Ammonium regeneration in intertidal sediments of the Yangtze estuary during air-exposure

The influences of exposure to the atmosphere on ammonium cycle in the intertidal surface sediments were in situ studied with a geochemical approach at a typical station in the Yangtze Estuary during three tidal cycles in September 2003. During an about 8-h emersion period of each diurnal tide, six high-resolution vertical profiles of adsorbed and dissolved ammonium were measured. It was observed that both adsorbed and dissolved ammonium generally had an increasing trend in sediment cores during the exposure. The rate of ammonium regeneration in sediments was estimated using the accumulation amount of ammonium including adsorbed and soluble fractions during the daytime emersion. The calculation result showed that there was relatively high ammonification rate (˜500 nmol N cm⁻³ day⁻¹), which reflected that organic nitrogen in sediments was quickly decomposed with a residence time of ˜52.7 days. Due to the dramatic temperature difference observed in sediment profiles, free convection was considered an important mechanism of regulating the efflux of produced ammonium into overlying waters. The total estimated amount of regenerated ammonium was ˜1.35×10⁵ t N year⁻¹ in the intertidal flat of the Yangtze Estuary, which occupied 7.6% of the total inorganic nitrogen annually transported to the estuarine ecosystem.     

Seismic response predictions of multi‐span steel bridges through pushover analysis

In the new trend of seismic design methodology, the static pushover analysis is recommended for simple or regular structures whilst the time‐history analysis is recommended for complex structures. To this end, the applicable range of the pushover analysis has to be clarified. This study aims at investigating the applicability of pushover analysis to multi‐span continuous bridge systems with thin‐walled steel piers. The focus is concentrated on the response demand predictions in longitudinal or transverse directions. The pushover analysis procedure for such structures is firstly summarized and then parametric studies are carried out on bridges with different types of superstructure‐pier bearing connections. The considered parameters, such as piers' stiffness distribution and pier–0.5ptdeck stiffness ratio, are varied to cover both regular and irregular structures. Finally, the relation of the applicability of pushover analysis to different structural formats is demonstrated and a criterion based on the higher modal contribution is proposed to quantitatively specify the applicable range. Copyright © 2003 John Wiley & Sons, Ltd.     

华北北部场源前兆观测资料分析(一)──场源前兆特征与机制

1976年唐山地震前，在距震源很远的地区内都观测到一些前兆趋势变化，如重力、重力位二次徽商W△、水氧、地电阻率、水位和油井出油量等变化。作者认为这些变化不是由震源体直接引起的，而是在区域应力场的作用下，在某些活动断层附近，浅层岩，尤其是含水砂岩层和含油层受挤压出现的一些与地震有关的异常现象。其特征是：（1）异常范围大，可能在距震源很远的地方发生，但就同一种方法的多个观测点来说却又是局部的，即只有其中部分测点才能观测到异常，不少测点观测不到异常。（2）异常发生的时间大致相同。有些异常有同步变化的特征，如同时上升或同时下降。（3）临震前多数异常有恢复的趋势。这些特征与引起异常的机理有关。作者还从理论上计算了这种趋势异常量级，重力变化100×10-6cm／s2左右，重力位二次微商变化（1～2）×10－9／s2，地电阻率变化2％～3％，Rn变化7．4～11．1Bq／L，这样的变化量在活动断层附近的一些台站可能观测到。作者还研究了干旱降雨对某些前兆的影响，其影响量级可以被一些方法观测到，因此在确定是否是地震异常时，必须注意利用综合分析的方法排除干旱降雨的影响，减少异常的多解性。     

对黄河黑山峡大柳树坝址地震基本烈度的讨论

大柳树坝址的地震基本烈度是一个长期争议的问题，目前被定为Ⅷ度。生产争议的焦点在于对中卫一同心断裂带的评价。根据作者的研究，该带不是１７０９年中卫７．５级地震的发震断层，该带不会发生大于６级地震，包括Ｆ２０１在内的西段不会发生大于５级地震，对坝址所产生的影响烈度不会超过Ⅶ度；更外围地区的地震也不会产生超过Ⅶ度的影响烈度。大柳树坝址的基本烈度应以Ⅶ度为宜。     

90年代世界贸易发展及空间格局变化的新特点

在世界贸易组织、日趋强烈的开放的区域主义倾向、跨国公司强劲的直接投资影响下，世界贸易正在经历着巨大变化，处在一个新的转换时期。本文从影响当今世界贸易发展的多重因素分析，揭示90年代世界贸易增长、内容结构以及空间格局发展变化的新特征，并展望世界贸易的未来发展。     

雅砻江畔雅江县城区地质灾害特征及其防治对策

四川省雅江县城座落于雅砻江河畔。在城区０．８４ｋｍ＾２范围内发育有城南滑坡，城区斜 地面变形、城东危岩和城北滑坡四大地质灾害单元，构成了较为罕见的雅江县城独特的地质灾害特征。论述了雅江县城稆种地质这为害的特征及危害性，并对各咱地质灾害单元按其轻重缓解提出相的防治措施和对策。     

重庆市地学旅游资源研究

重庆市的地学旅游资源极其丰富，可划分为岩石圈旅游资源等4个大类、地质旅游资源等11个基本类型、地层旅游景观等18种景观和黔江县上白垩统正阳组剖面等107个景区(景点)。它们具有类型齐全、分布广泛、岩溶精品和森林独特的特点。从加强岩溶旅游资源调查等6个方面入手，就可提高对它们的开发利用程度.     

基于GPS掩星技术反演大气参数模型的优化

准确掌握地球大气中的水气分布，了解水气变化趋势对天气现象、全球气候变化、数值预报具有理论研究及实用价值。以无线电掩星技术为基础，利用掩星数据反演大气参数剖面。对原反演模型的不足进行了论证，并给出了反演个例。详细地论述了通过引入MM5先验温度T再通过线性迭代的方法反演对流层下部水汽廓线原理，给出了优化后模型反演个例。并对模型优化后反演廓线中存在的问题进行了分析，提出了下一步优化方向。     

一种组合优化的多边形化简方法

以多边形轮廓为目标 ,依据曲线特征点将其分解为一系列的弯曲特征 ,并对此弯曲特征集实施组合优化 ,将入围弯曲首尾相连 ,即可得到最终的化简结果