后五家户气田划分出22种沉积微相,建立7种相层序,分析了扇三角洲及三角洲沉积环境对天然气成藏的控制作用。指出了扇三角洲前缘砂体和三角洲前缘砂体较为发育,沉积物源来自气田东北部和东南部两个方向。后五家户气田多为构造—岩性气藏和岩性气藏。     

罕见矿物--六方球方解石的发现及特征

大庆油田部分三元复合驱抽油井结垢现象比较严重。井中结垢损害抽油设备，增加了生产成本。通过运用XRD，IR，SEM和化学分析手段对抽油井垢的研究发现，垢的主要化学成分为CaO和SiO2，其含量分别为67％和28％，油井垢中的主要矿物成分是罕见矿物——六方球方解石。六方球方解石呈微晶状(1—10μm)，并常常以微晶聚集的球粒状出现，同时伴生有无定形SiO2。呈游离态的SiO2和有机质对于六方球方解石的形成起到了重要作用。     

层序成因动力学中的构造因素研究

本文以层序－盆地－构造为主线，对层序成因动力学中的构造控制进行了研究。结果表明，层序发育的构造控制主要表现为：1）构造控制盆地边界，进而控制层序充填轮廓；2）构造级次控制层序和层序级别；3)构造属性控制盆地性质，进而控制层序成因格架和界面成因类型；4)随着层序规模和界面级别的增大，构造控制的意义和痕迹越明显；5)同沉积断裂活动控制层序的内部构型；6)构造基底活动形式控制着层序容纳空间和结构型式；7)构造演化控制着盆地演化及性质，进而控制着层序充填样式和组合类型。     

义敦成矿带铜银铅锌锡矿产资源调查评价进展与潜力

义敦成矿带地处独特的大地构造部位，经历了复杂的地质构造演化和强烈的岩浆活动，成矿条件优越，矿产资源丰富。1999年实施国土资源地质大调查以来，相继发现了普朗、松诺、卓玛斑岩铜矿；砂西、热朗泽、夏隆等银铅锌矿；热隆、脚根玛锡矿；打马池觉铜金矿等一批具有重要找矿前景的矿床(点)。该地区矿产资源勘查工作程度低，蕴藏着较大的找矿潜力，有望成为国家级重要的有色及贵金属矿产勘查和开发基地。     

可可西里——东昆仑活动构造带强震活动研究

青海昆仑山口西 8.1级地震发生在具有新生性特征的可可西里—东昆仑活动断裂带上。该断裂带在 190 0年以来的 10 0多年中经历了一个强震活动过程。在该强震活动过程中 ,地震沿整个可可西里—东昆仑活动构造带分段破裂 ,强震的破裂长度和震级之间大致满足对数线性的统计关系 ,强震活动呈现指数型时间分布的加速特征。这种强震加速活动特征可以用含多个震源体的孕震系统的强震成组活动模型给予解释。     

Discussion on the feature of strong earthquake: Orderly distribution in time, space and intensity before the Western Kunlun Mountain Pass M=8.1 earthquake

Introduction The Western Kunlun Mountain Pass M=8.1 earthquake occurred on November 14, 2001 is the other M=8 earthquake occurred 50 years after Dangxiong, Tibet M=8.0 earthquake in Chinese mainland. The earthquake has caused the attention of the seismologists in the following aspects: 1) The fracture length is more than 400 km, which is far away from the estimated length by the statistic empirical function between the magnitude and the fracture length (WANG, et al, 2002); 2) The aftersh…     

Application of extended distinct element method with lattice model to collapse analysis of RC bridges

This paper proposes a simple lattice model for collapse analysis of RC bridges subjected to earthquakes by using the extended distinct element method (EDEM). In the model, a concrete element consists of lumped masses connected to one another by springs, and a reinforcement bar is represented by a discrete model or an integrated model. The proposed lattice model is simple but its parameters are reasonably defined. It has fewer element nodes and connecting springs, which will be of benefit by shortening the CPU time. The processes to determine the initial stiffness of concrete and steel springs, the parameters of the constitutive model and the fracture criteria for springs are described. A re‐contact spring model is also proposed to simulate the re‐contact of the concrete after fracture of springs; and a general grid searching method is used to decrease the CPU time for judging re‐contact after fracture. The lattice model is assessed by numerical simulations and experiments. As an application, a damaged single‐column pier subjected to the Kobe Earthquake in 1995 is analysed by EDEM with the proposed model. The simulation results indicate that the proposed model predicts well qualitatively the collapse process of RC bridges. Copyright © 2003 John Wiley & Sons, Ltd.     

CDP mapping in tilted transversely isotropic (TTI) media. Part I: Method and effectiveness

Transverse isotropy with a tilted axis of symmetry (TTI) causes image distortion if isotropic models are assumed during data processing. A simple anisotropic migration approach needs long computational times and is sensitive to the signal-to-noise ratio. This paper presents an efficient, general approach to common-depth-point (CDP) mapping to image the subsurface in TTI media from qP-wave seismic data by adding anisotropic and dip parameters to the velocity model. The method consists of three steps: (i) calculating traveltimes and positions of the CDP points; (ii) determining CDP trajectories; (iii) CDP imaging. A crucial step is the rapid computation of traveltimes and raypaths in the TTI media, which is achieved by the Fermat method, specially adapted for anisotropic layered media. The algorithm can image the subsurface of a given model quickly and accurately, and is suitable for application to a bending reflector. The effectiveness of the method is demonstrated by comparing the raypaths, the traveltimes and the results of CDP mapping, when assuming isotropic media, transversely isotropic media with a vertical axis of symmetry (TIV), and TTI media.