上海地震台阵的地震定位方法

详细介绍了上海地震台阵数据处理软件系统中的地震定位方法，用台阵的聚束方法得到地震的方位角和视慢度，根据统计得到的视慢度－震中距表推算震中距。并结合了地震台网的定位方法，由单台记录的各类主要震相从J－B走时表得到震中距，然后进行地震定位。该定位方法可对近震、远震进行定位处理，并由深震相得到震源深度。     

Precise revision of the garnet-muscovite geothermometer

The garnet-muscovite geothermometer was refined through empirical calibration by using natural rocks metamorphosed under the physical conditions of 238—1306 MPa and 490—700℃. Input temperatures and pressures were determined through simultaneously applying the garnet-biotite geothermometer and the garnet-biotite-plagioclase-quartz barometer, assuming that all FeO in muscovite and garnet be ferrous. Garnet was treated as the asymmetric quaternary solid solution, and muscovite as the symmetric binary solid solution. Input muscovite compositions include Fe atoms between 0.03—0.19 and Mg atoms between 0.04—0.16 on the basis of 11 oxygen atoms, and input garnet compositions include spessartine fractions between 0.01—0.289, grossular fractions between 0.028—0.273, and the Fe/Mg ratio between 3.387-18.986. The resulting garnet-muscovite geothermometer reproduces temperatures within (50℃ compared with the garnet-biotite thermometer. Total random error of ±37℃ of the new thermometer may stem from the pressure uncertainty of ±200 MPa, and uncertainties of ±5% of Fe and Mg components in muscovite, and ±5% of Fe, Mg, Mn and Ca components in garnet, altogether. When there exist 10%, 20%, 30%, 40% and 50% Fe3+ in muscovite, respectively, the computed garnet-muscovite temperatures will be 1—6℃, 2—12℃, 3—16℃, 5—24℃ and 7—29℃, respectively, lower than those obtained when assuming that all FeO be ferrous. The new garnet-muscovite geothermometer can efficiently reflect temperature change of typical prograde sequences and contact aureole rocks, and may be applied to low- to high-grade and low- to high-pressure metamorphic rocks.     

Velocity profile of a sand cloud blowing over a gravel surface

Particle dynamic analyzer (PDA) measurement technology was used to study the turbulent characteristics and the variation with height of the mean horizontal (in the downwind direction) and vertical (in the upward direction) particle velocity of a sand cloud blowing over a gravel surface. The results show that the mean horizontal particle velocity of the cloud increases with height, while the mean vertical velocity decreases with height. The variation of the mean horizontal velocity with height is, to some extent, similar to the wind profile that increases logarithmically with height in the turbulent boundary layer. The variation of the mean vertical velocity with height is much more complex than that of the mean horizontal velocity. The increase of the resultant mean velocity with height can be expressed by a modified power function. Particle turbulence in the downwind direction decreases with height, while that in the vertical direction is complex. For fine sands (0.2–0.3 mm and 0.3–0.4 mm), there is a tendency for the particle turbulence to increase with height. In the very near-surface layer (<4 mm), the movement of blown sand particles is very complex due to the rebound of particles on the bed and the interparticle collisions in the air. Wind starts to accelerate particle movement about 4 mm from the surface. The initial rebound on the bed and the interparticle collisions in the air have a profound effect on particle movement below that height, where particle concentration is very high and wind velocity is very low.     

Dynamic processes of a simple linear dune—a study in the Taklimakan Sand Sea, China

Samples of dune sands, surveys of the morphology and field measurements of wind velocity and direction of a simple linear dune in Taklimakan Sand Sea show that the airflow and sand flux vary with the change of wind direction on the dune surface. Decrease of the airflow stress on the lee flank does not result in much decrease of the sand flux because of the low threshold shear velocities and the airflow conditions. There are no significant relations between the sand flux on the lee flank and the angle of incidence of the airflow. The low threshold shear velocities and the maintenance of the sand flux at the lee flank are the main mechanisms keeping the linear shape of the dunes. Measurements of the sand flux shows that it reaches a maximum on the crest of the dune. The grain size of the transported sands has some differences compared to that of the dune surface. The sands transported are finer than that on the dune surface, but better sorted under the influence of the medium to low wind activity. The field experiment results exhibit that it is possible for the dunes to be shaped as linear dunes during the processes of accumulation and elongation.     

测井资料交会图法在火山岩岩性识别中的应用

在火山岩储层研究中，岩性识别显得越来越重要。在评述目前常用的岩性识别方法后，重点以测井资料交会图法为例，以松辽盆地徐家围子断陷升平气田深层白垩系营城组火山岩为对象，优选出密度测井、自然伽玛测井、声波测井、电阻率、钍铀等测井项目的数据进行交会，编制出测井曲线交会图版，并以此为依据识别出该区的火山岩主要岩性有：安山岩、玄武岩、流纹岩和凝灰岩等。识别结果与实际情况相吻合。     

基于OpenGL的多层三维空间实体叠加建模

多层三维空间实体普遍存在于现实生活中。借助于目前国际最广泛应用的三维图形接口OpenGL将其真实地显示出来，具有重要的现实意义。其中多层三维空间实体建模技术是显示过程的关键步鼻。在实现单层空间实体三维建模的基础上，利用OpenGL实现了多层三维空间实体叠加建模，叠加实现的过程及其属性数据的表示方法。     

弹性地基接缝板模量反演和地基脱空判定

用有限单元法建立了可考虑接缝和地基脱空的弹性地基板位移计算模型。并根据系统识别原理，建立了接缝地基板弹性模量的反演分析方法。最终提出了利用FWD实测板中弯沉盆数据反演面板与地基弹性模量、根据板角(板边)弯沉值判定地基脱空面积的迭代方法。     

Principle and mathematical method for inverting stress State of a medium from the remote sensing data

It has been proved through experiments that the electromagnetic radiation energy of a substance will vary when stress acts on the substance. This moment, the electromagnetic radiation energy (observation value) received by the remote sensor is triggered not only by the substance temperature and also by the stress. Separating quantitatively these two kinds of electromagnetic radiation energy and then inversing the actual temperature state and stress state of a medium is a matter with practical significance in earthquake prediction and stability monitoring for the large-scale geotechnical engineering. In this paper the principle and the mathematical method for inversing stress by using multiband remote sensing data are discussed in detail. A calculation example is listed.     

A synthetic optimization analysis method on structures with viscoelastic dampers

The paper introduces a synthetic optimization analysis method of structures with viscoelastic (VE) dampers, namely the simplex method. The optimal parameters and location of VE dampers can be determined by this method. Numerical example and a shaking table test about reinforced concrete structures with VE dampers show that the seismic responses of structures will be reduced more effectively when the parameters and location of VE dampers are designed in accordance with the results calculated by the simplex method.