自动化监测技术在我国首条大型电力隧道中的应用

通过自动化监测在超大工程项目中的应用,利用现有技术手段,对工程进行有效管理,逐渐将对工程的安全、预判起到越来越重要的作用,它可以在为工程节约大量资金情况下,提高预判安全施工的能力,是提高工程管理的重要手段。     

地铁施工对济南白泉泉群流量的影响

为研究地铁建设对济南白泉泉群的影响，在综合分析白泉泉域地质、水文地质条件的基础上，假定研究区岩溶强径流带位置及水力性质，利用FEFLOW软件建立地下水流数值模型。以规划地铁M1号线为研究对象，分析了济南东站、梁王站、梁王东站分别施工及3个站同时施工4种情景下，采用施工降水或施工降水+人工回灌两种施工方式对白泉泉群流量的影响。结果表明：单独采用施工降水的施工方式使得白泉泉群流量衰减，其中3个站同时施工对泉流量的影响最大，泉流量最大衰减达5.48%；各站分别施工时，济南东站对泉流量影响最大，泉流量较未施工时减少了0.043×10⁴ m³/d。采用施工降水+人工回灌的施工方式，能够有效缓解泉流量的衰减，各车站施工时的泉流量衰减由仅施工降水时的2.26%~5.48%降低至0.08%~1.21%。岩溶强径流带有利于地下水形成优势径流，促进白泉泉群补给，一定程度上缓解因地铁施工引起的泉流量衰减。     

北京云蒙山地区花岗岩穹隆及伸展构造的探讨

北京云蒙山花岗岩为一中生代侵入的花岗岩穹隆,花岗岩穹隆的叶理普遍发育,叶理轨迹基本平行于穹隆的外部边界,并显示出从核部到边部逐渐增强,东南侧明显强于西北侧的特点。变形构造研究显示,花岗岩穹隆的边部及围岩中普遍存在不同层次及不同运动方向的伸展构造。东南侧以具河防口－水峪伸展型韧性剪切带为特征,剪切运动标志显示为从ＮＷ－ＳＥ的正剪切运动,有限应变分析估算其剪切位移量在１０ｋｍ以上,剪切带上部被河防口正     

The Ore-forming Fluid of the Gold Deposits of Muru Gold Belt in Eastern Shandong, China - a Case Study of Denggezhuang Gold Deposit

Abstract. Denggezhuang gold deposit is an epithermal gold‐quartz vein deposit in northern Muru gold belt, eastern Shandong, China. The deposit occurs in the NNE‐striking faults within the Mesozoic granite. The deposit consists of four major veins with a general NNE‐strike. Based on crosscutting relationships and mineral parageneses, the veins appear to have been formed during the same mineralization epochs, and are further divided into three stages: (1) massive barren quartz veins; (2) quartz‐sulfides veins; (3) late, pure quartz or calcite veinlets. Most gold mineralization is associated with the second stage. The early stage is characterized by quartz, and small amounts of ore minerals (pyrite), the second stage is characterized by large amounts of ore minerals. Fluid inclusions in vein quartz contain C‐H‐O fluids of variable compositions. Three main types of fluid inclusions are recognized at room temperature: type I, two‐phase, aqueous vapor and an aqueous liquid phase (L+V); type II, aqueous‐carbonic inclusions, a CC₂‐liquid with/without vapor and aqueous liquid (LCO₂+VCC₂+Laq.); type III, mono‐phase aqueous liquid (Laq.). Data from fluid inclusion distribution, microthermometry, and gas analysis indicate that fluids associated with Au mineralized quartz veins (stage 2) have moderate salinity ranging from 1.91 to 16.43 wt% NaCl equivalent (modeled salinity around 8–10 wt% NaCl equiv.). These veins formatted at temperatures from 80d? to 280d?C. Fluids associated with barren quartz veins (stage 3) have a low salinity of about 1.91 to 2.57 wt% NaCl equivalent and lower temperature. There is evidence of fluid immiscibility and boiling in ore‐forming stages. Stable isotope analyses of quartz indicate that the veins were deposited by waters with δ^O and δD values ranging from those of magmatic water to typical meteoric water. The gold metallogenesis of Muru gold belt has no relationship with the granite, and formed during the late stage of the crust thinning of North China.     

Structural Evolvement of Heating Treatment of Mg/AI-LDH and Preparation of Mineral Mesoporous Materials

Although hydrotalcite, or layered double hydroxides （LDHs）, is not a common mineral, it is an important material that can be easily synthesized in laboratory. In this study, structural evolvement and BET surface area changes of heat treated Mg/AI-LDH is evaluated by XRD, TEM and N2-BET analyses. The results indicate that the magnesium-aluminum LDH with carbonate as interlayer anion, periclase-like oxides was formed at temperatures of 400-800℃. Meanwhile, 2-3 nanometer mesoporous were formed during decomposition of LDH. However, the heat treated samples still preserve the morphology of the original LDH plates. Periclase-like formed from LDH heat treatment may re-hydrolyze and recover the structure of LDH. However, crystallinity of the recovered LDH is lower than that of the original LDH. This heat treatment will result in formation of （Mg, Al）-oxide nano-crystals and nanopores among the nano-crystals. When heating temperature exceeds 1000, the periclase-like （Mg, Al）-oxide is transformed into a composite with periclase （MgO） and spinel phases. The periclase can be re-hydrolyzed and dissolved in HCl solution. After acid treatment, the sample with a high surface area is composed of spinel nano-crystals and nanopores among them. Our results will provide a new and economic way to synthesize mesoporous materials through pathways of phase transformation of precursor materials with different composition.     

高三学生地理自主学习能力的培养

本文以高三地理教学为例,着重阐释了用新课程的视角重新审视地理双基的基本观点,阐述了分析筛选地理主干知识的具体方法,以及地理学科读图的规范和技巧,并从完善认知层次、分析主导因素、注重知识内化、形成迁移能力、培养辩证思维、讲究科学表述等方面论述了高三地理的复习教学策略。     

大气CO2浓度升高对土壤中不同粒级碳的影响

不同粒级土壤中的碳有着不同的周转规律，在高CO2浓度条件下，它们含量的变化将在一定程度上反映土壤碳是累积还是减少，对明确土壤碳的变化趋势有重要意义．采用田间培养试验初步模拟研究在高CO2浓度条件下土壤不同粒级碳的分布．结果表明，加入秸秆培养1年，由于CO2浓度升高的原因导致在低氮（LN）、常规氮（NN）和高氮（HN）水平下土壤中碳分别增加0．01、1．10、1．22g／kg，表现为粒级〈53μm土壤颗粒中碳分别增加1．53、2．19、2．70g／kg．粒级〈53μmm土壤颗粒碳量的增加，主要是由于其重量分配百分数显著增加36．2％，碳浓度增加5．4％；粒级〉250μm和250～53μm土壤颗粒部分虽然其碳浓度分别增加20．8％和17．3％（P〈0．05），怛由于重量分配百分数分别显著降低22．8％和36．1％，结果碳量降低．试验表明高CO2浓度导致不同粒级土壤的分配及碳浓度的变化；高氮施肥水平下有增加土壤碳量特别是小粒级土壤碳量的趋势．     

福建平潭虎潮山滑坡成因机理分析与评价

虎潮山滑坡位于平宏公路12k 704~12k 884段北侧山坡体上,是平潭海岛通往陆地的唯一公路通道。论文通过定性的工程地质分析和定量计算评价了虎潮山坡体稳定性的变化趋势,提出改建公路超挖深切坡脚和持续长时间强降雨导致的孔隙水压力作用是边坡发生滑动破坏的主要因素。     

油页岩综合利用对周围环境的影响——以抚顺矿区为例

世界能源日益减少的局面为油页岩的开发应用带来广阔的前景，但油页岩工业所带来的环境影响亦不容忽视。以抚顺油页岩为例，从油页岩综合利用和油页岩工业对环境的影响等方面系统讨论了在我国发展油页岩工业时，如何本着节约能源、保护环境、实现可持续发展的观念，利用现有先进技术，科学发展油页岩工业，降低生产过程中的固、液、气污染物对环境的危害。     

基于数据手套和跟踪器的虚拟手臂建模

文中利用数据手套和跟踪器获取手臂各关节运动数据,根据关节运动限制对所获取数据进行处理,建立了符合人体运动规律的虚拟手臂数学模型,实现了虚拟环境中与试验者的手臂同步运动、效果逼真的虚拟手臂模型.