罗德里格矩阵在共线方程严密解法中的应用

在共线方程严密解法中,人们习用的是以方位元素X_s,Y_s,Z_s,φ,ω,κ为未知数的严密公式。本文则以罗德里格旋转矩阵的三个独立元素b,a,c取代角方位元素φ,ω,κ,并推导了相应的误差方程式。理论表明,新方法在组成旋转矩阵和计算误差方程系数中只需作加、减、乘、除等运算而不需解求三角函数,因而节省了计算工作量。     

哀牢山—红河构造带古新世以来多期活动的构造和年代学证据

哀牢山—红河构造带哀牢山段可划分为东部高级变质带和西部低级变质带。构造分析表明:该构造带由3个不同变形域组成,可能代表其经历的3期左行走滑。第1期走滑发生在整个高级变质带,为拉张性左行走滑,形成角闪岩相L型构造岩。第2期走滑形成高级变质带中的高应变带,变形体制接近简单剪切,形成绿片岩相L-S型糜棱岩。第3期主要发生在低级变质带,为挤压性走滑,形成左行逆冲构造格局,并形成低绿片岩相千糜岩。地质年代学数据证明,3期左行走滑的形成时代分别是:距今58~56Ma、27~22Ma和13~12Ma±。哀牢山—红河构造带第1期左行走滑可能对应于印度与欧亚大陆距今60Ma左右的初始碰撞;第2期变形与青藏高原最强的挤压隆升期一致;第3期事件可能代表距今16~13Ma开始的青藏高原物质进一步东挤。哀牢山—红河构造带的3期主要左行走滑均发生在新生代印度与欧亚大陆的汇聚过程中。     

全球旋回地层学

全球旋回地层学是指在对全球沉积岩进行综合系统研究之基础上，通过估算沉积盆地中源于物源区的沉积物类型和沉积环境条件变化，来预测地层学特征的一种过程一结果模型。其研究内容包括对全球地质演化时期全球海平面变化、全球气候条件、全球构造运动、全球古地理背景、全球沉积环境特征、全球古生物事件及全球矿产形成过程进行动态模拟，强调古气候在地质记录中的意义，注重沉积记录的全球同时性研究；强调各种事件在沉积作用中的意     

黑龙江尚志黑龙宫铜矿点氧同位素勘查找矿

黑龙江黑龙宫地区地表４３个不同性质蚀变石δ＾１８Ｏ值从－２．２％到１１．５％，勾画出一个中心高＾１８Ｏ带和周围低＾１８Ｏ带。结合该地区地质特征以及已知氧同位素勘查模型，推断黑龙宫地区具一层圈＾１８Ｏ带多中心水－岩交换的成矿地区，隐伏矿体可能位于中心高＾１８Ｏ带。     

硅灰石、透辉石在陶瓷中的基本反应和作用

本文以硅灰石和高岭石、透辉石和高岭石为端元组分,推导了二元假相图。根据这两个假相图,提出了四个基本固相反应。用这些基本反应以及硅灰石、透辉石的矿物学性质,说明了它们对陶瓷坯体工艺性能的作用。     

一次春季罕见的降水天气过程分析

对吉林省2005年春季（4月19--22日）罕见的降水天气过程在大尺度环流形势、物理条件分析的基础上,重点对其逐时自动站风场资料进行分析,结果表明利用逐时自动站风场分析的中尺度切变对强降水落区、降水强度和强降水发生的时间都具有很好的指示意义;中尺度切变的形成也与地形条件有关。     

A multiscale finite element formulation for axisymmetric elastoplasticity with volumetric locking

Similar to plane strain, axisymmetric stress problem is also highly kinematics constrained. Standard displacement‐based finite element exhibits volumetric locking issue in simulating nearly/fully incompressible material or isochoric plasticity under axisymmetric loading conditions, which severely underestimates the deformation and overestimates the bearing capacity for structural/geotechnical engineering problems. The aim of this paper is to apply variational multiscale method to produce a stabilized mixed displacement–pressure formulation, which can effectively alleviate the volumetric locking issue for axisymmetric stress problem. Both nearly incompressible elasticity and isochoric J₂ elastoplasticity are investigated. First‐order 3‐node triangular and 4‐node quadrilateral elements are tested for locking issues. Several representative simulations are provided to demonstrate the performance of the linear elements, which include the convergence study and comparison with closed‐form solutions. A comparative study with pressure Laplacian stabilized formulation is also presented. Copyright © 2009 John Wiley & Sons, Ltd.     

Oil source analysis of Upper Tertiary Shawan Formation in Chepaizi area,in the northwest margin of Junggar basin

Well che89, located in the Chepaizi area in the northwest margin of Junggar basin, acquires high production industrial oil flow, which is an important breakthrough in the exploration of the south foreland slope area of Junggar basin. The Chepaizi area is near two hydrocarbon generation depressions of Sikeshu and Shawan, which have sets of hydrocarbon source rock of Carboniferous to Jurassic as well as Upper Tertiary. Geological and geochemical parameters are proper for the accumulation of mixed source crude oil. Carbon isotope, group composition and biomarkers of crude oil in Upper Tertiary of well Che89 show that the features of crude oil in Upper Tertiary Shawan Formation are between that of Permian and Jurassic, some of them are similar to these two, and some are of difference, they should be the mixed source of Permian and Jurassic. Geochemical analysis and geological study show that sand extract of Lower Tertiary Wulunguhe Formation has the same source as the crude oil and sand extract of Upper Tertiary Shawan Formation, but they are not charged in the same period. Oil/gas of Wulunguhe Formation is charged before Upper Tertiary sedimentation, and suffered serious biodegradation and oxidation and rinsing, which provide a proof in another aspect that the crude oil of Upper Tertiary Shawan Formation of well Che89 is not from hydrocarbon source rock of Lower Tertiary.