Rock Mass Deformation Characteristics in High-Steep Slopes Influenced by Open-Pit to Underground Mining

In Daye Iron Mine, the open-pit mining has ended and the underground mining started in 2003. The present pit slopes are as high as 430 m and the slope angle is up to 43°. During the process of open-pit to underground mining, the high-steep pit slopes would be affected by both open-pit mining and underground mining, and its deformation characteristics would become more complex. So in this paper, the trinity method of numerical simulation, model experiment and field test was adopted to analyze the displacement and stress fields systematically. The results show that: (1) Prominent rebound deformation occurs near the slope foot, which is induced by the unloading in open-pit mining. When it is backfilled to 0 m level, the rebound deformation decreases, which indicate that backfilling mass can restrict the deformation and improve the slope stability; (2) Subsidence dominates the slope deformation in open-pit to underground mining and it increases with an increasing elevation of monitoring point; the maximum horizontal displacement occurs in the lower part of the slopes, because the backfilled part is squeezed by both the north slope and the south slope, and it has a lower elastic modulus than the previous orebody; (3) The stress and its variability near the slope foot are much larger than other places, indicating that the slope foot is most affected by stress redistribution and stress concentration may occur here; the stress at other stress monitoring points changes little, indicating that the influence of open-pit to underground mining is local; (4) The effect of underground mining on the deformation of the faults is not prominent; (5) Mining operations in near-ground part affect more on the variation of deformation and stress of pit slopes than that in deeper part.     

岩石中的压力影形成的实验观测研究

野外地质观察发现,在大陆地壳变质岩中可以广泛观察到围绕一个大的单晶或者硬质点的两端区域填充低粘度相物质形成的压力影。为了定量研究岩石材料中压力影的形成条件,本文利用高精度Paterson气体介质变形装置,对含有刚性球的圣卡罗橄榄石和洋中脊玄武岩(MORB)的混合物圆柱型样品进行了高温高压扭转变形试验。变形实验前样品的初始熔融均匀分布,比例为φ≈0.05,变形试件尺寸为D8.9mm×L5.5mm,内含8粒直径约1mm的刚性球。扭转变形试验温度为1473K,围压为300MPa,应变率为γ≈1×10~(-4)s~(-1),最大剪切变形为γ≈4。实验结果表明,岩石受到扭转力的作用产生变形之后,当局部剪切应变达到γ≈1时,可以在刚性球周围形成熔融富集带和熔融贫乏带,即压力影构造,围绕刚性球对称分布。由于熔融分布的不均一性,富集带熔融比例上升,最高可以达到φ_(high)=0.1~0.3,熔融贫乏带熔融比例下降,含量为φ_(low)=0.01~0.02。由于刚性球对其周围的压力分布的扰动区域大约为刚性球的尺度范围,因此,在离开刚性球一定距离后,熔融趋于均匀分布。     

Modification of strain wedge method for lateral soil-pile interaction in sandEI北大核心CSCD

A modified strain wedge (SW) method for analyzing the behavior of laterally loaded single piles in sand is proposed. The modified model assumes that the lateral displacements of a pile behind the three-dimensional passive soil wedge are nonlinear, which makes the horizontal soil strain variable with depths instead of a constant value in the original strain wedge model, and also employs two different hyperbolic models, one for describing horizontal stress increment-strain behavior of soil in the wedge, and the other for describing the shear stress-displacement property at the interface between soil and pile shafts. An example is analyzed to demonstrate the effectiveness of the modified method, and a good agreement is obtained. Finally, the effects of modifications on the lateral bearing capacity of pile shafts are discussed. The results show that the problem of overestimating the lateral bearing capacity of piles with strain wedge method can be ameliorated by introducing the assumption of nonlinear lateral displacements of piles. It makes the SW method more convenient and effective in analyzing the behavior of laterally loaded piles by introducing the new relationships of horizontal stress increment-strain and shear stress-displacement.     

基于热储法的鲁西平原地热资源评价

鲁西平原地处山东省的西南部,热储层主要有新近系馆陶组、明化镇组,古近系东营组和奥陶系。通过野外勘察和室内分析结果,选取合理的计算参数,利用热储法等对鲁西平原地热资源进行了评价。结果表明鲁西平原地区地热资源量达1.735 5×1021J,折合标准煤5.923 3×1010t;可利用地热资源量达3.252×1020J,折合标准煤1.110×1010t;热储层百年地热水储存量为4.229×1011 m3,地热水允许开发量为4.229×1011 m3。     

基于层区带刻度区地质特点的资源评价方法适用性分析

针对新型的层区带刻度区进行资源评价方法的适应性研究是长庆四次资评一项重要内容。采用油藏规模序列法、油藏过程模型法、容积法和饱和探井法4种资源评价方法,对具不同成藏特点的刻度区进行了深入的方法适用性分析和参数研究。研究结果表明,过程类资源评价方法对低渗透、特低渗透连续性岩性油藏,在以储量提交单元作为统计单元进行油藏发现序列与规模序列模拟时,计算参数的合理性与计算结果认知度很难达到统一。而勘探程度类资源评价方法,在深入的地质分析基础上,选择合理适宜的关键参数,是可以求得较为可信的地质资源量。当然,评价者对评价对象的认识程度和对评价方法的掌握程度也影响着资源评价的结果。     

底水油层水平井产液剖面均衡性评价

胜利油田开采底水特征高含水油层的水平井数量多,其中油层向水平井非均衡供液现象普遍。为评价此类水平井产液剖面均衡性,量化其生产动态改善潜力,定义了产液剖面基尼系数GN,并结合现场案例介绍其计算方法,随后统计胜利油田60口样本井,分析GN对见水时间tRL和底水突破前累积产油量QRL的影响,最后据此对GN分级。计算和分析结果表明:GN可以整体表征实际非均衡产液剖面偏离理想均衡产液剖面的程度,通常取值0~1之间,数值越大,均衡性越差;划分GN0.1为产液剖面不均衡,其样本井数54口,占比90%,以理想均衡产液状态为基准,tRL和QRL分别至少有100%和69.5%的提升潜力。