人工触发闪电电流测量及特征性分析

通过对１９９３年７月２７日的人工触发闪电电流、跨步电压的直接测量结果的分析发现,在正电场下触发的慢型放电过程由连续电流和双极性的电流脉冲过程组成,其放电特性与雷暴的电特性有关。闪电电流最大值为１．２ｋＡ,持续时间为２５ｍｓ,中和电荷量为８．９Ｃ。跨步电压与电流的测量结果相一致,是一种间接测量电流的方法。     

On the internal structure and magnetic fields of

First, a sequence of four-zone models for the interior of Venus is constructed under the assumption of hydrostatic equilibrium. While the equation of state for each zone is taken to be the Bullen's relation with its coefficients consistent with the PREM Earth model (Dziewonski and Anderson, 1981), the position of core-mantle boundary is determined by matching solutions of the Emden's equation in different regions. The results of hydrostatic models indicate the presence of a reasonably large molten iron core in Venus, broadly similar to the Earth. It is also found that the position of the core-mantle interface is nearly model-independent. Second, we focus on the question why Venus does not possess a significant global magnetic field and on what we can learn from this fact. Solutions of magnetohydrodynamic equations appropriate for the molten core of Venus are discussed. It is argued that, because the Elsasser number measuring the relative importance of Coriolis and Lorentz forces satisfies 1, equations for the problem of thermal convection in the Venusian fluid core must be nearly uncoupled with the dynamo equation. The existence of a global magnetic field, though small, then suggests that the size of the magnetic Reynolds numberR _m must beR _m =O(10), sustaining a dynamo action near its marginal state but not an active dynamo in the Venusian molten core. On the basis of asymptotic relations for finite amplitude convection, a useful constraint on important physical parameters for the liquid core of Venus is derived and discussed.     

新地球观

One of the most important achivements on science in 20th century is the new recognition on the Earth:the Earth,out of the other planets, exhibits very peculiar features because it has an extremely complex and active periphery part (surfacial layers). This periphery part is an open system sustained by inputting solar energe , which is captured , transfered and stored by life. Through the system , cyclings of matters and energe flow are driven and regulated by life activities. This system is self-equilibrated,self-controlled and far away from astrophysical and thermodynamic equilibria mainly because of life and life activities.
Development of human calture influences increasingly on流Earth's periphery system , at last , the natural biosphere that has existed for 3 billion years on the Earth's surface will inavoidably be replaced by so called "noosphere",which is man一reconstructed,man-controlled and unstable system. Thus the fate of the Earth,to a great extent,will be determined by the direction of human calture evolution.
     

“煤特征指数”与矿井瓦斯危险类型的关系

矿井瓦斯危险程度与煤层中瓦斯赋存状况及其泄出方式有关,并取决于多种地质条件和采掘工艺。其中,煤特征条件特别重要。本文分析了湖南省的5种矿井瓦斯危险类型以及相应的煤特征条件,提出了“煤特征指数(I_c)”这一概念。I_c是一项评价矿井瓦斯危险程度的综合指标。研究表明,矿井瓦斯危险愈严重,则其I_c值愈高。应用该项成果预测了16对矿井的瓦斯危险类型,取得了满意的效果。     

Structure and oscillations in quiescent filaments from observations in He i λ10830 å

Observations of two quiescent filaments show oscillatory variations in Doppler shift and central intensity of the He i 10830 Å line.The oscillatory periods range from about 5 to 15 min, with dominant periods of 5, 9, and 16 min. The 5-min period is also detected in the intensity variations, after correction for atmospheric effects. Doppler shifts precede intensity variations by about one period. The possibility that the oscillations are Alfvén waves is discussed.The Doppler signals of the filament form fibril-like structures. The fibrils are all inclined at an angle of about 25° to the long axis of the filament. The magnetic field has a similar orientation relative to the major direction of the filament, and the measured Doppler signals are apparently produced by motions along magnetic flux tubes threading the filament.The measured lifetimes of the small-scale fibrils of quiescent disk filaments are very likely a combined effect of intensity modulations and reshuffling of the structures.     

Soil quality changes in land degradation as indicated by soil chemical, biochemical and microbiological properties in a karst area of southwest Guizhou, China

Not only the nutritional status and biological activity but also the soil ecological functioning or soil health has been impacted profoundly by land degradation in the karst area of southwest China where the karst ecosystems are generally considered as extremely vulnerable to land degradation under intensified land-use changes. The objectives of this study are to elucidate the changes in overall soil quality by a holistic approach of soil nutritional, biological activity, and soil health indicators in the karst area as impacted by intense cultivation and vegetation degradation. Topsoil samples were collected on selected eco-tesserae in a sequence of land degradation in a karst area of southwest Guizhou in 2004. The soil nutrient pools of organic carbon (C_org), extractable extracellular carbon (C_ext), total soil nitrogen (N_t), alkali-hydrolyzable nitrogen (N_ah), total phosphorus (P_t), available phosphorus (P_a) were analyzed by wet soil chemistry. The soil biological properties were studied by means of measurements of microbial biomass carbon (both by fumigation–extraction, FE-C_mic, and by calculation from substrate-incubation respiration, SIR-C_mic) of respiration [respiration without addition of substrates, basal respiration (BR), and potential respiration (PR) with substrate-incubation] and of soil enzyme activities (invertase, urease, and alkaline phosphatase). Soil health status was assessed by simple indices of C_mic/C_org and BR/C_mic in conjunction with bacterial community structures determined by polymerase chain reaction and denaturing gradient gel electrophoresis. While the nutritional pool parameters, such as C_org and C_ext, described basically the changes in soil life-supporting capacity with cultivation interference and vegetation declined, those parameters of biological activity such as FE-C_mic, SIR, and SIR-C_mic as well as bacterial community structures measured by molecular method evidenced well the changes in soil functioning for ecosystem health with the land degradation.     

Traction image method for irregular free surface boundaries in finite difference seismic wave simulation

In this study, we propose a new numerical method, named as Traction Image method, to accurately and efficiently implement the traction-free boundary conditions in finite difference simulation in the presence of surface topography. In this algorithm, the computational domain is discretized by boundary-conforming grids, in which the irregular surface is transformed into a 'flat' surface in computational space. Thus, the artefact of staircase approximation to arbitrarily irregular surface can be avoided. Such boundary-conforming gridding is equivalent to a curvilinear coordinate system, in which the first-order partial differential velocity-stress equations are numerically updated by an optimized high-order non-staggered finite difference scheme, that is, DRP/opt MacCormack scheme. To satisfy the free surface boundary conditions, we extend the Stress Image method for planar surface to Traction Image method for arbitrarily irregular surface by antisymmetrically setting the values of normal traction on the grid points above the free surface. This Traction Image method can be efficiently implemented. To validate this new method, we perform numerical tests to several complex models by comparing our results with those computed by other independent accurate methods. Although some of the testing examples have extremely sloped topography, all tested results show an excellent agreement between our results and those from the reference solutions, confirming the validity of our method for modelling seismic waves in the heterogeneous media with arbitrary shape topography. Numerical tests also demonstrate the efficiency of this method. We find about 10 grid points per shortest wavelength is enough to maintain the global accuracy of the simulation. Although the current study is for 2-D P-SV problem, it can be easily extended to 3-D problem.     

Vertical distribution and water solubility of phosphorus and heavy metals in sediments of the St. Lucie Estuary, South Florida, USA

Accumulation and distribution of heavy metals and phosphorus in sediments impact water quality. There has been an increasing concern regarding fish health in the St. Lucie Estuary, which is related to increased inputs of nutrients and metals in recent decades. To investigate vertical changes of contaminants (P, Cd, Cr, Co, Cu, Ni, Pb, Zn, and Mn) in sediments of the St. Lucie Estuary in South Florida, 117 layer samples from six of the 210 to 420 cm depth cores were analyzed for their total and water-soluble P and heavy metals, clay, total Fe, Al, K, Ca, Mg, Na, and pH. Principal component analysis (PCA) was used in two sets of analytical data (total and water-soluble contaminant concentrations) to document changes of contaminants in each core of sediments. The PCA of total contaminants and minerals resulted in two factors (principal components). The first and second factors accounted for 61.7 and 17.2 % of the total variation in all variables, and contrast indicators associated with contaminants of P, Cd, Co, Cr, Ni, Pb, Zn, and Mn and accumulation of Fe and Al oxides, respectively. The first factor could be used for overall assessment of P and heavy metal contamination, and was higher in the upper 45–90 cm than the lower depths of each core. The concentrations of P and heavy metals in the surface layers of sediments significantly increased, as compared with those in the sediments deeper than 45–90 cm. The PCA of water-soluble contaminants developed two factors. The second factor (Cu–P) was higher in the upper than the lower depths of the sediment, whereas the highest score of the first factor (Cd–Co–Cr–Ni–Pb–Zn–Mn) occurred below 100 cm. The water-soluble Cu and P concentrations were mainly dependent on their total concentrations in the sediments, whereas the water-soluble Cd, Co, Cr, Ni, Pb, Zn, and Mn concentrations were mainly controlled by pH.