首都圈地区现今断层活动的数学模拟及地震危险性讨论

以首都圈地区现今活动断层上近２０年的位移测量资料为依据，用二维线弹性有限元对该区断层的活动特征进行了拟合，并结合有关资料讨论了该区的地震危险性。结果表明：１９７７－１９８６年间该区主压应力优势方位与华北较一致，约为Ｎ４５°－８０°Ｅ；１９８６－１９９０年其主压应力方向向北偏转，约为Ｎ５°－６０°Ｅ；１９９０年至现在其主压应力又向东偏转，角度大于第一阶段，约为Ｎ８０°－９５°Ｅ。该区的张家口－延庆一带近期有发生中强震的可能；丰镇－阳高－大同地区和凉城－古营盘地区应力较高，也应引起注意。     

大气垂直折射与时序垂直角值的谱分析

本文介绍了对时序垂直角观测值进行谱分析的方法和所得到的结论。使以往对于大气折射影响及其变化规律的定性认识得以定量化。     

Flow directions in ash-flow tuffs: a comparison of geological and magnetic susceptibility measurements, Tshirege member (upper Bandelier Tuff), Valles caldera, New Mexico, USA

This study concludes that the elongation axis (K ₁) of the ellipsoid of anisotropic magnetic susceptibility (AMS) is a suitable proxy for flow axis in ashflow tuffs. 153 oriented samples (176 specimens) were studied from 18 sites in the 1.1 Ma Tshirege member of the Bandelier Tuff. These sites are distributed around the Valles caldera at distances of 5–25 km outside of the rim.K ₁ axes correlate well with postulated radial flow axes at 13 sites.K ₁ also agrees with measured geological flow indicators, mainly imbricated larger clasts, at 7 sites. At 2 of the 5 sites where significant disagreement is seen between theoretical radial flow directions and measuredK ₁ axes, theK ₁ axes correspond well with geological flow indicators, indicating that the divergence of flow from the predicted radial flow pattern is real. Two major topographic buttresses are suggested as the cause of flow divergence for the Tshirege ash flows: the San Pedro buttress northwest of the caldera, and the San Miguel buttress in the southeast. In situK ₁ axes plunge about 7° toward the source at two-thirds of the sites; therefore the plunge ofK ₁ is a plausible in situ indicator for thedirection of flow. Multiple flow zones in sections of several meters thickness indicate changes of flow direction that are both rapid and large during ash-flow emplacement. These observations raisre the question of how best to represent mean flow directions in ash-flow sheets: by eigenvector methods, by vector-sum methods, or by modes. A method for measuring imbrication of larger clasts using apparent dips in vertical joints is outlined. Imbrication, determined in this way at one-third of the sites, dips toward the source, i.e., up-flow. The minimum (K ₃) axis of the AMS ellipsoid correlates with the flow foliation rather than with the larger clast imbrication. The flow axes of ash flows correspond with theK ₁ axes, not with the declination ofK ₃ axes as suggested by some authors. Initial dip of the sampled ash flows is not large and does not affect the paleomagnetic remanence direction, which is reversed with a mean ofD=173.5°,I=-38.4°, ₉₅=3.4°N=18. This mean is not different at the 95% confidence level from that of earlier workers. The mean pole, at 098.0°E, 74.8°N,A ₉₅=3.3°,N=18, is about 15° far-sided relative to the expected time-averaged geomagnetic pole, suggesting a history of emplacement too short to adequately average secular variation.     

On the practice of estimating fractal dimension

Coastlines epitomize deterministic fractals and fractal (Hausdorff-Besicovitch) dimensions; a divider [compass] method can be used to calculate fractal dimensions for these features. Noise models are used to develop another notion of fractals, a stochastic one. Spectral and variogram methods are used to estimate fractal dimensions for stochastic fractals. When estimating fractal dimension, the objective of the analysis must be consistent with the method chosen for fractal dimension calculation. Spectal and variogram methods yield fractal dimensions which indicate the similarity of the feature under study to noise (e.g., Brownian noise). A divider measurement method yields a fractal dimension which is a measure of complexity of shape.     

Commission health and development

IGU-Reports

Commission health and development     

Littoral '92

Reports

Littoral '92     

岩体三维节点偶对分析及其应用

本文讨论了节点偶对分析的三维扩展。节点偶对分析是针对摩擦滑动节理单元的约束边界进行的序列矢量判定。在三维节理单元的分析中,几何约束和相应的力学判据极为复杂,采用节点偶对等效结合力方法才能迎刃而解。文中对三维转向节理模型的分析得到合理的结果,它表明本文所提出的方法可成功地应用于节理岩体的有限元分析。     

造山带中富集型上地幔的成因——以萨尔托海蛇绿岩块为例

发育于造山带中的蛇绿岩,其剖面下部的地幔橄榄岩部分是造山带地区富集型上地幔的直接标本。其地球化学特点是:主要元素Al_2O_3、TiO_2、CaO、Na_2O、K_2O强烈亏损,而REE,痕量元素和87Sr/86Sr则强烈富集;同时,143Nd/144Nd<0.511836,亦表明它们属于一个富集型的源区。 形成富集型上地幔的主要机制是地幔交代作用,富含不相容元素的低熔岩浆和富Ca-LREE流体与已亏损的地幔橄榄岩发生脉状交代和渗透交代反应,从而造成上地幔中不相容元素的富集。造山带富集型上地幔形成的构造环境是:洋壳从扩张脊向两侧运移并最终拼入造山带这段时间内。富集型上地幔不但存在于大陆区,而且亦存在于造山带地区,它可能是一种全球性的地球内部的化学作用。     

沉积钙质白云石带状面缺陷的择优取向

作者用透射电子显微镜研究了沉积钙质白云石中的带状面缺陷。在衍衬象中面缺陷呈现出特有的条纹衬度,并具有一定的择优取向,它们沿着｛018｝面排列。面缺陷也可分叉,分枝部分平等于｛2－／10｝面。根据白云石面缺陷的取向,本文提出了鞍状白云石宏观弯曲面和微观面缺陷的取向关系。