C#与Matlab混合编程技术在数字地震信号处理软件中的应用

Matlab软件具有功能强大的数值计算和数字信号处理功能.C序开发语言.Matlab Builder NE可以将MTALAB函数打包,供所有支持公共语言规范的.NET语言调用.为了充分利用两种语言各自的优势,结合数字信号功率谱分析实例,提出了基于.NET组件的Matlab和C#混合编程方法.该方法能够轻松实现C#环境下...     

Estimated Green’s function extracted from superconducting gravimeters and seismometers

Estimated Green’s function (EGF) between stations has been extracted from ambient seismic noise, direct surface wave and coda waves. It is also confirmed by laboratory experiments on ultrasonics and theoretical derivations assuming diffusive wave field, equi-partition of modes or random sources on an enclosed surface. This method provides a new approach to study the crust and mantle structure at regional scale, continental scale and global scale. Following the achievements with seismometer records, the reco...     

Optical signatures of dissolved organic matter in the watershed of a globally large river (Yangtze River,China)

Parallel factor analysis of fluorescence excitation emission matrices of surface water samples of a globally large river (Yangtze River, China) watershed identified three classes of fluorescent dissolved organic matter (FDOM) that had ex/em = 280/330 nm, 305/385 nm and 350/450 nm respectively, resembling “peak T”, “peak M” and “peak C” commonly identified in natural water, respectively. Peak T (a tyrosine/tryptophan-like FDOM) did not show correlations to peak M or C which were humic-like substances, while a positive correlation (r = 0.935, p < 0.001) was present between the natural log-transformed maximum fluorescence intensity (F_max) of peaks T and M indicating a tight link during their production and processing. F_max values (in Raman unit nm^?1) normalized to dissolved organic carbon (DOC) concentration were low, varying in ranges 15.93–85.95, 29.83–83.54 and 19.73–51.05 × 10^?5 nm^?1 (μmol/L)^?1 for peaks T, M and C, respectively, in line with the history of strong photobleaching of the water samples as indicated by fairly high absorption spectral slope ratios (0.75–1.53 with a mean 1.03). Intermediate fluorescence index (FI) (1.46–1.83 with a mean 1.61) and small specific absorption at 254 nm (0.64–1.93 with a mean 1.15 m^?1 mg^?1 L) of the water samples, indicated the presence of both aquatic microbial DOM (e.g. peak T) and soil DOM (e.g. peak C). Peak C could be substantially removed by UV-A (320–400 nm) irradiation, while peak M was slightly increased when a microbe-containing water was exposed to the same UV-A irradiation. Taken together, peak C was attributed to diffuse soil source while peak M was likely attributed to joint effects of microbial activities and solar irradiation on the chromophores in the sample.     

Plant Species Richness Increased Belowground Plant Biomass and Substrate Nitrogen Removal in a Constructed Wetland

The effects of plant species richness on both above‐ and belowground plant biomass, plant nitrogen (N) pool size, and substrate N concentrations were studied in a full‐scale subsurface vertical‐flow constructed wetland (CW). Results showed that (i) plant species richness increased belowground plant biomass and its N pool size but had no effect on aboveground plant biomass and its N pool size; (ii) plant species richness increased substrate N removal, especially ammonium N removal; and (iii) plant species richness had no effect on plant N use efficiency, suggesting that the N pool size increased with increasing plant species richness. More N accumulation could be removed through harvesting plant biomass. We concluded that the N removal performance of the CW improved by plant species richness through increasing belowground biomass and relevant N pool size.     

Epistemological dimensions of the water–energy–food nexus approach: reply to discussions of “Challenges in operationalizing the water–energy–food nexus”*

ABSTRACT

We thank the authors, Varis and Keskinen, and Nauditt, for their constructive contributions. We endorse their key comments, further referring to recent literature and events, including the UN 2018 High Level Political Forum on sustainable development. Here, we elaborate on the epistemological perspective of the water–energy–food nexus conceptualization, assessment, discourse and operationalization.     

The characteristics of shear wave splitting in the source region of the April 20, 2013 Lushan earthquake

Using seismic data of the aftershocks sequence of the April 20, 2013 Lushan earthquake recorded by seismic temporary and permanent stations in the source region, with the visual inspection of particle motion diagrams, this paper preliminarily contains the polarization directions of fast shear wave and the time-delays of split shear waves at every station, and analyzes the crustal anisotropic characteristics in the source region. In the study area, the polarization direc- tions at stations BAX, TQU, L 132, L 133, L 134, and L 135 are northeast, which is consistent with the strike of Dachuan- Shuangshi fault. There are two polarization directions at MDS and L131, which are northeast and southeast. The scatter of polarization directions suggests the complex stress field around these two stations where two faults intersect. For the normalized time-delays at every station, the range is 1.02-8.64 ms/km. The largest time-delay is from L134 which is closest to the mainshock, and the smallest one is from L133. The variations in time-delays show the decreasing at stations BAX, L134, and L135 because of the stress-relaxation after earthquake.     

Amplification of SH waves by an orthotropic basin

Scattering of elastic waves by an orthotropic sedimentary basin is investigated for antiplane strain model using an indirect boundary integral equation approach. Both steady state and transient response were obtained for semicircular and semielliptical basins with different material properties. The results indicate that the basin geometry and the impedance contrast between the half-space and the basin have similar effects on the surface ground motion amplification as for the isotropic case. However, the material anisotropy may change significantly the fundamental resonant frequencies of the basin, resulting in different surface displacement amplification patterns. In addition, it was observed that the arrival time of the main disturbance on the surface strongly depends on material anisotropy for different angles of incidence. The results demonstrate that material anisotropy may be very important in explaining surface ground motion amplification for sedimentary basins. © 1998 John Wiley & Sons, Ltd.     

Effect of thermal stimulation on gas production from hydrate deposits in Shenhu area of the South China Sea

The Shenhu area on the northern continental slope of the South China Sea (SCS) is one of the promising fields for gas hydrate exploitation. The hydrate-bearing layer at drilling site SH2 is overlain and underlain by permeable zones of mobile water. In this study a vertical well was configured with a perforated Interval I for producing gas and a coiled Interval II for heating sediment. The hydrate is dissociated by a small depressurization at Interval I and a thermal stimulation at Interval II. The numerical simulations indicate that the thermal stimulation has a significant effect on gas release from the hydrates in the production duration and improves the gas production in the late period. The gas released by thermal stimulation cannot be produced as quickly as the production gets operated because of the hard pathway for fluids to flow in the sediments. The gas production is enhanced due to the heating for 7242 m 3 in the whole production. Increasing heating temperature at Interval II can improve gas production and restrain water output, and advance the arrival time of the gas flow from the zone at Interval II. The absolute criterion and relative criterion suggest that the thermal stimulation in the production schemes is pronounced for releasing gas from the hydrate deposit, but the production efficiency of gas is limited by the sediment of low permeability. The study provides an insight into the production potential of the hydrate accumulations by thermal stimulation with depressurization in two wells, and a basis for analyzing economic feasibility of gas production from the area.     

Did the M S7.0 Lushan earthquake dynamically trigger earthquakes in the Datong volcanic region (Shanxi Province)?

Immediately following the M _S7.0 Lushan earthquake on April 20, 2013, using high-pass and low-pass filtering on the digital seismic stations in the Shanxi Province, located about 870–1,452 km from the earthquake epicenter, we detected some earthquakes at a time corresponding to the first arrival of surface waves in high-pass filtering waveform. The earthquakes were especially noticed at stations in Youyu (YUY), Shanzizao (SZZ), Shanghuangzhuang (SHZ), and Zhenchuan (ZCH), which are located in a volcanic region in the Shanxi Province,but they were not listed in the Shanxi seismic observation report. These earthquakes occurred 4–50 min after the passage of the maximum amplitude Rayleigh wave, and the periods of the surface waves were mainly between 15 and 20 s following. The Coulomb stresses caused by the Rayleigh waves that acted on the four stations was about 0.001 MPa, which is a little lower than the threshold value of dynamic triggering, therefore, we may conclude that the Datong volcanic region is more sensitive to the Coulomb stress change. To verify, if the similar phenomena are widespread, we used the same filtering to observe contrastively continuous waveform data before, and 5 h after, the M _S7.0 Lushan earthquake and M _S9.0 Tohoku earthquake in 2011. The results show that the similar phenomena occur before the earthquakes, but the seismicity rates after the earthquakes are remarkably increased. Since these weak earthquakes are quite small, it is hard to get clear phase arrival time from three or more stations to locate them. In addition, the travel time differences between P waves and S waves (S–P) are all less than 4 s, that means the events should occur in 34 km around the stations in the volcanic region. The stress of initial dynamic triggering of the M _S9.0 Tohoku earthquake was about 0.09 MPa, which is much higher than the threshold value of dynamic triggering stress. The earthquakes after the M _S9.0 Tohoku earthquake are related to dynamic triggering stress, but the events before the earthquake cannot be linked to seismic events, but may be related to the background seismicity or from other kinds of local sources, such as anthropogenic sources (i.e., explosions). Using two teleseismic filtering, the small background earthquakes in the Datong volcanic region occur frequently, thus we postulate that previous catalog does not apply bandpass filter to pick out the weak earthquakes, and some of the observed weak events were not triggered by changes in the dynamic stress field.     

2013 年3 月27 日台湾南投MW 6. 0 地震震源机制解与发震构造研究

采用基于近远震波形的CAPjoint 方法,对2013 年3 月27 日台湾南投MW6. 0 地震分别进行了单独反演和联合反演,获得了各自的震源机制解及震源深度。其中,联合反演所得的最优双力偶机制解参数为,节面Ⅰ:方位角0°,倾角30°,滑动角78°;节面Ⅱ:方位角193°,倾角60°,滑动角96°;震源深度18km。为了验证联合反演的有效性和可靠性,采用由重抽样理论发展而来的Bootstrap 方法,对近远震数据分别进行了重采样,并对其单独反演和联合反演所得的参数进行了统计,验证了联合反演的有效性及稳定性,并发现远震反演震源深度的结果一定程度上受台站分布的影响,若要获得精确的震源深度则需要方位角分布较好的远震台站记录。根据前人对集集地震及车笼埔断层的研究成果以及南投地震的发震断层性质接近车笼埔断层的认识,推测此次地震可能发生在车笼埔断层上。