Water system characteristics of Karst river basins in South China and their driving mechanisms of hydrological drought

Natural Hazards - It is common knowledge that drought is considered one of the most damaging natural disasters in terms of economic costs, societal problems, and ecological impacts. In this study,...     

Volume estimation and stage division of the Mahu landslide in Sichuan Province,China

The Mahu lake, the third deepest lake in China, is located on the west bank of the Jinsha River in Leibo county, Sichuan Province. It is a dammed lake created by an old landslide on the ancient Huanglang river, a tributary on the west bank of the Jinsha River. Previous studies (Wang and Lu in J Mt Res S1:44–47, 2000) suggested that this landslide was caused by an earthquake approximately 372 ka (Middle Pleistocene), during which a few hundreds of million cubic meters of debris were deposited between 1177 and 900 m a.s.l. (above sea level), covering an area of around 15 km². Our further investigations, including geodetic survey, borehole drilling, and field reconnaissance, combining with five chronological data, have made some new discoveries at this site. First, the toe of the landslide extends from 900 m a.s.l. down to 320 m a.s.l., i.e., the local bed elevation of the contemporary Jinsha River. Second, the area of the landslide deposits is 17.3 km² with a volume of 2.38 km³, much larger than the previous estimation. Thus, it should be one of the largest known landslides in China. And the lower elevation of the landslide’s toe also rules out the possibility that it is a hanging valley on the ancient Huanglang river. Our work suggests that this landslide was created by five events according to the overlapping characteristics of the deposits and five chronological data, which are old than 52,600 years, old than 16,000 years, old than 15,500 years, 5800 years, and old than 4200 years, respectively.     

Zircon U-Pb Geochronology,Geochemistry and Petrogenesis of Early Cretaceous A-type Granites in the Mikengshan Area,Southern Jiangxi ProvinceEI北大核心CSCD

In the Mikengshan-Yanbei area, a special region for the tin mineralization in South China, there are some Yanshanian granites and porphyries and associated porphyry tin deposits (e.g., Yanbei). Although the tin mineralization is closely associated with the granitoids magmatism, the age and petrogenesis of the granites remain controversial. The Mikengshan pluton, which intrudes into the rhyolitic tuff and pyroclastic rocks of the Upper Jurassic Jilongzhang Formation, is the largest one in Mikengshan-Yanbei area and mainly consists of K-feldspar bearing granites. In this study, we report new age and geochemical data for the Mikengshan K-feldspar bearing granites. LA-ICP-MS zircon U-Pb age dating shows that they were generated in the Early Cretaceous (~138 Ma). They have high SiO2 (74.42% to 76.69%), low Al2O3 (12.39% to 13.49%) and Mg# (11 to 19), and negative Eu, Sr and Ba anomalies, and are rich in potassium (most K2O/Na2O=1.37 to 1.94) and high field strength elements (HFSEs), and are weakly peraluminous (A/CNK=1.03 to 1.1) with high 10000×Ga/Al ratios (3.46 to 4.96) and slightly high zircon saturation temperatures (807 ℃ to 817 ℃), showing the characteristics of the typical A-type granites. Moreover, they have high Rb contents 842×10-6 to 1295×10-6, Rb/Sr (90 to 255) ratios and show rare earth elements (REE) tetrad effect, which are similar to those of high fractionated granites. Thus, we suggested that the Mikengshan K-feldspar bearing granites are high fractionated and aluminous A-type granite. Their slightly high εNd(t) values (-3.4 to -4.6) indicate that the mantle components should have played a role during their formation. Taking into account regional igneous rocks and tectonic setting data, we suggest that the Mikengshan K-bearing granites were formed in an extensional setting, which was probably related to the roll-back of the subducted Paleo-Pacific plate. © 2018, Science Press. All right reserved.     

Network-based triple-frequency carrier phase ambiguity resolution between reference stations using BDS data for long baselines

Network-based ambiguity resolution (AR) between reference stations is the prerequisite to realize a precise real-time kinematic positioning service. With the help of BDS triple-frequency signals, we can efficiently deal with the ionospheric delay and tropospheric delay, and achieve rapid and reliable AR. To overcome the inaccurate ionospheric delay estimated by the geometry-free three carrier ambiguity resolution (GF TCAR) technique, which leads to failure in the original ambiguity resolution, we propose an ionospheric-free (IF) TCAR method to resolve the ambiguity between the reference stations over long baselines. Taking full advantage of the known positions of the reference stations, the easily resolved extra-wide-lane (EWL) ambiguity, and the IF phase combinations, we can reliably fix the wide-lane (WL) ambiguity. A Kalman filter is applied to estimate precise IF ambiguities and the original ambiguity is resolved with the fixed WL ambiguity. A numerical analysis with triple-frequency BDS data from three long baselines of a CORS network is provided to compare the AR performance of GF TCAR with that of IF TCAR. The results show that both methods can reliably resolve the WL ambiguity with a remarkable correctly-fixed rate of higher than 99%, and the reliably-fixed rates of the IF TCAR slightly increase from 92.19, 94.67 and 94.61–98.26, 99.54 and 97.51% for the three baselines. Herein “correctly-fixed” and “reliably-fixed” mean the difference between the float ambiguity and the true one are less than ± 0.5 and ± 0.25 cycles, respectively. On the other hand, the AR performance of the original signals with the IF TCAR method is much better than that with the GF TCAR method attaining a 100% correctly-fixed rate, while the GF TCAR method can hardly fix the original ambiguity with the largest bias being as much as 4 cycles because of the amplified systematic bias.     

An improved ionosphere interpolation algorithm for network RTK in low-latitude regions

A traditional interpolation algorithm with the linear interpolation method (LIM) using a fixed number of reference stations is widely used in network RTK to obtain the ionospheric delays for the users. In low-latitude regions, where the ionosphere is relatively active, however, large interpolation errors exist, especially for satellites at low elevation angles. Considering the characteristics of “coinciding ionospheric pierce points (CIPPs)” with a similar nature of ionospheric delays, an improved interpolation algorithm is proposed. In this algorithm, all stations with CIPPs are used to establish the interpolation model; thus, more precise interpolation model is achieved. To validate the performance of the proposed algorithm, data from some reference stations in Guangdong Province of China were used, and the results are compared with those with the traditional interpolation algorithm. Numerical analysis shows that the interpolation accuracy of the proposed algorithm increases by 10–30% compared with the traditional one. Since the number of reference stations is flexible, the proposed algorithm can also balance the model accuracy with the computation burdens. In addition, the proposed algorithm is less affected by the selection of master reference station. In terms of network RTK on-the-fly positioning, the time-to-first-fix is reduced when replacing the traditional interpolation algorithm with the proposed one.     

Estimating satellite phase fractional cycle biases based on Kalman filter

Phase fractional cycle biases (FCBs) originating from satellites and receivers destroy the integer nature of PPP carrier phase ambiguities. To achieve integer ambiguity resolution of PPP, FCBs of satellites are required. In former work, least squares methods are commonly adopted to isolate FCBs from a network of reference stations. However, it can be extremely time consuming concerning the large number of observations from hundreds of stations and thousands of epochs. In addition, iterations are required to deal with the one-cycle inconsistency among FCB measurements. We propose to estimate the FCB based on a Kalman filter. The large number of observations are handled epoch by epoch, which significantly reduces the dimension of the involved matrix and accelerates the computation. In addition, it is also suitable for real-time applications. As for the one-cycle inconsistency, a pre-elimination method is developed to avoid iterations and posterior adjustments. A globally distributed network consisting of about 200 IGS stations is selected to determine the GPS satellite FCBs. Observations recorded from DoY 52 to 61 in 2016 are processed to verify the proposed approach. The RMS of wide lane (WL) posterior residuals is 0.09 cycles while that of the narrow lane (NL) is about 0.05 cycles, which indicates a good internal accuracy. The estimated WL FCBs also have a good consistency with existing WL FCB products (e.g., CNES-GRG, WHU-SGG). The RMS of differences with respect to GRG and SGG products are 0.03 and 0.05 cycles. For satellite NL FCB estimates, 97.9% of the differences with respect to SGG products are within ±?0.1 cycles. The RMS of the difference is 0.05 cycles. These results prove the efficiency of the proposed approach.     

Research on Creep Deformation and Control Mechanism of Weak Surrounding Rock in Super Large Section Tunnel

Geotechnical and Geological Engineering - In order to solve the difficulties of creep deformation of surrounding rock in super large section tunnel, taking Letuan tunnel of Binlai expressway, a...     

基于弱光栅技术的地面沉降自动化监测系统

光纤监测技术具有分布式、精度高等特点,在地面沉降监测中具有独特优势。但受限于监测成本较高与监测环境复杂,目前地面沉降光纤监测多通过人工采集数据,限制了在特殊环境变化情况下地面沉降的实时信息获取。文章在地面沉降钻孔全断面光纤监测技术的基础上,设计并建立了基于弱光栅技术的地面沉降自动化监测系统。该监测系统利用弱反射光栅、时分复用、物联网和数据库等技术,通过4G无线通信手段实现了地面沉降在线自动化监测和远程数据实时采集,并通过客户端系统软件实现数据的存储、查询和分析。将其应用到衡水地区地面沉降监测中,结果表明:钻孔内土层压缩变形主要发生在以黏性土为主的隔水层（Ad2、Ad3、Ad4）;受季节性地下水开采的影响,钻孔100～400 m深度范围内砂土含水层存在波动变化,在监测期内,冬季略回弹,随后春季地下水开采量增大,地下水位下降,土层呈现压缩趋势。监测结果验证了该系统的可行性与准确性,使得整个地面沉降监测流程趋于自动化、规范化和低成本化,具有广泛的应用前景。     

四川省大地构造单元划分及其基本特征

四川省大地构造演化研究已有百余年的历史,不同时期、不同学派在不同的尺度上提出了不同的大地构造单元划分方案,其中仍存在诸多争议。本文结合近30年来四川省特别是造山带地区开展的蛇绿岩和洋板块地层等调查和研究成果,以李廷栋所提出的洋板块地质学理念为指导思想,以区域主构造事件形成的优势大地构造相的时空结构组合和存在状态为基本原则,划分出秦-祁-昆造山系、勉县-略阳对接带、北羌塘-三江造山系以及扬子克拉通4个一级构造单元,包括11个二级构造单元和24个三级构造单元。     

四川盆地东部中二叠统茅口组热液活动特征

四川盆地中二叠统茅口组存在丰富的热液流体活动。在野外剖面和岩心观察的基础上,利用多种分析测试方法,对四川盆地东部茅口组碳酸盐岩中的热液活动特征进行了探讨。研究区茅口组热液活动包括2类,一类为硅质热液,表现为薄层硅质岩或硅质团块;另一类为碳酸盐型热液,表现为粗晶方解石和白云石充填在张性构造裂缝中或呈"雪片状"集合体,偶见少量黄铁矿、闪锌矿等金属硫化物伴生。硅质岩主量元素之间的关系表明硅质来源具有多样性,是热液硅与壳源硅的混合;黄铁矿、闪锌矿原位S同位素δ34S介于-3.91‰~-6.87‰之间,推测可能受到了微生物和基性岩浆岩的双重影响;方解石脉和具鞍状双晶的白云石脉普遍具有Ca O高于标准计量、相对富Sr和U、贫REE和Ti、Ce/Ce*明显负异常、Eu/Eu*主体正异常、Y正异常等特征,表明碳酸盐脉为热液活动的产物,流体来源也呈现出火山活动相关流体与富钙地下水混合的特点。闪锌矿富集Ge和Cd,Zn/Cd及Zn/Fe值反映了中等成矿温度。硅质岩和碳酸盐流体包裹体均一温度变化范围较大,介于54.7~294.3℃之间,与稀土元素和微量元素比值所揭示的特征吻合。研究结果表明,穿层状硅质结核和团块的首次出现往往标志着茅口组热液活动的开始,而张性构造裂缝和碳酸盐型热液活动带来的围岩白云化作用则有效地改善了白云岩储集层的物性。