一类广义Hamilton系统的辛格式

通过引人泊松括号，分析了无限维Hamilton的性质，并将其推广到广义Hamilton系统，且从理论和实用角度讨论了这类广义Hamilton系统的辛格式构造问题，从而为辛几何算法在一般的时间发展方程的数值求解提供新的具体途径。     

An algorithm for determination of aerosol opticalthickness from AVHRR imagery over oceans

Summary The uncertainty in aerosol size distributions is a main source of errors in aerosol optical thickness determined from satellite measurements. To reduce the errors resulting from the uncertainty in aerosol size distributions, we have performed sensitivity analyses. It is found the errors resulting from the uncertainty in aerosol size distribution can be considerably reduced by using the Junge power law to approximate the aerosol size distribution in an actual atmosphere, if the exponent value is determined at the same time. An iterative algorithm is then developed for the simultaneous determination of aerosol optical thickness and the exponent of the Junge power law over ocean areas from the upwelling radiances measured in AVHRR visible and near infrared channels. A number of numerical experiments are carried out to investigate the validity of the Junge power law approximation by assuming the aerosol size distributions in an actual atmosphere are bimodal with different mode parameters, and by using the actual aerosol size distributions determined at several places by Kaufman et al. (1994). The results show that the errors in determined aerosol optical thickness resulting from the Junge power law approach are significantly reduced. The iterative algorithm is investigated further by comparing the aerosol optical thickness deduced from satellite measurement with that observed by a sun photometer. Received October 10, 2001 Revised December 28, 2001     

Application of Linear Thermodynamics to the Atmospheric System. Part Ⅰ: Linear Phenomenological Relations and Thermodynamic Property of the Atmospheric System

从一般的热力学原理或其它自然原理对唯象关系所强加的限制，能够演绎出大气系统的一系列热力学性质。利用非平衡态线性热力学导出了湍流K闭合理论中湍流交换系数同唯象系数的关系，从理论上证明大气系统热量湍流输送同水泡之间存在交叉耦合，还导出了湍流强度同速度和位温梯度的关系，从而证明速度和位温空间分布的非均匀性是湍流之源。并证明湍流强度定理，不可压缩气体和各向同性湍流大气中，湍流强度正比于速度与位温梯度的标积。进而证明大气涡旋定理，位温的切变将导致涡旋运动或各种环流运动，速度涡度等于速度同位温相对梯度的矢积。展现了线性热力学在大气系统的应用前景。     

准噶尔盆地西北缘侏罗系储层

准噶尔盆地西北缘侏罗系陆相碎屑岩储层的岩性差异较大，岩性对物性的控制作用明显。储层的孔隙类型多样，不同类型的孔隙在发育规模、丰度及有效性方面都存在显差异，次生溶蚀孔隙、原生粒间孔隙和残余粒间孔隙是最重要的有效孔隙类型。储层渗透率与孔隙度之间存在较好的半对数相关关系。通过设置一定的孔隙度和渗透率参数界线，对储层储集性能进行评价，将侏罗系储层的孔渗性能划分为5个级别，可与当前流行的砂岩储层孔渗性能分级相对应。通过对大量压汞参数样本的聚类分析，将储层的孔隙结构划分为4个类型。通过各类参数统计及曲线形态对比，对孔隙结构类型进行了定量结合定性的优劣评价。最后，结合孔渗性能级别、储集空间类型、孔隙结构类型、岩性等特征，对准噶尔盆地西北缘侏罗系储层进行了综合分类评价。     

论卡以头组的时代

中国科学院南京地质古生物研究所的有关人员 (1980 )曾做过大量地层古生物工作 ,证实卡以头砂页岩层或卡以头组的时代为三叠纪最早期 ,是飞仙关组底部地层的相变。“论卡以头组”一文认为该组下部的时代为二叠纪 ,上部则属三叠纪。对该文提供的地层古生物资料进行分析后 ,本文作者认为该论点缺乏证据 ,不能成立 ;将陆相的威宁哲觉剖面代替标准地点宣威羊场的过渡相剖面作为卡以头组的标准剖面 ,也是不合适的     

ODP 1144站钻孔沉积物中微玻璃陨石的元素地球化学特征

利用电子探针和激光探针等离子体质谱方法分析了取自南海北部的ODP1144钻孔沉积物中的微玻璃陨石和取自邻近的广东省湛江和吴川玻璃陨石的主元素和微量元素组成。结果显示，这些微玻璃陨石属于亚洲-澳大利亚散落区的普通微玻璃陨石。从成分上看，这些微玻璃陨石存在两种不同的类型，其中的绝大部分Al2O3含量在19.0%以上，属于高Al类型，相应的难熔微量元素含量也比较高；个别微玻璃陨石Al2O3含量（13.0%)和难熔微量元素含量较低，微量元素含量和特征比值都与邻近的广东省湛江和吴川的玻璃陨石相近。元素地球化学特征意味着，这些微玻璃陨石来源于同一靶源区，但靶区的物质组成并不均一。     

Structural damage detection using the optimal weights of the approximating artificial neural networks

This work presents a novel neural network‐based approach to detect structural damage. The proposed approach comprises two steps. The first step, system identification, involves using neural system identification networks (NSINs) to identify the undamaged and damaged states of a structural system. The partial derivatives of the outputs with respect to the inputs of the NSIN, which identifies the system in a certain undamaged or damaged state, have a negligible variation with different system errors. This loosely defined unique property enables these partial derivatives to quantitatively indicate system damage from the model parameters. The second step, structural damage detection, involves using the neural damage detection network (NDDN) to detect the location and extent of the structural damage. The input to the NDDN is taken as the aforementioned partial derivatives of NSIN, and the output of the NDDN identifies the damage level for each member in the structure. Moreover, SDOF and MDOF examples are presented to demonstrate the feasibility of using the proposed method for damage detection of linear structures. Copyright © 2001 John Wiley & Sons, Ltd.     

A mathematical hysteretic model for elastomeric isolation bearings

An analytical model for high damping elastomeric isolation bearings is presented in this paper. The model is used to describe mathematically the damping force and restoring force of the rubber material and bearing. Ten parameters to be identified from cyclic loading tests are included in the model. The sensitivity of the ten parameters in affecting the model is examined. These ten parameters are functions of a number of influence factors on the elastomer such as the rubber compound, Mullins effect, scragging effect, frequency, temperature and axial load. In this study, however, only the Mullins effect, scragging effect, frequency and temperature are investigated. Both material tests and shaking table tests were performed to validate the proposed model. Based on the comparison between the experimental and the analytical results, it is found that the proposed analytical model is capable of predicting the shear force–displacement hysteresis very accurately for both rubber material and bearing under cyclic loading reversals. The seismic response time histories of the bearing can also be captured, using the proposed analytical model, with a practically acceptable precision. Copyright © 2002 John Wiley & Sons, Ltd.     

Tests on low‐ductility RC frames under high‐ and low‐frequency excitations

The response of low‐ductility reinforced concrete (RC) frames, designed typically for a non‐seismic region, subjected to two frequencies of base excitations is studied. Five half‐scaled, two‐bay, two‐storey, RC frames, each approximately 5 m wide by 3.3 m high, were subjected to both horizontal and/or vertical base excitations with a frequency of 40 Hz as well as a lower frequency of about 4 Hz (close to the fundamental frequency) using a shake table. The imposed acceleration amplitude ranged from 0.2 to 1.2g. The test results showed that the response characteristics of the structures differed under high‐ and low‐frequency excitations. The frames were able to sustain high‐frequency excitations without damage but were inadequate for low‐frequency excitations, even though the frames exhibited some ductility. Linear‐elastic time‐history analysis can predict reasonably well the structural response under high‐frequency excitations. As the frames were not designed for seismic loads, the reinforcement detailing may not have been adequate, based on the crack pattern observed. The effect of vertical excitation can cause significant additional forces in the columns and moment reversals in the beams. The ‘strong‐column, weak‐beam’ approach for lateral load RC frame design is supported by experimental observations. Copyright © 2001 John Wiley & Sons, Ltd.     

Optimal design of passive energy dissipation systems based on H∞ and H2 performances

Passive energy dissipation devices (EDDs), such as viscous dampers, viscoelastic dampers, etc., have been used to effectively reduce the dynamic response of civil infrastructures, such as buildings and bridges, subject to earthquakes and strong winds. The design of these passive energy dissipation devices (EDDs) involves the determination of the optimal locations and the corresponding capacities. In this paper, we present two optimal design methodologies for passive EDDs based on active control theories, including H_∞ and H₂ performances, respectively. The optimal design methodologies presented are capable of determining the optimal locations and the corresponding capacities of EDDs. Emphasis is placed on the application of linear matrix inequality (LMI) for the effective design of passive EDDs using the popular MATLAB toolboxes. One important advantage of the proposed approaches is that the computation of the structural response is not needed in the design process. The proposed optimal design methodologies have been applied to: (i) a 10‐storey building and a 24‐storey building both subject to earthquake excitations, and (ii) a 76‐storey wind‐excited benchmark building, to demonstrate the advantages of the proposed design methodologies over the conventional equal capacity design. Copyright © 2002 John Wiley & Sons, Ltd.