一种组合优化的多边形化简方法

以多边形轮廓为目标 ,依据曲线特征点将其分解为一系列的弯曲特征 ,并对此弯曲特征集实施组合优化 ,将入围弯曲首尾相连 ,即可得到最终的化简结果     

Soil respiration in tropical seasonal rain forest in Xishuangbanna, SW China

With the static opaque chamber and gas chromatography technique, from January 2003 to January 2004 soil respiration was investigated in a tropical seasonal rain forest in Xishuangbanna, SW China. In this study three treatments were applied, each with three replicates: A (bare soil), B (soil+litter), and C (soil+litter+seedling). The results showed that soil respiration varied seasonally, low from December 2003 to February 2004, and high from June to July 2004. The annual average values of CO2 efflux from soil respiration differed among the treatments at 1% level, with the rank of C (14642 mgCO2· m-2. h-1)＞B (12807 mgCO2· m-2. h-1)＞A (9532 mgCO2· m-2. h-1). Diurnal variation in soil respiration was not apparent due to little diurnal temperate change in Xishuangbanna. There was a parabola relationship between soil respiration and soil moisture at 1% level. Soil respiration rates were higher when soil moisture ranged from 35% to 45%. There was an exponential relationship between soil respiration and soil temperature (at a depth of 5cm in mineral soil) at 1% level. The calculated Q1o values in this study,ranging from 2.03 to 2.36, were very near to those of tropical soil reported. The CO2 efflux in 2003was 5.34 kgCO2· m-2. a-1 from soil plus litter plus seedling, of them 3.48 kgCO2· m-2. a-1 from soil (accounting for 62.5%), 1.19 kgCO2· m-2. a-1 from litter (22.3%) and 0.67 kgCO2·m-2. a-1 from seedling (12.5%).     

塔中Ⅰ号坡折带上奥陶统礁滩的白云石化及其储集意义

塔里木盆地塔中Ⅰ号坡折带上奥陶统良里塔格组礁滩灰岩发生了少量白云石化作用。白云石化主要发育在溶洞充填的钙质渗流粉砂,泥晶生物碎屑灰岩的泥晶基质,亮晶颗粒灰岩的钙藻屑、藻砂屑、藻泥屑等三种组构中。白云石化直接贡献了平均1%的孔隙度,同时产生的白云石晶间孔为进一步溶蚀提供了通道,对有效储层的形成起到了重要作用。高镁方解石生物是白云石化所需镁离子的重要来源。这套与生物白云石化相关的礁滩储层地质预测需要深入研究钙藻、海百合等生物的古生态、岩相环境及分布。     

长江口斜压诊断模式三维流场数值模拟

建立了σ坐标系下长江口斜压诊断模式三维流场数学模型,采用k-kl二方程紊流闭合模型求解垂向涡粘系数,计算域内恒定、非均匀盐度场反映了计算域密度斜压效应。验证结果表明,斜压诊断模式的模拟成果较切合实际。模型成功复演了长江口水域由往复流向旋转流过渡的流场特性;潮波从四条汊道传入后在分汊口附近相遇形成多个会潮点,其位置随着径流的大小、潮汐的强弱、汊道的形态等因素而变化。     

青藏高原地球动力学初探

青藏高原是当今世界上最高、最大和最年轻的高原。青藏高原的地球动力学研究是一个复杂而饶有兴趣的问题。本文试图从高原的范围、地球物理特征、地震活动、构造演化和新构造运动等方面探讨其地球动力学过程。 从新构造分析,笔者着重指出,青藏高原是欧亚大陆板块中最活动的一个块体,它在造就中国乃至东亚新构造运动的格局方面,是一个十分重要的因素。     

长春黄土状土的水文、工程地质特性及降水方案的确定

在镜下对长春黄土状土的微观结构进行研究，发现第三层粉质粘土含水机制在于土中具有纵横交织的空洞和管道，地下水赋存于其中；第二层棕红色粉质粘土和粘土的崩解性在于该层土具有网状裂隙，卸荷后遇水崩解，在此基础上提出基坑降水的设计方案。     

一种尚未定名的Ni—As—S—Se矿物相

Ｎｉ－Ａｓ－Ｓ－Ｓｅ矿物相首次发现于西秦岭南亚带拉尔玛－邛莫金－铜－铀建造矿床中。与其共生的矿物有：硒汞矿、硒铅矿、硒梯矿、硒硫锑矿、硒硫锑铜矿、自然金、重晶石、石英等。该矿物颗粒细小，粒度小于１０μｍ。在反光显微镜下呈白色，无内反射现象，为一均质矿物。两个点的电子探针分析结果（ＷＢ％）：Ｎｉ２４．１２３￣２９．３７８，Ａｓ２７．５７４￣３３．８９５，Ｈｇ７．５９１￣５．３５９，Ｓ１３．９３９￣１     

我国热带亚热带部分地区花岗岩和片麻岩中黑云母风化研究

综合应用Ｘ射线衍射、扫描电镜、透射电镜及偏光显微镜等技术手段研究了我国热带、亚热带部分地区花岗岩和片麻岩中黑云母的风化现象。结果表明，化学风化产物主要有黑云母／蛭石不规则间层矿物、水黑云母、蛭石、０．７ｎｍ埃洛石及铁的氢氧化物（氧化物）等。影响黑云母风化及次生产物形成的主要因素包括黑云母的晶体结构和化学成分、气候、风化壳母岩的矿物成分等。     

Comparison of manual and automatic methods for measurement of methane emission from rice paddy fields

The methane emission flux from rice paddies was simultaneously measured with automatic and manual methods in the suburban of Suzhou. Both methods were based on the static chamber/ GC-FID techniques. Detail analysis of the experimental results indicates: a) The data of methane emission measured with the automatic method is reliable. b) About 11 or 19 o’clock of local time is recommended as the optimum sampling time for the manual spot measurement of methane emission from rice paddies. The methane emission fluxes measured by manual sampling at local time other than the optimum time have to be corrected. The correction coefficient may be determined by automatic and continuous measurement. c) In order to get a more accurate result, an empirical correction factor, such as 18%, is recommended to correct the seasonally total amount of measured methane emission by enlarging the au-tomatically measured data or reducing the manually measured ones.     

风廓线雷达估算大气返回信号功率方法研究

基于风廓线雷达大气返回信号功率谱中噪声电平的估算方法,统计分析了北京延庆对流层风廓线雷达（CFL-08）2006年10～12月的探测数据。对该频段风廓线雷达环境噪声的空间和时间变化进行了分析,观测期间环境噪声在5km以下随高度递减,10月的平均环境噪声大于11月、12月的平均分布。给出目前风廓线雷达用信噪比估算大气返回信号功率的两种方法,并对两种方法进行了环境噪声的剔除,经过修正后的大气返回信号功率输出结果趋于一致。