Source parameters of bohai earthquake, July 18, 1969 and yongshan earthquake, May 11, 1974 determined by synthetic seismograms of teleseismic P waves

The source parameters of the Bohai Sea earthquake, July 18, 1969 and Yongshan, Yunnan earthquake, May 11, 1974 were determined by full — wave theory synthetic seismograms of teleseismic P waves. P+pP+sP wereform were calculated with WKBJ approximation and real integral paths. One — dimensional unilateral, finite propagation source was also considered. By trail — and — error in comparing the theoretical seismograms with the observational ones of WWSSN stations, the source parameters were obtained as follow: for Bohai earthquake, φ=195°, δ=85°, λ=65°,M _o=0.9×10¹⁹Nm,L=59.9km.V _R=3.5km/s, ∧ _R =160°; for Yongshan earthquake, φ=240°, δ=80°, ∧=150°,M _o=1.3×10¹⁸Nm,L=48.8km,V _R=3km/s, ∧ _R =−10°, where φ is strike, δ dip angle, λ slip angle,M _o seismic moment,L rupture length,V _R rupture propagation speed. As III type fractures the faulting propagated along the fault planes, and ∧ _R is the angle from the strike to the propagation direction. Yongshan earthquake showed complexity in its focal process, having four sub—ruptures during the first 60 seconds. The Chinese version of this paper appeared in the Chinese edition ofActa Seismologica Sinica,13, 1–8, 1991.     

A fewest-turn-and-shortest path algorithm based on breadth-first search

Many cognitive studies have indicated that the path simplicity may be as important as its distance travelled. However, the optimality of paths for current navigation system is often judged purely on the distance travelled or time cost, and not the path simplicity. To balance these factors, this paper presented an algorithm to compute a path that not only possesses fewest turns but also is as short as possible by utilizing the breadth-first-search strategy. The proposed algorithm started searching from a starting point, and expanded layer by layer through searching zero-level reachable points until the endpoint is found, and then deleted unnecessary points in the reverse direction. The forward searching and backward cleaning strategies were presented to build a hierarchical graph of zero-level reachable points, and form a fewest-turn-path graph (G*). After that, a classic Dijkstra shortest path algorithm was executed on the G* to obtain a fewest-turn-and-shortest path. Comparing with the shortest path in Baidu map, the algorithm in this work has less than half of the turns but the nearly same length. The proposed fewest-turn-and-shortest path algorithm is proved to be more suitable for human beings according to human cognition research.     

基于二维地质剖面的三维地质结构多点统计学模拟方法

利用三维地质模拟技术重构地质现象的三维空间分布,是实现自然资源管理和风险评估的重要基础和前提。多点统计学方法通过探寻多点间的空间结构关系,结合随机模拟方法生成具有差异性的模拟结果,较好地再现了复杂的地质现象。然而,如何构建合适、有效的训练图像一直是基于多点统计学三维地质模拟的核心问题。本文提出了一种改进的多点统计学算法。本方法结合了序贯模拟和迭代的方法,将二维剖面扩展为三维训练图像,再结合EM-Like算法,实现了三维地质结构的优化模拟。建模实例结果表明,本方法能确保训练图像对内部模拟网格的约束,准确模拟研究区的地层层序,并很好地再现二维地质剖面所反映的地层结构关系。     

潮间浅滩泥沙运移的现场观测和冲淤量的估算

首先介绍了在潮间浅滩观测泥沙远移的两种新工具──标志桩和沉沙盘的基本结构、工作原理和使用方法。然后通过实例阐明了利用标志桩、沉沙盘观测资料研究潮间浅滩冲淤变化及冲淤量估算的途径及方法。     

近河砂土地基深基坑支护及地下水控制

通过福州闽江毗岸的元洪城一期工程基坑支护及地下水控制的实践,阐述了采用水泥土搅拌桩支护及坑内降水可以解决近河砂土地基中深基坑开挖的技术难题     

水体系中高砷去除方法探讨

从分析砷的赋存状态及理化特性入手 ,探讨了除去水中高砷的各种方法及特点。结果表明 ,硫化铁、海泡石法去除砷效率最高 ,曝气法、铁盐法以及粉煤灰法处理成本相对较低 ,而海泡石法成本最低廉 ,且不带来二次污染 ,是处理饮用水的理想方法。     

东海北部海水中硝酸盐(NO_3-N)的分布及其成因

本文根据“中日黑潮合作调查”在东海的调查资料,探讨了硝酸盐的分布特征,以及水文条件对其分布的影响,并比较了不同年份夏季硝酸盐的分布差异及其原因。分析表明,表层海水中硝酸盐分布明显受长江冲淡水影响,陆架区测值高于外海,冬季测值高于夏季; ５０ｍ ,１００ｍ 层上陆架、黑潮锋区存在着硝酸盐锋面,黑潮主干的摆动可能是影响锋面位置的主要因素     

2022年震情述评

<正>1全球地震活动概况据中国地震台网测定,2022年1月1日—12月31日,全球共发生6级以上地震112次,其中7级以上地震7次,最大地震为9月11日巴布亚新几内亚7.6级地震(图1)。1.1全球7级以上大震活动明显偏弱2022年全球共发生7级以上地震7次,最大地震为9月11日巴布亚新几内亚7.6级地震。全球7级以上地震强度较2021年有所降低,频次显著低于1900年以来年均20次的活动水平,且显著低于2021年(解孟雨等,2021;马亚伟等,2022),2022年全球7级以上地震频次为1900年以来最低水平(图2)。     

三层模型背风波的计算分析和数值模拟

本文将背风波三层模式的理论应用于典型的背风波个例,判断了其解所属的类型,计算了这些个例的波长;指出当有多个波解存在时,最长波长所对应的波解是实际解;本文还用ARPS模式对这些个例作了数值模拟,模拟结果与解析解则有较好的一致性。     

A study of the environmental influence on the amplitude of lee waves

A three-layer theoretical model is used to calculate the lee wave of a real example occurring over Blue Ridge in Pittsburgh, in which the maximum vertical velocity is 0.11 m s^-1. Based on this, the influence of changes in the thickness and values of the Scorer parameter in each layer are analyzed. It is shown that the influence of each layer parameters on the lee-wave amplitude is different, and the amplitude is more sensitive to the changes in the lower layer. Since the environment changes can affect the Scorer parameter profile, the influence of the environment on the amplitude is studied. The results show that the amplitude will decrease in the daytime because of solar heating, and increase at night because of radiational cooling, according to observational data. The case is also simulated by the Advanced Regional Prediction System （ARPS） model. The simulated amplitude is 0.089 m s^-1, which is close to the calculated result. Numerical sensitivity experiments are performed to test the former calculated experiments. The simulated results are consistent with the analytically calculated results.