Wave-Current Forces on Vertical Cylinders in Side-by-Side Arrangement for Irregular Waves Combined With Opposing Current

- The wave-current forces on vertical piles in side-by-side arrangement induced by irregular waves with opposing current are investigated experimentally in this paper. The characteristics in both time and frequency domain of in-line, lift and resultant forces are analyzed. The grouping effect coefficients of inline, lift and resultant forces on piles related to KC number and relative spacing parameters are given. These results are compared with those in the case of irregular waves combined with following currents. It is found that the results in these two cases are quite different. The range of KC number tested is 10- 60, the range of Reynolds number is (0.55-3.43) ×104.     

Test Study on Current Force on Mooring Ships

In respect of an offshore berthing pillar, the test study result of current force acting on mooring ships is described in this paper. Empirical and semi-empirical relationships of current force coefficient are given according to the angle between the flow direction and the ship's longitudinal axis, which are coincident with the result of theoretical analysis.     

沿海地区城市发展及地面沉降的系统控制

本文运用系统工程原理,系统论述了地下水合理开发、管理和地面沉降系统控制,这对沿海地区地面沉降控制起到重要的作用。     

A Computational Model for Velocity Separation in Shallow Sea

Based on the hydrodynamical feature and the theoretical velocity profiles of tidal flow and vvind-induced flow in shal-low sea, a computational model is established for the first time, which can separate observed velocity into tidal velocity and wind-induced velocity by use of the least square method. With the model, not only the surface velocities of tidal flow and vvind-induced flow are obtained, but also the bed roughness height is determined and the wind velocity above the wa-ter surface is estimated. For verification of the model, the observed velocity in the Yellow River Estuary and the laborato-ry test is separated, then it is applied to the Yangtze River Estuary. All the results are satisfactory. The research results show that the model is simple in method, feasible in process and reasonable in result. The model is a valid approach to analysis and computation of field dala, and can be applied to separate the observed velocity in shallow sea; at the same time, reasonable boundary conditions of th     

Vertical variations of wave-induced radiation stress tensor

INTRODUcrIONThe concept of radiation stress was deve1oPed by tonguet--Higgins and Stewart (1964 ),who intreduced the definition of radiation stress as the excess mornentum due to the presence ofwaves, on the basis of time-averaged laws of Newtonian fluid mechanics and the assmption ofa unifOrm velocity distribution over depth. Subequently, the theory has been applied success-fully in the investigation of phenomena such as wave set-up and set--down (Bowen et al.,l968), longshore currents …     

Wave Loads and Protective Techniques of An On-Shore Wave Power Device

In this paper, the extreme wave loads on an on-shore wave power device are investigated. First, boundary element method is applied to solve the three dimensional potential problem based on the small amplitude wave assumption. Then the motion of the Oscillating Water Column (OWC) inside the device and its laods on the device are calculated in time domain. Several protective techniques often applied are simulated by changing the constraint of the upper end of the chamber of the device. Numerical results are used to judge the effectiveness of these techniques. The investigation shows that damping can not effectively restrain the motion of OWC when the period of incident wave is long, which may cause dangerous loads on the structure. The shut chamber can effectively restrain the motion of OWC, but alternatively cause high pressure in the chamber. A Contracting opening with a Taper (CT) can exhaust a great amount of kinetic energy of OWC, and significantly decrease the loads. It is a promising protective tec     

Numerical Analysis of Wave Forces on Arbitrarily Shaped Multi-Pillars Over Varying Topography

The modified hybrid element method (MHEM) is utilized to predict and analyze wave forces on arbitrarily shaped multiple bodies. This method can be applied to waves of all water depths, i. e. shallow, intermediate, and deep waters, on slowly varying seabed. The MHEM employs the ICCG method to save CPU and storage, thus the computation of wave forces for large multi-body systems can be carried out on microcomputers. Numerical results of the present method are compared with experimental data and other solutions. It is shown that the MHEM provides more accurate solutions of the wave forces than other numerical methods do. Therefore, the methodology presented herein can be used in the design of coastal and ocean structures.     

Research on the spectral analysis and test method of period signals in monthly mean sea level

Ｒｅｓｅａｒｃｈｏｎｔｈｅｓｐｅｃｔｒａｌａｎａｌｙｓｉｓａｎｄｔｅｓｔｍｅｔｈｏｄｏｆｐｅｒｉｏｄｓｉｇｎａｌｓｉｎｍｏｎｔｈｌｙｍｅａｎｓｅａｌｅｖｅｌ￥ＭａＪｉｒｕｉ；ＴｉａｎＳｕｚｈｅｎ；ＺｈｅｎｇＷｅｎｚｈｅｎａｎｄＣｈａｉＸｉｎｍｉｎ（Ｒ...     

Wave-Current Forces on Small Square Cylinders (Part I)

-Based on the extended Morison Equation and model tests, the in-line forces on small square cylinders caused by waves (regular and irregular) and currents are analyzed in detail in this paper. The hydrodynamic coefficient CD and Cu related to KC number and the effect of direction of wave incidence are also given, which can be used in engineering practice.     

中华半管藻繁殖生物学研究──Ⅱ.营养细胞和休眼孢子的形态结构

通过扫描电镜观察中华半管藻的营养细胞和休眠孢子的形态结构显示：营养细胞上下壳各具一个线性裂口而不外突的唇形突,壳壁上的眠纹放射状,爪状连接刺上有零散的单孔,从单孔分泌胶质与相邻细胞连接;休眠孢子双凸透镜形或近球形,壳厚,表面平滑无纹饰,上壳面边缘具8～16根分叉长刺,下壳面具微刺,外围有一裙状物,其上有微孔。两类细胞不同的形态特征反映其不同的生态适应。